[PATCH v2 01/11] media: ccs-pll: Start OP pre-PLL multiplier search from correct value

[Sakari Ailus <sakari.ailus@linux.intel.com>]

The ccs_pll_calculate() function does a search over possible PLL
configurations to find the "best" one. If the sensor did not support odd
pre-PLL divisors and the minimum value (with constraints) wasn't 1, other
even values could have errorneously searched (and selected) for the
pre-PLL divisor. Fix this.

Fixes: 415ddd993978 ("media: ccs-pll: Split limits and PLL configuration into front and back parts")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
 drivers/media/i2c/ccs-pll.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/media/i2c/ccs-pll.c b/drivers/media/i2c/ccs-pll.c
index 34ccda666524..e516ed23e899 100644
--- a/drivers/media/i2c/ccs-pll.c
+++ b/drivers/media/i2c/ccs-pll.c
@@ -815,6 +815,8 @@ int ccs_pll_calculate(struct device *dev, const struct ccs_pll_limits *lim,
 			      one_or_more(
 				      DIV_ROUND_UP(op_lim_fr->max_pll_op_clk_freq_hz,
 						   pll->ext_clk_freq_hz))));
+	if (!(pll->flags & CCS_PLL_FLAG_EXT_IP_PLL_DIVIDER))
+		min_op_pre_pll_clk_div = clk_div_even(min_op_pre_pll_clk_div);
 	dev_dbg(dev, "pll_op check: min / max op_pre_pll_clk_div: %u / %u\n",
 		min_op_pre_pll_clk_div, max_op_pre_pll_clk_div);
 
-- 
2.39.5