From: Jagan Teki <jagan@amarulasolutions.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v5 01/26] clk: Add Allwinner A64 CLK driver
Date: Mon, 31 Dec 2018 22:29:02 +0530 [thread overview]
Message-ID: <20181231165927.13803-2-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20181231165927.13803-1-jagan@amarulasolutions.com>
Add initial clock driver for Allwinner A64.
Implement USB clock enable and disable functions for
OHCI, EHCI, OTG and USBPHY gate and clock registers
via ccu clk gate table.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
arch/arm/include/asm/arch-sunxi/ccu.h | 65 +++++++++++++++++++++++
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/sunxi/Kconfig | 18 +++++++
drivers/clk/sunxi/Makefile | 9 ++++
drivers/clk/sunxi/clk_a64.c | 46 +++++++++++++++++
drivers/clk/sunxi/clk_sunxi.c | 74 +++++++++++++++++++++++++++
7 files changed, 214 insertions(+)
create mode 100644 arch/arm/include/asm/arch-sunxi/ccu.h
create mode 100644 drivers/clk/sunxi/Kconfig
create mode 100644 drivers/clk/sunxi/Makefile
create mode 100644 drivers/clk/sunxi/clk_a64.c
create mode 100644 drivers/clk/sunxi/clk_sunxi.c
diff --git a/arch/arm/include/asm/arch-sunxi/ccu.h b/arch/arm/include/asm/arch-sunxi/ccu.h
new file mode 100644
index 0000000000..db69c8f0d5
--- /dev/null
+++ b/arch/arm/include/asm/arch-sunxi/ccu.h
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Amarula Solutions.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#ifndef _ASM_ARCH_CCU_H
+#define _ASM_ARCH_CCU_H
+
+/**
+ * enum ccu_clk_flags - ccu clock flags
+ *
+ * @CCU_CLK_F_INIT_DONE: clock gate init done check
+ */
+enum ccu_clk_flags {
+ CCU_CLK_F_INIT_DONE = BIT(0),
+};
+
+/**
+ * struct ccu_clk_gate - ccu clock gate
+ * @off: gate offset
+ * @bit: gate bit
+ * @flags: clock gate flags
+ */
+struct ccu_clk_gate {
+ u16 off;
+ u32 bit;
+ enum ccu_clk_flags flags;
+};
+
+#define GATE(_off, _bit) { \
+ .off = _off, \
+ .bit = _bit, \
+ .flags = CCU_CLK_F_INIT_DONE, \
+}
+
+/**
+ * struct ccu_desc - clock control unit descriptor
+ *
+ * @gates: clock gates
+ */
+struct ccu_desc {
+ const struct ccu_clk_gate *gates;
+};
+
+/**
+ * struct ccu_priv - sunxi clock control unit
+ *
+ * @base: base address
+ * @desc: ccu descriptor
+ */
+struct ccu_priv {
+ void *base;
+ const struct ccu_desc *desc;
+};
+
+/**
+ * sunxi_clk_probe - common sunxi clock probe
+ * @dev: clock device
+ */
+int sunxi_clk_probe(struct udevice *dev);
+
+extern struct clk_ops sunxi_clk_ops;
+
+#endif /* _ASM_ARCH_CCU_H */
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index eadf7f8250..51c931b906 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -104,6 +104,7 @@ source "drivers/clk/imx/Kconfig"
source "drivers/clk/mvebu/Kconfig"
source "drivers/clk/owl/Kconfig"
source "drivers/clk/renesas/Kconfig"
+source "drivers/clk/sunxi/Kconfig"
source "drivers/clk/tegra/Kconfig"
source "drivers/clk/uniphier/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 9acbb1a650..6a4ff9143b 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_CLK_HSDK) += clk-hsdk-cgu.o
obj-$(CONFIG_CLK_MPC83XX) += mpc83xx_clk.o
obj-$(CONFIG_CLK_OWL) += owl/
obj-$(CONFIG_CLK_RENESAS) += renesas/
+obj-$(CONFIG_ARCH_SUNXI) += sunxi/
obj-$(CONFIG_CLK_STM32F) += clk_stm32f.o
obj-$(CONFIG_CLK_STM32MP1) += clk_stm32mp1.o
obj-$(CONFIG_CLK_UNIPHIER) += uniphier/
diff --git a/drivers/clk/sunxi/Kconfig b/drivers/clk/sunxi/Kconfig
new file mode 100644
index 0000000000..bf5ecb3801
--- /dev/null
+++ b/drivers/clk/sunxi/Kconfig
@@ -0,0 +1,18 @@
+config CLK_SUNXI
+ bool "Clock support for Allwinner SoCs"
+ depends on CLK && ARCH_SUNXI
+ default y
+ help
+ This enables support for common clock driver API on Allwinner
+ SoCs.
+
+if CLK_SUNXI
+
+config CLK_SUN50I_A64
+ bool "Clock driver for Allwinner A64"
+ default MACH_SUN50I
+ help
+ This enables common clock driver support for platforms based
+ on Allwinner A64 SoC.
+
+endif # CLK_SUNXI
diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
new file mode 100644
index 0000000000..fb20d28333
--- /dev/null
+++ b/drivers/clk/sunxi/Makefile
@@ -0,0 +1,9 @@
+#
+# Copyright (C) 2018 Amarula Solutions.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-$(CONFIG_CLK_SUNXI) += clk_sunxi.o
+
+obj-$(CONFIG_CLK_SUN50I_A64) += clk_a64.o
diff --git a/drivers/clk/sunxi/clk_a64.c b/drivers/clk/sunxi/clk_a64.c
new file mode 100644
index 0000000000..803a2f711d
--- /dev/null
+++ b/drivers/clk/sunxi/clk_a64.c
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Amarula Solutions.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include <common.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <errno.h>
+#include <asm/arch/ccu.h>
+#include <dt-bindings/clock/sun50i-a64-ccu.h>
+
+static const struct ccu_clk_gate a64_gates[] = {
+ [CLK_BUS_OTG] = GATE(0x060, BIT(23)),
+ [CLK_BUS_EHCI0] = GATE(0x060, BIT(24)),
+ [CLK_BUS_EHCI1] = GATE(0x060, BIT(25)),
+ [CLK_BUS_OHCI0] = GATE(0x060, BIT(28)),
+ [CLK_BUS_OHCI1] = GATE(0x060, BIT(29)),
+
+ [CLK_USB_PHY0] = GATE(0x0cc, BIT(8)),
+ [CLK_USB_PHY1] = GATE(0x0cc, BIT(9)),
+ [CLK_USB_HSIC] = GATE(0x0cc, BIT(10)),
+ [CLK_USB_HSIC_12M] = GATE(0x0cc, BIT(11)),
+ [CLK_USB_OHCI0] = GATE(0x0cc, BIT(16)),
+ [CLK_USB_OHCI1] = GATE(0x0cc, BIT(17)),
+};
+
+static const struct ccu_desc a64_ccu_desc = {
+ .gates = a64_gates,
+};
+
+static const struct udevice_id a64_ccu_ids[] = {
+ { .compatible = "allwinner,sun50i-a64-ccu",
+ .data = (ulong)&a64_ccu_desc },
+ { }
+};
+
+U_BOOT_DRIVER(clk_sun50i_a64) = {
+ .name = "sun50i_a64_ccu",
+ .id = UCLASS_CLK,
+ .of_match = a64_ccu_ids,
+ .priv_auto_alloc_size = sizeof(struct ccu_priv),
+ .ops = &sunxi_clk_ops,
+ .probe = sunxi_clk_probe,
+};
diff --git a/drivers/clk/sunxi/clk_sunxi.c b/drivers/clk/sunxi/clk_sunxi.c
new file mode 100644
index 0000000000..345d706c2a
--- /dev/null
+++ b/drivers/clk/sunxi/clk_sunxi.c
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Amarula Solutions.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include <common.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <asm/arch/ccu.h>
+#include <linux/log2.h>
+
+static const struct ccu_clk_gate *priv_to_gate(struct ccu_priv *priv,
+ unsigned long id)
+{
+ return &priv->desc->gates[id];
+}
+
+static int sunxi_set_gate(struct clk *clk, bool on)
+{
+ struct ccu_priv *priv = dev_get_priv(clk->dev);
+ const struct ccu_clk_gate *gate = priv_to_gate(priv, clk->id);
+ u32 reg;
+
+ if (!(gate->flags & CCU_CLK_F_INIT_DONE)) {
+ printf("%s: (CLK#%ld) unhandled\n", __func__, clk->id);
+ return 0;
+ }
+
+ debug("%s: (CLK#%ld) off#0x%x, BIT(%d)\n", __func__,
+ clk->id, gate->off, ilog2(gate->bit));
+
+ reg = readl(priv->base + gate->off);
+ if (on)
+ reg |= gate->bit;
+ else
+ reg &= ~gate->bit;
+
+ writel(reg, priv->base + gate->off);
+
+ return 0;
+}
+
+static int sunxi_clk_enable(struct clk *clk)
+{
+ return sunxi_set_gate(clk, true);
+}
+
+static int sunxi_clk_disable(struct clk *clk)
+{
+ return sunxi_set_gate(clk, false);
+}
+
+struct clk_ops sunxi_clk_ops = {
+ .enable = sunxi_clk_enable,
+ .disable = sunxi_clk_disable,
+};
+
+int sunxi_clk_probe(struct udevice *dev)
+{
+ struct ccu_priv *priv = dev_get_priv(dev);
+
+ priv->base = dev_read_addr_ptr(dev);
+ if (!priv->base)
+ return -ENOMEM;
+
+ priv->desc = (const struct ccu_desc *)dev_get_driver_data(dev);
+ if (!priv->desc)
+ return -EINVAL;
+
+ return 0;
+}
--
2.18.0.321.gffc6fa0e3
next prev parent reply other threads:[~2018-12-31 16:59 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-31 16:59 [U-Boot] [PATCH v5 00/26] clk: Add Allwinner CLK, RESET support Jagan Teki
2018-12-31 16:59 ` Jagan Teki [this message]
2018-12-31 16:59 ` [U-Boot] [PATCH v5 02/26] reset: Add Allwinner RESET driver Jagan Teki
2019-01-10 0:50 ` André Przywara
2018-12-31 16:59 ` [U-Boot] [PATCH v5 03/26] clk: sunxi: Add Allwinner H3/H5 CLK driver Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 04/26] clk: sunxi: Add Allwinner A10/A20 " Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 05/26] clk: sunxi: Add Allwinner A10s/A13 " Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 06/26] clk: sunxi: Add Allwinner A31 " Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 07/26] clk: sunxi: Add Allwinner A23/A33 " Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 08/26] clk: sunxi: Add Allwinner A83T " Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 09/26] clk: sunxi: Add Allwinner R40 " Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 10/26] clk: sunxi: Add Allwinner V3S " Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 11/26] clk: sunxi: Implement UART clocks Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 12/26] clk: sunxi: Implement UART resets Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 13/26] clk: sunxi: Add Allwinner H6 CLK driver Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 14/26] sunxi: A64: Update sun50i-a64-ccu.h Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 15/26] clk: sunxi: Add ccu clock tree support Jagan Teki
2019-01-07 1:03 ` André Przywara
2019-01-07 13:01 ` Maxime Ripard
2019-01-07 14:09 ` Andre Przywara
2019-01-07 18:25 ` Maxime Ripard
2019-01-08 10:57 ` Jagan Teki
2019-01-08 11:39 ` Andre Przywara
2019-01-08 19:12 ` Jagan Teki
2019-01-10 0:50 ` André Przywara
2019-01-10 18:31 ` Jagan Teki
2019-01-08 11:25 ` Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 16/26] sunxi: Enable CLK Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 17/26] phy: sun4i-usb: Use CLK and RESET support Jagan Teki
2018-12-31 18:29 ` Marek Vasut
2018-12-31 18:38 ` Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 18/26] reset: Add reset valid Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 19/26] musb-new: sunxi: Use CLK and RESET support Jagan Teki
2018-12-31 18:30 ` Marek Vasut
2018-12-31 16:59 ` [U-Boot] [PATCH v5 20/26] sunxi: usb: Switch to Generic host controllers Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 21/26] usb: host: Drop [e-o]hci-sunxi drivers Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 22/26] clk: sunxi: Implement SPI clocks Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 23/26] spi: sun4i: Add CLK support Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 24/26] clk: sunxi: Implement A64 SPI clocks, resets Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 25/26] spi: Add Allwinner A31 SPI driver Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 26/26] board: sopine: Enable SPI/SPI-FLASH Jagan Teki
2019-01-07 13:04 ` Maxime Ripard
2019-01-22 16:32 ` Alexander Graf
2019-01-22 16:40 ` Andre Przywara
2019-01-22 16:47 ` Tom Rini
2019-01-06 9:39 ` [U-Boot] [PATCH v5 00/26] clk: Add Allwinner CLK, RESET support Jagan Teki
2019-01-06 13:17 ` André Przywara
2019-01-06 19:22 ` Jagan Teki
2019-01-07 1:21 ` André Przywara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181231165927.13803-2-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox