From: Jagan Teki <jagan@amarulasolutions.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v5 23/26] spi: sun4i: Add CLK support
Date: Mon, 31 Dec 2018 22:29:24 +0530 [thread overview]
Message-ID: <20181231165927.13803-24-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20181231165927.13803-1-jagan@amarulasolutions.com>
Add CLK support to enable AHB and MOD SPI clocks
on sun4i_spi driver.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
drivers/spi/sun4i_spi.c | 46 +++++++++++++++++++++++++++++++++++------
1 file changed, 40 insertions(+), 6 deletions(-)
diff --git a/drivers/spi/sun4i_spi.c b/drivers/spi/sun4i_spi.c
index b86b5a00ad..5b01aa4226 100644
--- a/drivers/spi/sun4i_spi.c
+++ b/drivers/spi/sun4i_spi.c
@@ -19,6 +19,7 @@
*/
#include <common.h>
+#include <clk.h>
#include <dm.h>
#include <spi.h>
#include <errno.h>
@@ -114,6 +115,8 @@ struct sun4i_spi_platdata {
struct sun4i_spi_priv {
struct sun4i_spi_regs *regs;
+ struct clk ahb_clk;
+ struct clk mod_clk;
u32 freq;
u32 mode;
@@ -238,13 +241,40 @@ static int sun4i_spi_parse_pins(struct udevice *dev)
return 0;
}
-static inline void sun4i_spi_enable_clock(void)
+static inline int sun4i_spi_enable_clock(struct udevice *dev)
{
- struct sunxi_ccm_reg *const ccm =
- (struct sunxi_ccm_reg *const)SUNXI_CCM_BASE;
+ struct sun4i_spi_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ ret = clk_get_by_name(dev, "ahb", &priv->ahb_clk);
+ if (ret) {
+ dev_err(dev, "failed to get ahb clock\n");
+ return ret;
+ }
+
+ ret = clk_get_by_name(dev, "mod", &priv->mod_clk);
+ if (ret) {
+ dev_err(dev, "failed to get mod clock\n");
+ return ret;
+ }
+
+ ret = clk_enable(&priv->ahb_clk);
+ if (ret) {
+ dev_err(dev, "failed to enable ahb clock (ret=%d)\n", ret);
+ return ret;
+ }
+
+ ret = clk_enable(&priv->mod_clk);
+ if (ret) {
+ dev_err(dev, "failed to enable mod clock (ret=%d)\n", ret);
+ goto err_ahb;
+ }
- setbits_le32(&ccm->ahb_gate0, (1 << AHB_GATE_OFFSET_SPI0));
- writel((1 << 31), &ccm->spi0_clk_cfg);
+ return 0;
+
+err_ahb:
+ clk_disable(&priv->ahb_clk);
+ return ret;
}
static int sun4i_spi_ofdata_to_platdata(struct udevice *bus)
@@ -267,8 +297,12 @@ static int sun4i_spi_probe(struct udevice *bus)
{
struct sun4i_spi_platdata *plat = dev_get_platdata(bus);
struct sun4i_spi_priv *priv = dev_get_priv(bus);
+ int ret;
+
+ ret = sun4i_spi_enable_clock(bus);
+ if (ret)
+ return ret;
- sun4i_spi_enable_clock();
sun4i_spi_parse_pins(bus);
priv->regs = (struct sun4i_spi_regs *)(uintptr_t)plat->base_addr;
--
2.18.0.321.gffc6fa0e3
next prev parent reply other threads:[~2018-12-31 16:59 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-31 16:59 [U-Boot] [PATCH v5 00/26] clk: Add Allwinner CLK, RESET support Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 01/26] clk: Add Allwinner A64 CLK driver Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 02/26] reset: Add Allwinner RESET driver Jagan Teki
2019-01-10 0:50 ` André Przywara
2018-12-31 16:59 ` [U-Boot] [PATCH v5 03/26] clk: sunxi: Add Allwinner H3/H5 CLK driver Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 04/26] clk: sunxi: Add Allwinner A10/A20 " Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 05/26] clk: sunxi: Add Allwinner A10s/A13 " Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 06/26] clk: sunxi: Add Allwinner A31 " Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 07/26] clk: sunxi: Add Allwinner A23/A33 " Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 08/26] clk: sunxi: Add Allwinner A83T " Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 09/26] clk: sunxi: Add Allwinner R40 " Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 10/26] clk: sunxi: Add Allwinner V3S " Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 11/26] clk: sunxi: Implement UART clocks Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 12/26] clk: sunxi: Implement UART resets Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 13/26] clk: sunxi: Add Allwinner H6 CLK driver Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 14/26] sunxi: A64: Update sun50i-a64-ccu.h Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 15/26] clk: sunxi: Add ccu clock tree support Jagan Teki
2019-01-07 1:03 ` André Przywara
2019-01-07 13:01 ` Maxime Ripard
2019-01-07 14:09 ` Andre Przywara
2019-01-07 18:25 ` Maxime Ripard
2019-01-08 10:57 ` Jagan Teki
2019-01-08 11:39 ` Andre Przywara
2019-01-08 19:12 ` Jagan Teki
2019-01-10 0:50 ` André Przywara
2019-01-10 18:31 ` Jagan Teki
2019-01-08 11:25 ` Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 16/26] sunxi: Enable CLK Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 17/26] phy: sun4i-usb: Use CLK and RESET support Jagan Teki
2018-12-31 18:29 ` Marek Vasut
2018-12-31 18:38 ` Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 18/26] reset: Add reset valid Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 19/26] musb-new: sunxi: Use CLK and RESET support Jagan Teki
2018-12-31 18:30 ` Marek Vasut
2018-12-31 16:59 ` [U-Boot] [PATCH v5 20/26] sunxi: usb: Switch to Generic host controllers Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 21/26] usb: host: Drop [e-o]hci-sunxi drivers Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 22/26] clk: sunxi: Implement SPI clocks Jagan Teki
2018-12-31 16:59 ` Jagan Teki [this message]
2018-12-31 16:59 ` [U-Boot] [PATCH v5 24/26] clk: sunxi: Implement A64 SPI clocks, resets Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 25/26] spi: Add Allwinner A31 SPI driver Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 26/26] board: sopine: Enable SPI/SPI-FLASH Jagan Teki
2019-01-07 13:04 ` Maxime Ripard
2019-01-22 16:32 ` Alexander Graf
2019-01-22 16:40 ` Andre Przywara
2019-01-22 16:47 ` Tom Rini
2019-01-06 9:39 ` [U-Boot] [PATCH v5 00/26] clk: Add Allwinner CLK, RESET support Jagan Teki
2019-01-06 13:17 ` André Przywara
2019-01-06 19:22 ` Jagan Teki
2019-01-07 1:21 ` André Przywara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181231165927.13803-24-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox