From: Jagan Teki <jagan@amarulasolutions.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v5 26/26] board: sopine: Enable SPI/SPI-FLASH
Date: Mon, 31 Dec 2018 22:29:27 +0530 [thread overview]
Message-ID: <20181231165927.13803-27-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20181231165927.13803-1-jagan@amarulasolutions.com>
Sopine has Winbond SPI flash, so enable the same to use
flash on Sopine board.
Cc: TL Lim <tllim@pine64.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
.../dts/sun50i-a64-sopine-baseboard-u-boot.dtsi | 16 ++++++++++++++++
configs/sopine_baseboard_defconfig | 7 +++++++
2 files changed, 23 insertions(+)
create mode 100644 arch/arm/dts/sun50i-a64-sopine-baseboard-u-boot.dtsi
diff --git a/arch/arm/dts/sun50i-a64-sopine-baseboard-u-boot.dtsi b/arch/arm/dts/sun50i-a64-sopine-baseboard-u-boot.dtsi
new file mode 100644
index 0000000000..9661b95d15
--- /dev/null
+++ b/arch/arm/dts/sun50i-a64-sopine-baseboard-u-boot.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+/ {
+ aliases {
+ spi0 = &spi0;
+ };
+};
+
+&spi0 {
+ flash at 0 {
+ compatible = "spi-flash";
+ };
+};
diff --git a/configs/sopine_baseboard_defconfig b/configs/sopine_baseboard_defconfig
index 0a189fc03d..5e6dc33d4d 100644
--- a/configs/sopine_baseboard_defconfig
+++ b/configs/sopine_baseboard_defconfig
@@ -12,9 +12,16 @@ CONFIG_SPL_SPI_SUNXI=y
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_SF=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-sopine-baseboard"
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_SUN6I_SPI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SUN8I_EMAC=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_EHCI_HCD=y
--
2.18.0.321.gffc6fa0e3
next prev parent reply other threads:[~2018-12-31 16:59 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-31 16:59 [U-Boot] [PATCH v5 00/26] clk: Add Allwinner CLK, RESET support Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 01/26] clk: Add Allwinner A64 CLK driver Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 02/26] reset: Add Allwinner RESET driver Jagan Teki
2019-01-10 0:50 ` André Przywara
2018-12-31 16:59 ` [U-Boot] [PATCH v5 03/26] clk: sunxi: Add Allwinner H3/H5 CLK driver Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 04/26] clk: sunxi: Add Allwinner A10/A20 " Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 05/26] clk: sunxi: Add Allwinner A10s/A13 " Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 06/26] clk: sunxi: Add Allwinner A31 " Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 07/26] clk: sunxi: Add Allwinner A23/A33 " Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 08/26] clk: sunxi: Add Allwinner A83T " Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 09/26] clk: sunxi: Add Allwinner R40 " Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 10/26] clk: sunxi: Add Allwinner V3S " Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 11/26] clk: sunxi: Implement UART clocks Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 12/26] clk: sunxi: Implement UART resets Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 13/26] clk: sunxi: Add Allwinner H6 CLK driver Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 14/26] sunxi: A64: Update sun50i-a64-ccu.h Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 15/26] clk: sunxi: Add ccu clock tree support Jagan Teki
2019-01-07 1:03 ` André Przywara
2019-01-07 13:01 ` Maxime Ripard
2019-01-07 14:09 ` Andre Przywara
2019-01-07 18:25 ` Maxime Ripard
2019-01-08 10:57 ` Jagan Teki
2019-01-08 11:39 ` Andre Przywara
2019-01-08 19:12 ` Jagan Teki
2019-01-10 0:50 ` André Przywara
2019-01-10 18:31 ` Jagan Teki
2019-01-08 11:25 ` Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 16/26] sunxi: Enable CLK Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 17/26] phy: sun4i-usb: Use CLK and RESET support Jagan Teki
2018-12-31 18:29 ` Marek Vasut
2018-12-31 18:38 ` Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 18/26] reset: Add reset valid Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 19/26] musb-new: sunxi: Use CLK and RESET support Jagan Teki
2018-12-31 18:30 ` Marek Vasut
2018-12-31 16:59 ` [U-Boot] [PATCH v5 20/26] sunxi: usb: Switch to Generic host controllers Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 21/26] usb: host: Drop [e-o]hci-sunxi drivers Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 22/26] clk: sunxi: Implement SPI clocks Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 23/26] spi: sun4i: Add CLK support Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 24/26] clk: sunxi: Implement A64 SPI clocks, resets Jagan Teki
2018-12-31 16:59 ` [U-Boot] [PATCH v5 25/26] spi: Add Allwinner A31 SPI driver Jagan Teki
2018-12-31 16:59 ` Jagan Teki [this message]
2019-01-07 13:04 ` [U-Boot] [PATCH v5 26/26] board: sopine: Enable SPI/SPI-FLASH Maxime Ripard
2019-01-22 16:32 ` Alexander Graf
2019-01-22 16:40 ` Andre Przywara
2019-01-22 16:47 ` Tom Rini
2019-01-06 9:39 ` [U-Boot] [PATCH v5 00/26] clk: Add Allwinner CLK, RESET support Jagan Teki
2019-01-06 13:17 ` André Przywara
2019-01-06 19:22 ` Jagan Teki
2019-01-07 1:21 ` André Przywara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181231165927.13803-27-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox