From: Manasi Navare <manasi.d.navare@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [CI v13 14/17] i915/dp/fec: Add fec_enable to the crtc state.
Date: Wed, 28 Nov 2018 12:26:25 -0800 [thread overview]
Message-ID: <20181128202628.20238-14-manasi.d.navare@intel.com> (raw)
In-Reply-To: <20181128202628.20238-1-manasi.d.navare@intel.com>
From: Anusha Srivatsa <anusha.srivatsa@intel.com>
For DP 1.4 and above, Display Stream compression can be
enabled only if Forward Error Correctin can be performed.
Add a crtc state for FEC. Currently, the state
is determined by platform, DP and DSC being
enabled. Moving forward we can use the state
to have error correction on other scenarios too
if needed.
v2:
- Control compression_enable with the fec_enable
parameter in crtc state and with intel_dp_supports_fec()
(Ville)
- intel_dp_can_fec()/intel_dp_supports_fec()(manasi)
v3: Check for FEC support along with setting crtc state.
v4: add checks to intel_dp_source_supports_dsc.(manasi)
- Move intel_dp_supports_fec() closer to
intel_dp_supports_dsc() (Anusha)
v5: Move fec check to intel_dp_supports_dsc(Ville)
v6: Remove warning. rebase.
v7: change crtc state to include DP sink and fec capability
of source.(Manasi)
v8: Set fec_enable in crtc in intel_dp_compute_config().
v9 (From Manasi):
* Combine the !edp and !fec_support check
* Derive dev_priv from intel_dp directly
v10 (From Manasi):
* Rebase
Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
---
drivers/gpu/drm/i915/intel_dp.c | 28 +++++++++++++++++++++++-----
drivers/gpu/drm/i915/intel_drv.h | 3 +++
2 files changed, 26 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 4e65dd1a6c07..38a6e82153fd 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -545,7 +545,7 @@ intel_dp_mode_valid(struct drm_connector *connector,
dsc_slice_count =
drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd,
true);
- } else {
+ } else if (drm_dp_sink_supports_fec(intel_dp->fec_capable)) {
dsc_max_output_bpp =
intel_dp_dsc_get_output_bpp(max_link_clock,
max_lanes,
@@ -1710,14 +1710,26 @@ struct link_config_limits {
int min_bpp, max_bpp;
};
-static bool intel_dp_source_supports_dsc(struct intel_dp *intel_dp,
+static bool intel_dp_source_supports_fec(struct intel_dp *intel_dp,
const struct intel_crtc_state *pipe_config)
{
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
- /* FIXME: FEC needed for external DP until then reject DSC on DP */
- if (!intel_dp_is_edp(intel_dp))
- return false;
+ return INTEL_GEN(dev_priv) >= 11 &&
+ pipe_config->cpu_transcoder != TRANSCODER_A;
+}
+
+static bool intel_dp_supports_fec(struct intel_dp *intel_dp,
+ const struct intel_crtc_state *pipe_config)
+{
+ return intel_dp_source_supports_fec(intel_dp, pipe_config) &&
+ drm_dp_sink_supports_fec(intel_dp->fec_capable);
+}
+
+static bool intel_dp_source_supports_dsc(struct intel_dp *intel_dp,
+ const struct intel_crtc_state *pipe_config)
+{
+ struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
return INTEL_GEN(dev_priv) >= 10 &&
pipe_config->cpu_transcoder != TRANSCODER_A;
@@ -1726,6 +1738,9 @@ static bool intel_dp_source_supports_dsc(struct intel_dp *intel_dp,
static bool intel_dp_supports_dsc(struct intel_dp *intel_dp,
const struct intel_crtc_state *pipe_config)
{
+ if (!intel_dp_is_edp(intel_dp) && !pipe_config->fec_enable)
+ return false;
+
return intel_dp_source_supports_dsc(intel_dp, pipe_config) &&
drm_dp_sink_supports_dsc(intel_dp->dsc_dpcd);
}
@@ -2129,6 +2144,9 @@ intel_dp_compute_config(struct intel_encoder *encoder,
if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK)
return false;
+ pipe_config->fec_enable = !intel_dp_is_edp(intel_dp) &&
+ intel_dp_supports_fec(intel_dp, pipe_config);
+
if (!intel_dp_compute_link_config(encoder, pipe_config, conn_state))
return false;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index b5693cac26d7..8c582d53c00a 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -946,6 +946,9 @@ struct intel_crtc_state {
u8 slice_count;
} dsc_params;
struct drm_dsc_config dp_dsc_cfg;
+
+ /* Forward Error correction State */
+ bool fec_enable;
};
struct intel_crtc {
--
2.19.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-11-28 20:23 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-28 20:26 [CI v13 01/17] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state Manasi Navare
2018-11-28 20:26 ` [CI v13 02/17] drm/i915/dp: Compute DSC pipe config in atomic check Manasi Navare
2018-11-28 21:36 ` [PATCH v14 " Manasi Navare
2018-11-28 20:26 ` [CI v13 03/17] drm/i915/dp: Do not enable PSR2 if DSC is enabled Manasi Navare
2018-11-28 20:26 ` [CI v13 04/17] drm/i915/dsc: Define & Compute VESA DSC params Manasi Navare
2018-11-29 19:38 ` [CI v15 " Manasi Navare
2018-11-28 20:26 ` [CI v13 05/17] drm/i915/dsc: Compute Rate Control parameters for DSC Manasi Navare
2018-11-28 20:26 ` [CI v13 06/17] drm/i915/dp: Enable/Disable DSC in DP Sink Manasi Navare
2018-11-28 20:26 ` [CI v13 07/17] drm/i915/dsc: Add a power domain for VDSC on eDP/MIPI DSI Manasi Navare
2018-11-28 20:26 ` [CI v13 08/17] drm/i915/dp: Configure i915 Picture parameter Set registers during DSC enabling Manasi Navare
2018-11-28 20:26 ` [CI v13 09/17] drm/i915/dp: Use the existing write_infoframe() for DSC PPS SDPs Manasi Navare
2018-11-28 20:26 ` [CI v13 10/17] drm/i915/dp: Populate DSC PPS SDP and send PPS infoframes Manasi Navare
2018-11-28 20:26 ` [CI v13 11/17] drm/i915/dp: Configure Display stream splitter registers during DSC enable Manasi Navare
2018-11-28 20:26 ` [CI v13 12/17] drm/i915/dp: Disable DSC in source by disabling DSS CTL bits Manasi Navare
2018-11-28 20:26 ` [CI v13 13/17] drm/i915/dsc: Enable and disable appropriate power wells for VDSC Manasi Navare
2018-11-28 20:26 ` Manasi Navare [this message]
2018-11-28 20:26 ` [CI v13 15/17] drm/i915/fec: Set FEC_READY in FEC_CONFIGURATION Manasi Navare
2018-11-28 20:26 ` [CI v13 16/17] i915/dp/fec: Configure the Forward Error Correction bits Manasi Navare
2018-11-28 20:26 ` [CI v13 17/17] drm/i915/fec: Disable FEC state Manasi Navare
2018-11-28 21:01 ` ✗ Fi.CI.BAT: failure for series starting with [CI,v13,01/17] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state Patchwork
2018-11-28 22:59 ` ✗ Fi.CI.CHECKPATCH: warning for series starting with [CI,v13,01/17] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state (rev2) Patchwork
2018-11-28 23:06 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-11-28 23:15 ` ✓ Fi.CI.BAT: success " Patchwork
2018-11-29 10:29 ` ✓ Fi.CI.IGT: " Patchwork
2018-11-29 19:50 ` ✗ Fi.CI.CHECKPATCH: warning for series starting with [CI,v13,01/17] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state (rev3) Patchwork
2018-11-29 19:56 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-11-29 20:08 ` ✓ Fi.CI.BAT: success " Patchwork
2018-11-29 20:52 ` [CI v13 01/17] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state Manasi Navare
2018-11-30 12:52 ` ✗ Fi.CI.IGT: failure for series starting with [CI,v13,01/17] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state (rev3) Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181128202628.20238-14-manasi.d.navare@intel.com \
--to=manasi.d.navare@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox