Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Manasi Navare <manasi.d.navare@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [CI v13 03/17] drm/i915/dp: Do not enable PSR2 if DSC is enabled
Date: Wed, 28 Nov 2018 12:26:14 -0800	[thread overview]
Message-ID: <20181128202628.20238-3-manasi.d.navare@intel.com> (raw)
In-Reply-To: <20181128202628.20238-1-manasi.d.navare@intel.com>

If a eDP panel supports both PSR2 and VDSC, our HW cannot
support both at a time. Give priority to PSR2 if a requested
resolution can be supported without compression else enable
VDSC and keep PSR2 disabled.

v4:
Fix the unrealted stuff removed during rebase (Ville)
v3:
* Rebase
v2:
* Add warning for DSC and PSR2 enabled together (DK)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
---
 drivers/gpu/drm/i915/intel_psr.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index 572e626eadff..2084784f320d 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -75,6 +75,10 @@ static bool intel_psr2_enabled(struct drm_i915_private *dev_priv,
 	if (i915_modparams.enable_psr == -1)
 		return false;
 
+	/* Cannot enable DSC and PSR2 simultaneously */
+	WARN_ON(crtc_state->dsc_params.compression_enable &&
+		crtc_state->has_psr2);
+
 	switch (dev_priv->psr.debug & I915_PSR_DEBUG_MODE_MASK) {
 	case I915_PSR_DEBUG_FORCE_PSR1:
 		return false;
@@ -502,6 +506,16 @@ static bool intel_psr2_config_valid(struct intel_dp *intel_dp,
 	if (!dev_priv->psr.sink_psr2_support)
 		return false;
 
+	/*
+	 * DSC and PSR2 cannot be enabled simultaneously. If a requested
+	 * resolution requires DSC to be enabled, priority is given to DSC
+	 * over PSR2.
+	 */
+	if (crtc_state->dsc_params.compression_enable) {
+		DRM_DEBUG_KMS("PSR2 cannot be enabled since DSC is enabled\n");
+		return false;
+	}
+
 	if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) {
 		psr_max_h = 4096;
 		psr_max_v = 2304;
-- 
2.19.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2018-11-28 20:23 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-28 20:26 [CI v13 01/17] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state Manasi Navare
2018-11-28 20:26 ` [CI v13 02/17] drm/i915/dp: Compute DSC pipe config in atomic check Manasi Navare
2018-11-28 21:36   ` [PATCH v14 " Manasi Navare
2018-11-28 20:26 ` Manasi Navare [this message]
2018-11-28 20:26 ` [CI v13 04/17] drm/i915/dsc: Define & Compute VESA DSC params Manasi Navare
2018-11-29 19:38   ` [CI v15 " Manasi Navare
2018-11-28 20:26 ` [CI v13 05/17] drm/i915/dsc: Compute Rate Control parameters for DSC Manasi Navare
2018-11-28 20:26 ` [CI v13 06/17] drm/i915/dp: Enable/Disable DSC in DP Sink Manasi Navare
2018-11-28 20:26 ` [CI v13 07/17] drm/i915/dsc: Add a power domain for VDSC on eDP/MIPI DSI Manasi Navare
2018-11-28 20:26 ` [CI v13 08/17] drm/i915/dp: Configure i915 Picture parameter Set registers during DSC enabling Manasi Navare
2018-11-28 20:26 ` [CI v13 09/17] drm/i915/dp: Use the existing write_infoframe() for DSC PPS SDPs Manasi Navare
2018-11-28 20:26 ` [CI v13 10/17] drm/i915/dp: Populate DSC PPS SDP and send PPS infoframes Manasi Navare
2018-11-28 20:26 ` [CI v13 11/17] drm/i915/dp: Configure Display stream splitter registers during DSC enable Manasi Navare
2018-11-28 20:26 ` [CI v13 12/17] drm/i915/dp: Disable DSC in source by disabling DSS CTL bits Manasi Navare
2018-11-28 20:26 ` [CI v13 13/17] drm/i915/dsc: Enable and disable appropriate power wells for VDSC Manasi Navare
2018-11-28 20:26 ` [CI v13 14/17] i915/dp/fec: Add fec_enable to the crtc state Manasi Navare
2018-11-28 20:26 ` [CI v13 15/17] drm/i915/fec: Set FEC_READY in FEC_CONFIGURATION Manasi Navare
2018-11-28 20:26 ` [CI v13 16/17] i915/dp/fec: Configure the Forward Error Correction bits Manasi Navare
2018-11-28 20:26 ` [CI v13 17/17] drm/i915/fec: Disable FEC state Manasi Navare
2018-11-28 21:01 ` ✗ Fi.CI.BAT: failure for series starting with [CI,v13,01/17] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state Patchwork
2018-11-28 22:59 ` ✗ Fi.CI.CHECKPATCH: warning for series starting with [CI,v13,01/17] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state (rev2) Patchwork
2018-11-28 23:06 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-11-28 23:15 ` ✓ Fi.CI.BAT: success " Patchwork
2018-11-29 10:29 ` ✓ Fi.CI.IGT: " Patchwork
2018-11-29 19:50 ` ✗ Fi.CI.CHECKPATCH: warning for series starting with [CI,v13,01/17] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state (rev3) Patchwork
2018-11-29 19:56 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-11-29 20:08 ` ✓ Fi.CI.BAT: success " Patchwork
2018-11-29 20:52 ` [CI v13 01/17] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state Manasi Navare
2018-11-30 12:52 ` ✗ Fi.CI.IGT: failure for series starting with [CI,v13,01/17] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state (rev3) Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181128202628.20238-3-manasi.d.navare@intel.com \
    --to=manasi.d.navare@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox