Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Matt Roper <matthew.d.roper@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH v3 10/48] drm/i915/xelpd: Support DP1.4 compression BPPs
Date: Fri,  7 May 2021 19:27:42 -0700	[thread overview]
Message-ID: <20210508022820.780227-11-matthew.d.roper@intel.com> (raw)
In-Reply-To: <20210508022820.780227-1-matthew.d.roper@intel.com>

From: Vandita Kulkarni <vandita.kulkarni@intel.com>

Support compression BPPs from bpc to uncompressed BPP -1.
So far we have 8,10,12 as valid compressed BPPS now the
support is extended.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
---
 drivers/gpu/drm/i915/display/intel_dp.c | 32 ++++++++++++++++++-------
 1 file changed, 24 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index f163a669f40f..8ccb3c3888f7 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -109,6 +109,7 @@ bool intel_dp_is_edp(struct intel_dp *intel_dp)
 }
 
 static void intel_dp_unset_edid(struct intel_dp *intel_dp);
+static int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8 dsc_max_bpc);
 
 /* update sink rates from dpcd */
 static void intel_dp_set_sink_rates(struct intel_dp *intel_dp)
@@ -494,7 +495,8 @@ small_joiner_ram_size_bits(struct drm_i915_private *i915)
 static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
 				       u32 link_clock, u32 lane_count,
 				       u32 mode_clock, u32 mode_hdisplay,
-				       bool bigjoiner)
+				       bool bigjoiner,
+				       u32 pipe_bpp)
 {
 	u32 bits_per_pixel, max_bpp_small_joiner_ram;
 	int i;
@@ -519,6 +521,7 @@ static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
 	drm_dbg_kms(&i915->drm, "Max small joiner bpp: %u\n",
 		    max_bpp_small_joiner_ram);
 
+
 	/*
 	 * Greatest allowed DSC BPP = MIN (output BPP from available Link BW
 	 * check, output bpp from small joiner RAM check)
@@ -541,12 +544,17 @@ static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
 		return 0;
 	}
 
-	/* Find the nearest match in the array of known BPPs from VESA */
-	for (i = 0; i < ARRAY_SIZE(valid_dsc_bpp) - 1; i++) {
-		if (bits_per_pixel < valid_dsc_bpp[i + 1])
-			break;
+	/* From XE_LPD onwards we support from bpc upto uncompressed bpp-1 BPPs */
+	if (DISPLAY_VER(i915) >= 13) {
+		bits_per_pixel = min(bits_per_pixel, pipe_bpp - 1);
+	} else {
+		/* Find the nearest match in the array of known BPPs from VESA */
+		for (i = 0; i < ARRAY_SIZE(valid_dsc_bpp) - 1; i++) {
+			if (bits_per_pixel < valid_dsc_bpp[i + 1])
+				break;
+		}
+		bits_per_pixel = valid_dsc_bpp[i];
 	}
-	bits_per_pixel = valid_dsc_bpp[i];
 
 	/*
 	 * Compressed BPP in U6.4 format so multiply by 16, for Gen 11,
@@ -780,6 +788,12 @@ intel_dp_mode_valid(struct drm_connector *connector,
 	 */
 	if (DISPLAY_VER(dev_priv) >= 10 &&
 	    drm_dp_sink_supports_dsc(intel_dp->dsc_dpcd)) {
+		/*
+		 * TBD pass the connector BPC,
+		 * for now U8_MAX so that max BPC on that platform would be picked
+		 */
+		int pipe_bpp = intel_dp_dsc_compute_bpp(intel_dp, U8_MAX);
+
 		if (intel_dp_is_edp(intel_dp)) {
 			dsc_max_output_bpp =
 				drm_edp_dsc_sink_output_bpp(intel_dp->dsc_dpcd) >> 4;
@@ -793,7 +807,8 @@ intel_dp_mode_valid(struct drm_connector *connector,
 							    max_lanes,
 							    target_clock,
 							    mode->hdisplay,
-							    bigjoiner) >> 4;
+							    bigjoiner,
+							    pipe_bpp) >> 4;
 			dsc_slice_count =
 				intel_dp_dsc_get_slice_count(intel_dp,
 							     target_clock,
@@ -1240,7 +1255,8 @@ static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
 						    pipe_config->lane_count,
 						    adjusted_mode->crtc_clock,
 						    adjusted_mode->crtc_hdisplay,
-						    pipe_config->bigjoiner);
+						    pipe_config->bigjoiner,
+						    pipe_bpp);
 		dsc_dp_slice_count =
 			intel_dp_dsc_get_slice_count(intel_dp,
 						     adjusted_mode->crtc_clock,
-- 
2.25.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2021-05-08  2:28 UTC|newest]

Thread overview: 76+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-08  2:27 [Intel-gfx] [PATCH v3 00/48] Alder Lake-P Support Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 01/48] drm/i915/xelpd: Handle proper AUX interrupt bits Matt Roper
2021-05-12 21:37   ` Lucas De Marchi
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 02/48] drm/i915/xelpd: Enhanced pipe underrun reporting Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 03/48] drm/i915/xelpd: Define plane capabilities Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 04/48] drm/i915/xelpd: Handle new location of outputs D and E Matt Roper
2021-05-14 13:52   ` Imre Deak
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 05/48] drm/i915/xelpd: Add XE_LPD power wells Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 06/48] drm/i915/xelpd: Increase maximum watermark lines to 255 Matt Roper
2021-05-12 17:56   ` Srivatsa, Anusha
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 07/48] drm/i915/xelpd: Required bandwidth increases when VT-d is active Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 08/48] drm/i915/xelpd: Add Wa_14011503030 Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 09/48] drm/i915/display/dsc: Refactor intel_dp_dsc_compute_bpp Matt Roper
2021-05-12 18:11   ` Srivatsa, Anusha
2021-05-08  2:27 ` Matt Roper [this message]
2021-05-13 19:18   ` [Intel-gfx] [PATCH v3 10/48] drm/i915/xelpd: Support DP1.4 compression BPPs Navare, Manasi
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 11/48] drm/i915: Get slice height before computing rc params Matt Roper
2021-05-13 19:20   ` Navare, Manasi
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 12/48] drm/i915/xelpd: Calculate VDSC RC parameters Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 13/48] drm/i915/xelpd: Add rc_qp_table for rcparams calculation Matt Roper
2021-05-08  2:52   ` [Intel-gfx] [PATCH v3.1 " Matt Roper
2021-05-12 22:28     ` Lucas De Marchi
2021-05-08  9:10   ` [Intel-gfx] [PATCH v3 " kernel test robot
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 14/48] drm/i915/xelpd: Add VRR guardband for VRR CTL Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 15/48] drm/i915/xelpd: Provide port/phy mapping for vbt Matt Roper
2021-05-12 19:21   ` Srivatsa, Anusha
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 16/48] drm/i915/adl_p: Add PCH support Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 17/48] drm/i915/adl_p: Add dedicated SAGV watermarks Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 18/48] drm/i915/adl_p: Extend PLANE_WM bits for blocks & lines Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 19/48] drm/i915/adl_p: Setup ports/phys Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 20/48] drm/i915/adl_p: Add cdclk support for ADL-P Matt Roper
2021-05-14  9:06   ` Kahola, Mika
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 21/48] drm/i915/display/tc: Rename safe_mode functions ownership Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 22/48] drm/i915/adl_p: Handle TC cold Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 23/48] drm/i915/adl_p: Implement TC sequences Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 24/48] drm/i915/adl_p: Enable modular fia Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 25/48] drm/i915/adl_p: Don't config MBUS and DBUF during display initialization Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 26/48] drm/i915/adl_p: Add ddb allocation support Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 27/48] drm/i915: Introduce MBUS relative dbuf offsets Matt Roper
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 28/48] drm/i915: Move intel_modeset_all_pipes() Matt Roper
2021-05-12 17:03   ` Srivatsa, Anusha
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 29/48] drm/i915/adl_p: MBUS programming Matt Roper
2021-05-14 10:09   ` Lisovskiy, Stanislav
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 30/48] drm/i915/adl_p: Tx escape clock with DSI Matt Roper
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 31/48] drm/i915/display: Replace dc3co_enabled with dc3co_exitline on intel_psr struct Matt Roper
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 32/48] drm/i915/display: Remove a redundant function argument from intel_psr_enable_source() Matt Roper
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 33/48] drm/i915/display: Add PSR interrupt error check function Matt Roper
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 34/48] drm/i915/display: Introduce new intel_psr_pause/resume function Matt Roper
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 35/48] drm/i915/adl_p: Define and use ADL-P specific DP translation tables Matt Roper
2021-05-12 19:49   ` Srivatsa, Anusha
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 36/48] drm/i915/adl_p: Enable/disable loadgen sharing Matt Roper
2021-05-12 23:07   ` Srivatsa, Anusha
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 37/48] drm/i915/adl_p: Add PLL Support Matt Roper
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 38/48] drm/i915/adl_p: Program DP/HDMI link rate to DDI_BUF_CTL Matt Roper
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 39/48] drm/i915/bigjoiner: Mode validation with uncompressed pipe joiner Matt Roper
2021-05-12 22:11   ` Srivatsa, Anusha
2021-05-13 19:09   ` Navare, Manasi
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 40/48] drm/i915/bigjoiner: Avoid dsc_compute_config for uncompressed bigjoiner Matt Roper
2021-05-13 19:12   ` Navare, Manasi
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 41/48] drm/i915/bigjoiner: atomic commit changes for uncompressed joiner Matt Roper
2021-05-13 19:17   ` Navare, Manasi
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 42/48] drm/i915/adlp: Add PIPE_MISC2 programming Matt Roper
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 43/48] drm/i915/adl_p: Update memory bandwidth parameters Matt Roper
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 44/48] drm/i915/adl_p: Add IPs stepping mapping Matt Roper
2021-05-12 22:35   ` Srivatsa, Anusha
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 45/48] drm/i915/adl_p: Implement Wa_22011091694 Matt Roper
2021-05-14  9:35   ` Kahola, Mika
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 46/48] drm/i915/display/adl_p: Implement Wa_22011320316 Matt Roper
2021-05-14 11:11   ` Kahola, Mika
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 47/48] drm/i915/adl_p: Disable CCS on a-step (Wa_22011186057) Matt Roper
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 48/48] drm/i915/perf: Enable OA formats for ADL_P Matt Roper
2021-05-08  2:48 ` [Intel-gfx] ✗ Fi.CI.BUILD: failure for Alder Lake-P Support Patchwork
2021-05-08  3:20 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Alder Lake-P Support (rev2) Patchwork
2021-05-08  3:21 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2021-05-08  3:50 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2021-05-08  5:03 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210508022820.780227-11-matthew.d.roper@intel.com \
    --to=matthew.d.roper@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox