From: "Navare, Manasi" <manasi.d.navare@intel.com>
To: Matt Roper <matthew.d.roper@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH v3 10/48] drm/i915/xelpd: Support DP1.4 compression BPPs
Date: Thu, 13 May 2021 12:18:52 -0700 [thread overview]
Message-ID: <20210513191852.GE23292@labuser-Z97X-UD5H> (raw)
In-Reply-To: <20210508022820.780227-11-matthew.d.roper@intel.com>
On Fri, May 07, 2021 at 07:27:42PM -0700, Matt Roper wrote:
> From: Vandita Kulkarni <vandita.kulkarni@intel.com>
>
> Support compression BPPs from bpc to uncompressed BPP -1.
> So far we have 8,10,12 as valid compressed BPPS now the
> support is extended.
>
> Cc: Manasi Navare <manasi.d.navare@intel.com>
> Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Manasi
> ---
> drivers/gpu/drm/i915/display/intel_dp.c | 32 ++++++++++++++++++-------
> 1 file changed, 24 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index f163a669f40f..8ccb3c3888f7 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -109,6 +109,7 @@ bool intel_dp_is_edp(struct intel_dp *intel_dp)
> }
>
> static void intel_dp_unset_edid(struct intel_dp *intel_dp);
> +static int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8 dsc_max_bpc);
>
> /* update sink rates from dpcd */
> static void intel_dp_set_sink_rates(struct intel_dp *intel_dp)
> @@ -494,7 +495,8 @@ small_joiner_ram_size_bits(struct drm_i915_private *i915)
> static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
> u32 link_clock, u32 lane_count,
> u32 mode_clock, u32 mode_hdisplay,
> - bool bigjoiner)
> + bool bigjoiner,
> + u32 pipe_bpp)
> {
> u32 bits_per_pixel, max_bpp_small_joiner_ram;
> int i;
> @@ -519,6 +521,7 @@ static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
> drm_dbg_kms(&i915->drm, "Max small joiner bpp: %u\n",
> max_bpp_small_joiner_ram);
>
> +
> /*
> * Greatest allowed DSC BPP = MIN (output BPP from available Link BW
> * check, output bpp from small joiner RAM check)
> @@ -541,12 +544,17 @@ static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
> return 0;
> }
>
> - /* Find the nearest match in the array of known BPPs from VESA */
> - for (i = 0; i < ARRAY_SIZE(valid_dsc_bpp) - 1; i++) {
> - if (bits_per_pixel < valid_dsc_bpp[i + 1])
> - break;
> + /* From XE_LPD onwards we support from bpc upto uncompressed bpp-1 BPPs */
> + if (DISPLAY_VER(i915) >= 13) {
> + bits_per_pixel = min(bits_per_pixel, pipe_bpp - 1);
> + } else {
> + /* Find the nearest match in the array of known BPPs from VESA */
> + for (i = 0; i < ARRAY_SIZE(valid_dsc_bpp) - 1; i++) {
> + if (bits_per_pixel < valid_dsc_bpp[i + 1])
> + break;
> + }
> + bits_per_pixel = valid_dsc_bpp[i];
> }
> - bits_per_pixel = valid_dsc_bpp[i];
>
> /*
> * Compressed BPP in U6.4 format so multiply by 16, for Gen 11,
> @@ -780,6 +788,12 @@ intel_dp_mode_valid(struct drm_connector *connector,
> */
> if (DISPLAY_VER(dev_priv) >= 10 &&
> drm_dp_sink_supports_dsc(intel_dp->dsc_dpcd)) {
> + /*
> + * TBD pass the connector BPC,
> + * for now U8_MAX so that max BPC on that platform would be picked
> + */
> + int pipe_bpp = intel_dp_dsc_compute_bpp(intel_dp, U8_MAX);
> +
> if (intel_dp_is_edp(intel_dp)) {
> dsc_max_output_bpp =
> drm_edp_dsc_sink_output_bpp(intel_dp->dsc_dpcd) >> 4;
> @@ -793,7 +807,8 @@ intel_dp_mode_valid(struct drm_connector *connector,
> max_lanes,
> target_clock,
> mode->hdisplay,
> - bigjoiner) >> 4;
> + bigjoiner,
> + pipe_bpp) >> 4;
> dsc_slice_count =
> intel_dp_dsc_get_slice_count(intel_dp,
> target_clock,
> @@ -1240,7 +1255,8 @@ static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
> pipe_config->lane_count,
> adjusted_mode->crtc_clock,
> adjusted_mode->crtc_hdisplay,
> - pipe_config->bigjoiner);
> + pipe_config->bigjoiner,
> + pipe_bpp);
> dsc_dp_slice_count =
> intel_dp_dsc_get_slice_count(intel_dp,
> adjusted_mode->crtc_clock,
> --
> 2.25.4
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2021-05-13 19:11 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-08 2:27 [Intel-gfx] [PATCH v3 00/48] Alder Lake-P Support Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 01/48] drm/i915/xelpd: Handle proper AUX interrupt bits Matt Roper
2021-05-12 21:37 ` Lucas De Marchi
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 02/48] drm/i915/xelpd: Enhanced pipe underrun reporting Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 03/48] drm/i915/xelpd: Define plane capabilities Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 04/48] drm/i915/xelpd: Handle new location of outputs D and E Matt Roper
2021-05-14 13:52 ` Imre Deak
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 05/48] drm/i915/xelpd: Add XE_LPD power wells Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 06/48] drm/i915/xelpd: Increase maximum watermark lines to 255 Matt Roper
2021-05-12 17:56 ` Srivatsa, Anusha
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 07/48] drm/i915/xelpd: Required bandwidth increases when VT-d is active Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 08/48] drm/i915/xelpd: Add Wa_14011503030 Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 09/48] drm/i915/display/dsc: Refactor intel_dp_dsc_compute_bpp Matt Roper
2021-05-12 18:11 ` Srivatsa, Anusha
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 10/48] drm/i915/xelpd: Support DP1.4 compression BPPs Matt Roper
2021-05-13 19:18 ` Navare, Manasi [this message]
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 11/48] drm/i915: Get slice height before computing rc params Matt Roper
2021-05-13 19:20 ` Navare, Manasi
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 12/48] drm/i915/xelpd: Calculate VDSC RC parameters Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 13/48] drm/i915/xelpd: Add rc_qp_table for rcparams calculation Matt Roper
2021-05-08 2:52 ` [Intel-gfx] [PATCH v3.1 " Matt Roper
2021-05-12 22:28 ` Lucas De Marchi
2021-05-08 9:10 ` [Intel-gfx] [PATCH v3 " kernel test robot
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 14/48] drm/i915/xelpd: Add VRR guardband for VRR CTL Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 15/48] drm/i915/xelpd: Provide port/phy mapping for vbt Matt Roper
2021-05-12 19:21 ` Srivatsa, Anusha
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 16/48] drm/i915/adl_p: Add PCH support Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 17/48] drm/i915/adl_p: Add dedicated SAGV watermarks Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 18/48] drm/i915/adl_p: Extend PLANE_WM bits for blocks & lines Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 19/48] drm/i915/adl_p: Setup ports/phys Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 20/48] drm/i915/adl_p: Add cdclk support for ADL-P Matt Roper
2021-05-14 9:06 ` Kahola, Mika
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 21/48] drm/i915/display/tc: Rename safe_mode functions ownership Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 22/48] drm/i915/adl_p: Handle TC cold Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 23/48] drm/i915/adl_p: Implement TC sequences Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 24/48] drm/i915/adl_p: Enable modular fia Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 25/48] drm/i915/adl_p: Don't config MBUS and DBUF during display initialization Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 26/48] drm/i915/adl_p: Add ddb allocation support Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 27/48] drm/i915: Introduce MBUS relative dbuf offsets Matt Roper
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 28/48] drm/i915: Move intel_modeset_all_pipes() Matt Roper
2021-05-12 17:03 ` Srivatsa, Anusha
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 29/48] drm/i915/adl_p: MBUS programming Matt Roper
2021-05-14 10:09 ` Lisovskiy, Stanislav
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 30/48] drm/i915/adl_p: Tx escape clock with DSI Matt Roper
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 31/48] drm/i915/display: Replace dc3co_enabled with dc3co_exitline on intel_psr struct Matt Roper
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 32/48] drm/i915/display: Remove a redundant function argument from intel_psr_enable_source() Matt Roper
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 33/48] drm/i915/display: Add PSR interrupt error check function Matt Roper
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 34/48] drm/i915/display: Introduce new intel_psr_pause/resume function Matt Roper
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 35/48] drm/i915/adl_p: Define and use ADL-P specific DP translation tables Matt Roper
2021-05-12 19:49 ` Srivatsa, Anusha
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 36/48] drm/i915/adl_p: Enable/disable loadgen sharing Matt Roper
2021-05-12 23:07 ` Srivatsa, Anusha
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 37/48] drm/i915/adl_p: Add PLL Support Matt Roper
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 38/48] drm/i915/adl_p: Program DP/HDMI link rate to DDI_BUF_CTL Matt Roper
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 39/48] drm/i915/bigjoiner: Mode validation with uncompressed pipe joiner Matt Roper
2021-05-12 22:11 ` Srivatsa, Anusha
2021-05-13 19:09 ` Navare, Manasi
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 40/48] drm/i915/bigjoiner: Avoid dsc_compute_config for uncompressed bigjoiner Matt Roper
2021-05-13 19:12 ` Navare, Manasi
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 41/48] drm/i915/bigjoiner: atomic commit changes for uncompressed joiner Matt Roper
2021-05-13 19:17 ` Navare, Manasi
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 42/48] drm/i915/adlp: Add PIPE_MISC2 programming Matt Roper
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 43/48] drm/i915/adl_p: Update memory bandwidth parameters Matt Roper
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 44/48] drm/i915/adl_p: Add IPs stepping mapping Matt Roper
2021-05-12 22:35 ` Srivatsa, Anusha
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 45/48] drm/i915/adl_p: Implement Wa_22011091694 Matt Roper
2021-05-14 9:35 ` Kahola, Mika
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 46/48] drm/i915/display/adl_p: Implement Wa_22011320316 Matt Roper
2021-05-14 11:11 ` Kahola, Mika
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 47/48] drm/i915/adl_p: Disable CCS on a-step (Wa_22011186057) Matt Roper
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 48/48] drm/i915/perf: Enable OA formats for ADL_P Matt Roper
2021-05-08 2:48 ` [Intel-gfx] ✗ Fi.CI.BUILD: failure for Alder Lake-P Support Patchwork
2021-05-08 3:20 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Alder Lake-P Support (rev2) Patchwork
2021-05-08 3:21 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2021-05-08 3:50 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2021-05-08 5:03 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210513191852.GE23292@labuser-Z97X-UD5H \
--to=manasi.d.navare@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=matthew.d.roper@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox