From: Matt Roper <matthew.d.roper@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH v3 17/48] drm/i915/adl_p: Add dedicated SAGV watermarks
Date: Fri, 7 May 2021 19:27:49 -0700 [thread overview]
Message-ID: <20210508022820.780227-18-matthew.d.roper@intel.com> (raw)
In-Reply-To: <20210508022820.780227-1-matthew.d.roper@intel.com>
XE_LPD reduces the number of regular watermark latency levels from 8
to 6 on non-dgfx platforms. However the hardware also adds a special
purpose SAGV wateramrk (and an accompanying transition watermark) that
will be used by the hardware in place of the level 0 values during SAGV
transitions.
Bspec: 49325, 49326, 50419
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
---
drivers/gpu/drm/i915/display/intel_display.c | 32 +++++++++++
drivers/gpu/drm/i915/i915_drv.h | 2 +
drivers/gpu/drm/i915/i915_reg.h | 59 ++++++++++++++------
drivers/gpu/drm/i915/intel_pm.c | 54 ++++++++++++++++--
4 files changed, 126 insertions(+), 21 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 494849963af5..330d6440a80e 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -8741,6 +8741,38 @@ static void verify_wm_state(struct intel_crtc *crtc,
hw_wm_level->lines);
}
+ hw_wm_level = &hw->wm.planes[plane->id].sagv.wm0;
+ sw_wm_level = &sw_wm->planes[plane->id].sagv.wm0;
+
+ if (HAS_HW_SAGV_WM(dev_priv) &&
+ !skl_wm_level_equals(hw_wm_level, sw_wm_level)) {
+ drm_err(&dev_priv->drm,
+ "[PLANE:%d:%s] mismatch in SAGV WM (expected e=%d b=%u l=%u, got e=%d b=%u l=%u)\n",
+ plane->base.base.id, plane->base.name,
+ sw_wm_level->enable,
+ sw_wm_level->blocks,
+ sw_wm_level->lines,
+ hw_wm_level->enable,
+ hw_wm_level->blocks,
+ hw_wm_level->lines);
+ }
+
+ hw_wm_level = &hw->wm.planes[plane->id].sagv.trans_wm;
+ sw_wm_level = &sw_wm->planes[plane->id].sagv.trans_wm;
+
+ if (HAS_HW_SAGV_WM(dev_priv) &&
+ !skl_wm_level_equals(hw_wm_level, sw_wm_level)) {
+ drm_err(&dev_priv->drm,
+ "[PLANE:%d:%s] mismatch in SAGV trans WM (expected e=%d b=%u l=%u, got e=%d b=%u l=%u)\n",
+ plane->base.base.id, plane->base.name,
+ sw_wm_level->enable,
+ sw_wm_level->blocks,
+ sw_wm_level->lines,
+ hw_wm_level->enable,
+ hw_wm_level->blocks,
+ hw_wm_level->lines);
+ }
+
/* DDB */
hw_ddb_entry = &hw->ddb_y[plane->id];
sw_ddb_entry = &new_crtc_state->wm.skl.plane_ddb_y[plane->id];
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 0d4f8771f596..3fe514c5de32 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -590,6 +590,8 @@ i915_fence_timeout(const struct drm_i915_private *i915)
/* Amount of SAGV/QGV points, BSpec precisely defines this */
#define I915_NUM_QGV_POINTS 8
+#define HAS_HW_SAGV_WM(i915) (DISPLAY_VER(i915) >= 13 && !IS_DGFX(i915))
+
struct ddi_vbt_port_info {
/* Non-NULL if port present. */
struct intel_bios_encoder_data *devdata;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 9bbbcdbd3c38..55924462a9a1 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6432,16 +6432,28 @@ enum {
/* Watermark register definitions for SKL */
#define _CUR_WM_A_0 0x70140
#define _CUR_WM_B_0 0x71140
+#define _CUR_WM_SAGV_A 0x70158
+#define _CUR_WM_SAGV_B 0x71158
+#define _CUR_WM_SAGV_TRANS_A 0x7015C
+#define _CUR_WM_SAGV_TRANS_B 0x7115C
+#define _CUR_WM_TRANS_A 0x70168
+#define _CUR_WM_TRANS_B 0x71168
#define _PLANE_WM_1_A_0 0x70240
#define _PLANE_WM_1_B_0 0x71240
#define _PLANE_WM_2_A_0 0x70340
#define _PLANE_WM_2_B_0 0x71340
-#define _PLANE_WM_TRANS_1_A_0 0x70268
-#define _PLANE_WM_TRANS_1_B_0 0x71268
-#define _PLANE_WM_TRANS_2_A_0 0x70368
-#define _PLANE_WM_TRANS_2_B_0 0x71368
-#define _CUR_WM_TRANS_A_0 0x70168
-#define _CUR_WM_TRANS_B_0 0x71168
+#define _PLANE_WM_SAGV_1_A 0x70258
+#define _PLANE_WM_SAGV_1_B 0x71258
+#define _PLANE_WM_SAGV_2_A 0x70358
+#define _PLANE_WM_SAGV_2_B 0x71358
+#define _PLANE_WM_SAGV_TRANS_1_A 0x7025C
+#define _PLANE_WM_SAGV_TRANS_1_B 0x7125C
+#define _PLANE_WM_SAGV_TRANS_2_A 0x7035C
+#define _PLANE_WM_SAGV_TRANS_2_B 0x7135C
+#define _PLANE_WM_TRANS_1_A 0x70268
+#define _PLANE_WM_TRANS_1_B 0x71268
+#define _PLANE_WM_TRANS_2_A 0x70368
+#define _PLANE_WM_TRANS_2_B 0x71368
#define PLANE_WM_EN (1 << 31)
#define PLANE_WM_IGNORE_LINES (1 << 30)
#define PLANE_WM_LINES_MASK REG_GENMASK(21, 14)
@@ -6449,19 +6461,32 @@ enum {
#define _CUR_WM_0(pipe) _PIPE(pipe, _CUR_WM_A_0, _CUR_WM_B_0)
#define CUR_WM(pipe, level) _MMIO(_CUR_WM_0(pipe) + ((4) * (level)))
-#define CUR_WM_TRANS(pipe) _MMIO_PIPE(pipe, _CUR_WM_TRANS_A_0, _CUR_WM_TRANS_B_0)
-
+#define CUR_WM_SAGV(pipe) _MMIO_PIPE(pipe, _CUR_WM_SAGV_A, _CUR_WM_SAGV_B)
+#define CUR_WM_SAGV_TRANS(pipe) _MMIO_PIPE(pipe, _CUR_WM_SAGV_TRANS_A, _CUR_WM_SAGV_TRANS_B)
+#define CUR_WM_TRANS(pipe) _MMIO_PIPE(pipe, _CUR_WM_TRANS_A, _CUR_WM_TRANS_B)
#define _PLANE_WM_1(pipe) _PIPE(pipe, _PLANE_WM_1_A_0, _PLANE_WM_1_B_0)
#define _PLANE_WM_2(pipe) _PIPE(pipe, _PLANE_WM_2_A_0, _PLANE_WM_2_B_0)
-#define _PLANE_WM_BASE(pipe, plane) \
- _PLANE(plane, _PLANE_WM_1(pipe), _PLANE_WM_2(pipe))
-#define PLANE_WM(pipe, plane, level) \
- _MMIO(_PLANE_WM_BASE(pipe, plane) + ((4) * (level)))
-#define _PLANE_WM_TRANS_1(pipe) \
- _PIPE(pipe, _PLANE_WM_TRANS_1_A_0, _PLANE_WM_TRANS_1_B_0)
-#define _PLANE_WM_TRANS_2(pipe) \
- _PIPE(pipe, _PLANE_WM_TRANS_2_A_0, _PLANE_WM_TRANS_2_B_0)
-#define PLANE_WM_TRANS(pipe, plane) \
+#define _PLANE_WM_BASE(pipe, plane) \
+ _PLANE(plane, _PLANE_WM_1(pipe), _PLANE_WM_2(pipe))
+#define PLANE_WM(pipe, plane, level) \
+ _MMIO(_PLANE_WM_BASE(pipe, plane) + ((4) * (level)))
+#define _PLANE_WM_SAGV_1(pipe) \
+ _PIPE(pipe, _PLANE_WM_SAGV_1_A, _PLANE_WM_SAGV_1_B)
+#define _PLANE_WM_SAGV_2(pipe) \
+ _PIPE(pipe, _PLANE_WM_SAGV_2_A, _PLANE_WM_SAGV_2_B)
+#define PLANE_WM_SAGV(pipe, plane) \
+ _MMIO(_PLANE(plane, _PLANE_WM_SAGV_1(pipe), _PLANE_WM_SAGV_2(pipe)))
+#define _PLANE_WM_SAGV_TRANS_1(pipe) \
+ _PIPE(pipe, _PLANE_WM_SAGV_TRANS_1_A, _PLANE_WM_SAGV_TRANS_1_B)
+#define _PLANE_WM_SAGV_TRANS_2(pipe) \
+ _PIPE(pipe, _PLANE_WM_SAGV_TRANS_2_A, _PLANE_WM_SAGV_TRANS_2_B)
+#define PLANE_WM_SAGV_TRANS(pipe, plane) \
+ _MMIO(_PLANE(plane, _PLANE_WM_SAGV_TRANS_1(pipe), _PLANE_WM_SAGV_TRANS_2(pipe)))
+#define _PLANE_WM_TRANS_1(pipe) \
+ _PIPE(pipe, _PLANE_WM_TRANS_1_A, _PLANE_WM_TRANS_1_B)
+#define _PLANE_WM_TRANS_2(pipe) \
+ _PIPE(pipe, _PLANE_WM_TRANS_2_A, _PLANE_WM_TRANS_2_B)
+#define PLANE_WM_TRANS(pipe, plane) \
_MMIO(_PLANE(plane, _PLANE_WM_TRANS_1(pipe), _PLANE_WM_TRANS_2(pipe)))
/* define the Watermark register on Ironlake */
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index ef2d1fa60f04..cac073f6f024 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -2983,7 +2983,9 @@ static void intel_fixup_cur_wm_latency(struct drm_i915_private *dev_priv,
int ilk_wm_max_level(const struct drm_i915_private *dev_priv)
{
/* how many WM levels are we expecting */
- if (DISPLAY_VER(dev_priv) >= 9)
+ if (HAS_HW_SAGV_WM(dev_priv))
+ return 5;
+ else if (DISPLAY_VER(dev_priv) >= 9)
return 7;
else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
return 4;
@@ -4011,8 +4013,9 @@ static int intel_compute_sagv_mask(struct intel_atomic_state *state)
* latter from the plane commit hooks (especially in the legacy
* cursor case)
*/
- pipe_wm->use_sagv_wm = DISPLAY_VER(dev_priv) >= 12 &&
- intel_can_enable_sagv(dev_priv, new_bw_state);
+ pipe_wm->use_sagv_wm = !HAS_HW_SAGV_WM(dev_priv) &&
+ DISPLAY_VER(dev_priv) >= 12 &&
+ intel_can_enable_sagv(dev_priv, new_bw_state);
}
if (intel_can_enable_sagv(dev_priv, new_bw_state) !=
@@ -5619,6 +5622,13 @@ void skl_write_plane_wm(struct intel_plane *plane,
skl_write_wm_level(dev_priv, PLANE_WM_TRANS(pipe, plane_id),
skl_plane_trans_wm(pipe_wm, plane_id));
+ if (HAS_HW_SAGV_WM(dev_priv)) {
+ skl_write_wm_level(dev_priv, PLANE_WM_SAGV(pipe, plane_id),
+ &wm->sagv.wm0);
+ skl_write_wm_level(dev_priv, PLANE_WM_SAGV_TRANS(pipe, plane_id),
+ &wm->sagv.trans_wm);
+ }
+
if (DISPLAY_VER(dev_priv) >= 11) {
skl_ddb_entry_write(dev_priv,
PLANE_BUF_CFG(pipe, plane_id), ddb_y);
@@ -5652,6 +5662,15 @@ void skl_write_cursor_wm(struct intel_plane *plane,
skl_write_wm_level(dev_priv, CUR_WM_TRANS(pipe),
skl_plane_trans_wm(pipe_wm, plane_id));
+ if (HAS_HW_SAGV_WM(dev_priv)) {
+ const struct skl_plane_wm *wm = &pipe_wm->planes[plane_id];
+
+ skl_write_wm_level(dev_priv, CUR_WM_SAGV(pipe),
+ &wm->sagv.wm0);
+ skl_write_wm_level(dev_priv, CUR_WM_SAGV_TRANS(pipe),
+ &wm->sagv.trans_wm);
+ }
+
skl_ddb_entry_write(dev_priv, CUR_BUF_CFG(pipe), ddb);
}
@@ -6016,6 +6035,15 @@ static bool skl_plane_selected_wm_equals(struct intel_plane *plane,
return false;
}
+ if (HAS_HW_SAGV_WM(i915)) {
+ const struct skl_plane_wm *old_wm = &old_pipe_wm->planes[plane->id];
+ const struct skl_plane_wm *new_wm = &new_pipe_wm->planes[plane->id];
+
+ if (!skl_wm_level_equals(&old_wm->sagv.wm0, &new_wm->sagv.wm0) ||
+ !skl_wm_level_equals(&old_wm->sagv.trans_wm, &new_wm->sagv.trans_wm))
+ return false;
+ }
+
return skl_wm_level_equals(skl_plane_trans_wm(old_pipe_wm, plane->id),
skl_plane_trans_wm(new_pipe_wm, plane->id));
}
@@ -6234,7 +6262,25 @@ void skl_pipe_wm_get_hw_state(struct intel_crtc *crtc,
skl_wm_level_from_reg_val(val, &wm->trans_wm);
- if (DISPLAY_VER(dev_priv) >= 12) {
+ if (HAS_HW_SAGV_WM(dev_priv)) {
+ if (plane_id != PLANE_CURSOR)
+ val = intel_uncore_read(&dev_priv->uncore,
+ PLANE_WM_SAGV(pipe, plane_id));
+ else
+ val = intel_uncore_read(&dev_priv->uncore,
+ CUR_WM_SAGV(pipe));
+
+ skl_wm_level_from_reg_val(val, &wm->sagv.wm0);
+
+ if (plane_id != PLANE_CURSOR)
+ val = intel_uncore_read(&dev_priv->uncore,
+ PLANE_WM_SAGV_TRANS(pipe, plane_id));
+ else
+ val = intel_uncore_read(&dev_priv->uncore,
+ CUR_WM_SAGV_TRANS(pipe));
+
+ skl_wm_level_from_reg_val(val, &wm->sagv.trans_wm);
+ } else if (DISPLAY_VER(dev_priv) >= 12) {
wm->sagv.wm0 = wm->wm[0];
wm->sagv.trans_wm = wm->trans_wm;
}
--
2.25.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2021-05-08 2:28 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-08 2:27 [Intel-gfx] [PATCH v3 00/48] Alder Lake-P Support Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 01/48] drm/i915/xelpd: Handle proper AUX interrupt bits Matt Roper
2021-05-12 21:37 ` Lucas De Marchi
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 02/48] drm/i915/xelpd: Enhanced pipe underrun reporting Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 03/48] drm/i915/xelpd: Define plane capabilities Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 04/48] drm/i915/xelpd: Handle new location of outputs D and E Matt Roper
2021-05-14 13:52 ` Imre Deak
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 05/48] drm/i915/xelpd: Add XE_LPD power wells Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 06/48] drm/i915/xelpd: Increase maximum watermark lines to 255 Matt Roper
2021-05-12 17:56 ` Srivatsa, Anusha
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 07/48] drm/i915/xelpd: Required bandwidth increases when VT-d is active Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 08/48] drm/i915/xelpd: Add Wa_14011503030 Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 09/48] drm/i915/display/dsc: Refactor intel_dp_dsc_compute_bpp Matt Roper
2021-05-12 18:11 ` Srivatsa, Anusha
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 10/48] drm/i915/xelpd: Support DP1.4 compression BPPs Matt Roper
2021-05-13 19:18 ` Navare, Manasi
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 11/48] drm/i915: Get slice height before computing rc params Matt Roper
2021-05-13 19:20 ` Navare, Manasi
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 12/48] drm/i915/xelpd: Calculate VDSC RC parameters Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 13/48] drm/i915/xelpd: Add rc_qp_table for rcparams calculation Matt Roper
2021-05-08 2:52 ` [Intel-gfx] [PATCH v3.1 " Matt Roper
2021-05-12 22:28 ` Lucas De Marchi
2021-05-08 9:10 ` [Intel-gfx] [PATCH v3 " kernel test robot
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 14/48] drm/i915/xelpd: Add VRR guardband for VRR CTL Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 15/48] drm/i915/xelpd: Provide port/phy mapping for vbt Matt Roper
2021-05-12 19:21 ` Srivatsa, Anusha
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 16/48] drm/i915/adl_p: Add PCH support Matt Roper
2021-05-08 2:27 ` Matt Roper [this message]
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 18/48] drm/i915/adl_p: Extend PLANE_WM bits for blocks & lines Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 19/48] drm/i915/adl_p: Setup ports/phys Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 20/48] drm/i915/adl_p: Add cdclk support for ADL-P Matt Roper
2021-05-14 9:06 ` Kahola, Mika
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 21/48] drm/i915/display/tc: Rename safe_mode functions ownership Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 22/48] drm/i915/adl_p: Handle TC cold Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 23/48] drm/i915/adl_p: Implement TC sequences Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 24/48] drm/i915/adl_p: Enable modular fia Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 25/48] drm/i915/adl_p: Don't config MBUS and DBUF during display initialization Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 26/48] drm/i915/adl_p: Add ddb allocation support Matt Roper
2021-05-08 2:27 ` [Intel-gfx] [PATCH v3 27/48] drm/i915: Introduce MBUS relative dbuf offsets Matt Roper
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 28/48] drm/i915: Move intel_modeset_all_pipes() Matt Roper
2021-05-12 17:03 ` Srivatsa, Anusha
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 29/48] drm/i915/adl_p: MBUS programming Matt Roper
2021-05-14 10:09 ` Lisovskiy, Stanislav
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 30/48] drm/i915/adl_p: Tx escape clock with DSI Matt Roper
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 31/48] drm/i915/display: Replace dc3co_enabled with dc3co_exitline on intel_psr struct Matt Roper
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 32/48] drm/i915/display: Remove a redundant function argument from intel_psr_enable_source() Matt Roper
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 33/48] drm/i915/display: Add PSR interrupt error check function Matt Roper
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 34/48] drm/i915/display: Introduce new intel_psr_pause/resume function Matt Roper
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 35/48] drm/i915/adl_p: Define and use ADL-P specific DP translation tables Matt Roper
2021-05-12 19:49 ` Srivatsa, Anusha
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 36/48] drm/i915/adl_p: Enable/disable loadgen sharing Matt Roper
2021-05-12 23:07 ` Srivatsa, Anusha
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 37/48] drm/i915/adl_p: Add PLL Support Matt Roper
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 38/48] drm/i915/adl_p: Program DP/HDMI link rate to DDI_BUF_CTL Matt Roper
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 39/48] drm/i915/bigjoiner: Mode validation with uncompressed pipe joiner Matt Roper
2021-05-12 22:11 ` Srivatsa, Anusha
2021-05-13 19:09 ` Navare, Manasi
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 40/48] drm/i915/bigjoiner: Avoid dsc_compute_config for uncompressed bigjoiner Matt Roper
2021-05-13 19:12 ` Navare, Manasi
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 41/48] drm/i915/bigjoiner: atomic commit changes for uncompressed joiner Matt Roper
2021-05-13 19:17 ` Navare, Manasi
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 42/48] drm/i915/adlp: Add PIPE_MISC2 programming Matt Roper
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 43/48] drm/i915/adl_p: Update memory bandwidth parameters Matt Roper
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 44/48] drm/i915/adl_p: Add IPs stepping mapping Matt Roper
2021-05-12 22:35 ` Srivatsa, Anusha
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 45/48] drm/i915/adl_p: Implement Wa_22011091694 Matt Roper
2021-05-14 9:35 ` Kahola, Mika
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 46/48] drm/i915/display/adl_p: Implement Wa_22011320316 Matt Roper
2021-05-14 11:11 ` Kahola, Mika
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 47/48] drm/i915/adl_p: Disable CCS on a-step (Wa_22011186057) Matt Roper
2021-05-08 2:28 ` [Intel-gfx] [PATCH v3 48/48] drm/i915/perf: Enable OA formats for ADL_P Matt Roper
2021-05-08 2:48 ` [Intel-gfx] ✗ Fi.CI.BUILD: failure for Alder Lake-P Support Patchwork
2021-05-08 3:20 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Alder Lake-P Support (rev2) Patchwork
2021-05-08 3:21 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2021-05-08 3:50 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2021-05-08 5:03 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210508022820.780227-18-matthew.d.roper@intel.com \
--to=matthew.d.roper@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox