From: Ville Syrjala <ville.syrjala@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH 05/15] drm/i915: Use REG_BIT() & co for the pre-ilk pfit registers
Date: Tue, 18 Apr 2023 20:55:18 +0300 [thread overview]
Message-ID: <20230418175528.13117-6-ville.syrjala@linux.intel.com> (raw)
In-Reply-To: <20230418175528.13117-1-ville.syrjala@linux.intel.com>
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
Modernize the gmch pfit register definitions using REG_BIT/etc.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
drivers/gpu/drm/i915/display/intel_display.c | 15 +++---
drivers/gpu/drm/i915/display/intel_overlay.c | 16 +++---
drivers/gpu/drm/i915/display/intel_panel.c | 8 +--
drivers/gpu/drm/i915/i915_reg.h | 54 ++++++++++----------
4 files changed, 48 insertions(+), 45 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index a450d62e431c..ea1b0e87ae35 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -2749,6 +2749,7 @@ static void i9xx_get_pfit_config(struct intel_crtc_state *crtc_state)
{
struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+ enum pipe pipe;
u32 tmp;
if (!i9xx_has_pfit(dev_priv))
@@ -2759,13 +2760,13 @@ static void i9xx_get_pfit_config(struct intel_crtc_state *crtc_state)
return;
/* Check whether the pfit is attached to our pipe. */
- if (DISPLAY_VER(dev_priv) < 4) {
- if (crtc->pipe != PIPE_B)
- return;
- } else {
- if ((tmp & PFIT_PIPE_MASK) != (crtc->pipe << PFIT_PIPE_SHIFT))
- return;
- }
+ if (DISPLAY_VER(dev_priv) >= 4)
+ pipe = REG_FIELD_GET(PFIT_PIPE_MASK, tmp);
+ else
+ pipe = PIPE_B;
+
+ if (pipe != crtc->pipe)
+ return;
crtc_state->gmch_pfit.control = tmp;
crtc_state->gmch_pfit.pgm_ratios =
diff --git a/drivers/gpu/drm/i915/display/intel_overlay.c b/drivers/gpu/drm/i915/display/intel_overlay.c
index c12bdca8da9b..1813ab5056a1 100644
--- a/drivers/gpu/drm/i915/display/intel_overlay.c
+++ b/drivers/gpu/drm/i915/display/intel_overlay.c
@@ -935,21 +935,25 @@ static int check_overlay_possible_on_crtc(struct intel_overlay *overlay,
static void update_pfit_vscale_ratio(struct intel_overlay *overlay)
{
struct drm_i915_private *dev_priv = overlay->i915;
- u32 pfit_control = intel_de_read(dev_priv, PFIT_CONTROL);
u32 ratio;
/* XXX: This is not the same logic as in the xorg driver, but more in
* line with the intel documentation for the i965
*/
if (DISPLAY_VER(dev_priv) >= 4) {
+ u32 tmp = intel_de_read(dev_priv, PFIT_PGM_RATIOS);
+
/* on i965 use the PGM reg to read out the autoscaler values */
- ratio = intel_de_read(dev_priv, PFIT_PGM_RATIOS) >> PFIT_VERT_SCALE_SHIFT_965;
+ ratio = REG_FIELD_GET(PFIT_VERT_SCALE_MASK_965, tmp);
} else {
- if (pfit_control & VERT_AUTO_SCALE)
- ratio = intel_de_read(dev_priv, PFIT_AUTO_RATIOS);
+ u32 tmp;
+
+ if (intel_de_read(dev_priv, PFIT_CONTROL) & VERT_AUTO_SCALE)
+ tmp = intel_de_read(dev_priv, PFIT_AUTO_RATIOS);
else
- ratio = intel_de_read(dev_priv, PFIT_PGM_RATIOS);
- ratio >>= PFIT_VERT_SCALE_SHIFT;
+ tmp = intel_de_read(dev_priv, PFIT_PGM_RATIOS);
+
+ ratio = REG_FIELD_GET(PFIT_VERT_SCALE_MASK, tmp);
}
overlay->pfit_vscale_ratio = ratio;
diff --git a/drivers/gpu/drm/i915/display/intel_panel.c b/drivers/gpu/drm/i915/display/intel_panel.c
index 9acdd68b2dbc..71cd08f44ed0 100644
--- a/drivers/gpu/drm/i915/display/intel_panel.c
+++ b/drivers/gpu/drm/i915/display/intel_panel.c
@@ -564,8 +564,8 @@ static void i9xx_scale_aspect(struct intel_crtc_state *crtc_state,
bits = panel_fitter_scaling(pipe_src_h,
adjusted_mode->crtc_vdisplay);
- *pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT |
- bits << PFIT_VERT_SCALE_SHIFT);
+ *pfit_pgm_ratios |= (PFIT_HORIZ_SCALE(bits) |
+ PFIT_VERT_SCALE(bits));
*pfit_control |= (PFIT_ENABLE |
VERT_INTERP_BILINEAR |
HORIZ_INTERP_BILINEAR);
@@ -579,8 +579,8 @@ static void i9xx_scale_aspect(struct intel_crtc_state *crtc_state,
bits = panel_fitter_scaling(pipe_src_w,
adjusted_mode->crtc_hdisplay);
- *pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT |
- bits << PFIT_VERT_SCALE_SHIFT);
+ *pfit_pgm_ratios |= (PFIT_HORIZ_SCALE(bits) |
+ PFIT_VERT_SCALE(bits));
*pfit_control |= (PFIT_ENABLE |
VERT_INTERP_BILINEAR |
HORIZ_INTERP_BILINEAR);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index f472baf242dc..cb8611aaaa5e 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2337,35 +2337,33 @@
/* Panel fitting */
#define PFIT_CONTROL _MMIO(DISPLAY_MMIO_BASE(dev_priv) + 0x61230)
-#define PFIT_ENABLE (1 << 31)
-#define PFIT_PIPE_MASK (3 << 29)
-#define PFIT_PIPE_SHIFT 29
-#define PFIT_PIPE(pipe) ((pipe) << 29)
-#define VERT_INTERP_DISABLE (0 << 10)
-#define VERT_INTERP_BILINEAR (1 << 10)
-#define VERT_INTERP_MASK (3 << 10)
-#define VERT_AUTO_SCALE (1 << 9)
-#define HORIZ_INTERP_DISABLE (0 << 6)
-#define HORIZ_INTERP_BILINEAR (1 << 6)
-#define HORIZ_INTERP_MASK (3 << 6)
-#define HORIZ_AUTO_SCALE (1 << 5)
-#define PANEL_8TO6_DITHER_ENABLE (1 << 3)
-#define PFIT_FILTER_FUZZY (0 << 24)
-#define PFIT_SCALING_AUTO (0 << 26)
-#define PFIT_SCALING_PROGRAMMED (1 << 26)
-#define PFIT_SCALING_PILLAR (2 << 26)
-#define PFIT_SCALING_LETTER (3 << 26)
+#define PFIT_ENABLE REG_BIT(31)
+#define PFIT_PIPE_MASK REG_GENMASK(30, 29) /* 965+ */
+#define PFIT_PIPE(pipe) REG_FIELD_PREP(PFIT_PIPE_MASK, (pipe))
+#define PFIT_SCALING_MASK REG_GENMASK(28, 26) /* 965+ */
+#define PFIT_SCALING_AUTO REG_FIELD_PREP(PFIT_SCALING_MASK, 0)
+#define PFIT_SCALING_PROGRAMMED REG_FIELD_PREP(PFIT_SCALING_MASK, 1)
+#define PFIT_SCALING_PILLAR REG_FIELD_PREP(PFIT_SCALING_MASK, 2)
+#define PFIT_SCALING_LETTER REG_FIELD_PREP(PFIT_SCALING_MASK, 3)
+#define PFIT_FILTER_MASK REG_GENMASK(25, 24) /* 965+ */
+#define PFIT_FILTER_FUZZY REG_FIELD_PREP(PFIT_FILTER_MASK, 0)
+#define PFIT_FILTER_CRISP REG_FIELD_PREP(PFIT_FILTER_MASK, 1)
+#define PFIT_FILTER_MEDIAN REG_FIELD_PREP(PFIT_FILTER_MASK, 2)
+#define VERT_INTERP_MASK REG_GENMASK(11, 10) /* pre-965 */
+#define VERT_INTERP_BILINEAR REG_FIELD_PREP(VERT_INTERP_MASK, 1)
+#define VERT_AUTO_SCALE REG_BIT(9) /* pre-965 */
+#define HORIZ_INTERP_MASK REG_GENMASK(7, 6) /* pre-965 */
+#define HORIZ_INTERP_BILINEAR REG_FIELD_PREP(HORIZ_INTERP_MASK, 1)
+#define HORIZ_AUTO_SCALE REG_BIT(5) /* pre-965 */
+#define PANEL_8TO6_DITHER_ENABLE REG_BIT(3) /* pre-965 */
+
#define PFIT_PGM_RATIOS _MMIO(DISPLAY_MMIO_BASE(dev_priv) + 0x61234)
-/* Pre-965 */
-#define PFIT_VERT_SCALE_SHIFT 20
-#define PFIT_VERT_SCALE_MASK 0xfff00000
-#define PFIT_HORIZ_SCALE_SHIFT 4
-#define PFIT_HORIZ_SCALE_MASK 0x0000fff0
-/* 965+ */
-#define PFIT_VERT_SCALE_SHIFT_965 16
-#define PFIT_VERT_SCALE_MASK_965 0x1fff0000
-#define PFIT_HORIZ_SCALE_SHIFT_965 0
-#define PFIT_HORIZ_SCALE_MASK_965 0x00001fff
+#define PFIT_VERT_SCALE_MASK REG_GENMASK(31, 20) /* pre-965 */
+#define PFIT_VERT_SCALE(x) REG_FIELD_PREP(PFIT_VERT_SCALE_MASK, (x))
+#define PFIT_HORIZ_SCALE_MASK REG_GENMASK(15, 4) /* pre-965 */
+#define PFIT_HORIZ_SCALE(x) REG_FIELD_PREP(PFIT_HORIZ_SCALE_MASK, (x))
+#define PFIT_VERT_SCALE_MASK_965 REG_GENMASK(28, 16) /* 965+ */
+#define PFIT_HORIZ_SCALE_MASK_965 REG_GENMASK(12, 0) /* 965+ */
#define PFIT_AUTO_RATIOS _MMIO(DISPLAY_MMIO_BASE(dev_priv) + 0x61238)
--
2.39.2
next prev parent reply other threads:[~2023-04-18 17:56 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-18 17:55 [Intel-gfx] [PATCH 00/15] drm/i915: Scaler/pfit stuff Ville Syrjala
2023-04-18 17:55 ` [Intel-gfx] [PATCH 01/15] drm/i915: Check pipe source size when using skl+ scalers Ville Syrjala
2023-04-19 15:11 ` Jani Nikula
2023-04-18 17:55 ` [Intel-gfx] [PATCH 02/15] drm/i915: Relocate VBLANK_EVASION_TIME_US Ville Syrjala
2023-04-19 15:13 ` Jani Nikula
2023-04-18 17:55 ` [Intel-gfx] [PATCH 03/15] drm/i915: Relocate intel_atomic_setup_scalers() Ville Syrjala
2023-04-19 15:16 ` Jani Nikula
2023-04-18 17:55 ` [Intel-gfx] [PATCH 04/15] drm/i915: Relocate skl_get_pfit_config() Ville Syrjala
2023-04-19 15:17 ` Jani Nikula
2023-04-18 17:55 ` Ville Syrjala [this message]
2023-04-19 15:28 ` [Intel-gfx] [PATCH 05/15] drm/i915: Use REG_BIT() & co for the pre-ilk pfit registers Jani Nikula
2023-04-18 17:55 ` [Intel-gfx] [PATCH 06/15] drm/i915: Namespace pfit registers properly Ville Syrjala
2023-04-19 15:28 ` Jani Nikula
2023-04-18 17:55 ` [Intel-gfx] [PATCH 07/15] drm/i915: Use REG_BIT() & co. for ilk+ pfit registers Ville Syrjala
2023-04-19 15:29 ` Jani Nikula
2023-04-18 17:55 ` [Intel-gfx] [PATCH 08/15] drm/i915: Drop a useless forward declararion Ville Syrjala
2023-04-19 15:30 ` Jani Nikula
2023-04-18 17:55 ` [Intel-gfx] [PATCH 09/15] drm/i915: Define bitmasks for ilk pfit window pos/size Ville Syrjala
2023-04-19 15:34 ` Jani Nikula
2023-04-20 12:09 ` Ville Syrjälä
2023-04-25 10:49 ` Ville Syrjälä
2023-04-18 17:55 ` [Intel-gfx] [PATCH 10/15] drm/i915: Remove dead scaler register defines Ville Syrjala
2023-04-19 15:35 ` Jani Nikula
2023-04-18 17:55 ` [Intel-gfx] [PATCH 11/15] drm/i915: Rename skl+ scaler binding bits Ville Syrjala
2023-04-18 19:36 ` [Intel-gfx] [PATCH v2 " Ville Syrjala
2023-04-19 15:38 ` Jani Nikula
2023-04-18 22:06 ` [Intel-gfx] [PATCH " kernel test robot
2023-04-19 15:38 ` Jani Nikula
2023-04-18 17:55 ` [Intel-gfx] [PATCH 12/15] drm/i915: s/PS_COEE_INDEX_AUTO_INC/PS_COEF_INDEX_AUTO_INC/ Ville Syrjala
2023-04-19 15:38 ` Jani Nikula
2023-04-18 17:55 ` [Intel-gfx] [PATCH 13/15] drm/i915: Define bitmasks for sik+ scaler window pos/size Ville Syrjala
2023-04-19 15:41 ` Jani Nikula
2023-04-18 17:55 ` [Intel-gfx] [PATCH 14/15] drm/i915: Use REG_BIT() & co. for pipe scaler registers Ville Syrjala
2023-04-19 15:48 ` Jani Nikula
2023-04-18 17:55 ` [Intel-gfx] [PATCH 15/15] drm/i915: Define more PS_CTRL bits Ville Syrjala
2023-04-18 18:31 ` [Intel-gfx] ✗ Fi.CI.BUILD: failure for drm/i915: Scaler/pfit stuff Patchwork
2023-04-18 22:20 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Scaler/pfit stuff (rev2) Patchwork
2023-04-18 22:20 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2023-04-18 22:30 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2023-04-19 4:12 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230418175528.13117-6-ville.syrjala@linux.intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox