From: Ville Syrjala <ville.syrjala@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH v2 05/19] drm/i915/dsb: Define the contents of some intstructions bit better
Date: Tue, 6 Jun 2023 22:14:50 +0300 [thread overview]
Message-ID: <20230606191504.18099-6-ville.syrjala@linux.intel.com> (raw)
In-Reply-To: <20230606191504.18099-1-ville.syrjala@linux.intel.com>
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
Add some defines to specify what goes inside certain DSB
instructions.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
drivers/gpu/drm/i915/display/intel_dsb.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dsb.c b/drivers/gpu/drm/i915/display/intel_dsb.c
index 42911abcd3ab..093b2567883d 100644
--- a/drivers/gpu/drm/i915/display/intel_dsb.c
+++ b/drivers/gpu/drm/i915/display/intel_dsb.c
@@ -70,17 +70,21 @@ struct intel_dsb {
#define DSB_OPCODE_SHIFT 24
#define DSB_OPCODE_NOOP 0x0
#define DSB_OPCODE_MMIO_WRITE 0x1
+#define DSB_BYTE_EN 0xf
+#define DSB_BYTE_EN_SHIFT 20
+#define DSB_REG_VALUE_MASK 0xfffff
#define DSB_OPCODE_WAIT_USEC 0x2
-#define DSB_OPCODE_WAIT_LINES 0x3
+#define DSB_OPCODE_WAIT_SCANLINE 0x3
#define DSB_OPCODE_WAIT_VBLANKS 0x4
#define DSB_OPCODE_WAIT_DSL_IN 0x5
#define DSB_OPCODE_WAIT_DSL_OUT 0x6
+#define DSB_SCANLINE_UPPER_SHIFT 20
+#define DSB_SCANLINE_LOWER_SHIFT 0
#define DSB_OPCODE_INTERRUPT 0x7
#define DSB_OPCODE_INDEXED_WRITE 0x9
+/* see DSB_REG_VALUE_MASK */
#define DSB_OPCODE_POLL 0xA
-#define DSB_BYTE_EN 0xF
-#define DSB_BYTE_EN_SHIFT 20
-#define DSB_REG_VALUE_MASK 0xfffff
+/* see DSB_REG_VALUE_MASK */
static bool assert_dsb_has_room(struct intel_dsb *dsb)
{
--
2.39.3
next prev parent reply other threads:[~2023-06-06 19:15 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-06 19:14 [Intel-gfx] [PATCH v2 00/19] drm/i915: Load LUTs with DSB Ville Syrjala
2023-06-06 19:14 ` [Intel-gfx] [PATCH v2 01/19] drm/i915: Constify LUT entries in checker Ville Syrjala
2023-07-05 9:43 ` Manna, Animesh
2023-06-06 19:14 ` [Intel-gfx] [PATCH v2 02/19] drm/i915/dsb: Use non-locked register access Ville Syrjala
2023-06-08 11:46 ` Jani Nikula
2023-09-11 20:22 ` Shankar, Uma
2023-09-12 7:37 ` Jani Nikula
2023-09-12 7:49 ` Shankar, Uma
2023-06-06 19:14 ` [Intel-gfx] [PATCH v2 03/19] drm/i915/dsb: Dump the DSB command buffer when DSB fails Ville Syrjala
2023-07-11 4:55 ` Manna, Animesh
2023-06-06 19:14 ` [Intel-gfx] [PATCH v2 04/19] drm/i915/dsb: Define more DSB bits Ville Syrjala
2023-09-11 20:32 ` Shankar, Uma
2023-06-06 19:14 ` Ville Syrjala [this message]
2023-09-11 20:50 ` [Intel-gfx] [PATCH v2 05/19] drm/i915/dsb: Define the contents of some intstructions bit better Shankar, Uma
2023-09-27 15:38 ` Ville Syrjälä
2023-09-27 16:16 ` Shankar, Uma
2023-06-06 19:14 ` [Intel-gfx] [PATCH v2 06/19] drm/i915/dsb: Avoid corrupting the first register write Ville Syrjala
2023-07-05 9:39 ` Manna, Animesh
2023-07-05 9:46 ` Manna, Animesh
2023-06-06 19:14 ` [Intel-gfx] [PATCH v2 07/19] drm/i915/dsb: Don't use indexed writes when byte enables are not all set Ville Syrjala
2023-07-11 5:00 ` Manna, Animesh
2023-06-06 19:14 ` [Intel-gfx] [PATCH v2 08/19] drm/i915/dsb: Introduce intel_dsb_noop() Ville Syrjala
2023-09-11 20:52 ` Shankar, Uma
2023-06-06 19:14 ` [Intel-gfx] [PATCH v2 09/19] drm/i915/dsb: Introduce intel_dsb_reg_write_masked() Ville Syrjala
2023-09-11 20:55 ` Shankar, Uma
2023-06-06 19:14 ` [Intel-gfx] [PATCH v2 10/19] drm/i915/dsb: Add support for non-posted DSB registers writes Ville Syrjala
2023-07-11 5:43 ` Manna, Animesh
2023-09-11 21:04 ` Shankar, Uma
2023-06-06 19:14 ` [Intel-gfx] [PATCH v2 11/19] drm/i915/dsb: Don't use DSB to load the LUTs during full modeset Ville Syrjala
2023-09-11 21:09 ` Shankar, Uma
2023-06-06 19:14 ` [Intel-gfx] [PATCH v2 12/19] drm/i915/dsb: Load LUTs using the DSB during vblank Ville Syrjala
2023-09-13 16:24 ` Shankar, Uma
2023-06-06 19:14 ` [Intel-gfx] [PATCH v2 13/19] drm/i915/dsb: Use non-posted register writes for legacy LUT Ville Syrjala
2023-09-13 17:02 ` Shankar, Uma
2023-06-06 19:14 ` [Intel-gfx] [PATCH v2 14/19] drm/i915/dsb: Evade transcoder undelayed vblank when using DSB Ville Syrjala
2023-09-13 17:13 ` Shankar, Uma
2023-06-06 19:15 ` [Intel-gfx] [PATCH v2 15/19] drm/i915: Introduce skl_watermark_max_latency() Ville Syrjala
2023-09-13 17:25 ` Shankar, Uma
2023-06-06 19:15 ` [Intel-gfx] [PATCH v2 16/19] drm/i915: Introudce intel_crtc_scanline_to_hw() Ville Syrjala
2023-09-13 17:37 ` Shankar, Uma
2023-06-06 19:15 ` [Intel-gfx] [PATCH v2 17/19] drm/i915/dsb: Use DEwake to combat PkgC latency Ville Syrjala
2023-09-13 18:08 ` Shankar, Uma
2023-09-27 15:51 ` Ville Syrjälä
2023-09-27 16:11 ` Shankar, Uma
2023-06-06 19:15 ` [Intel-gfx] [PATCH v2 18/19] drm/i915/dsb: Re-instate DSB for LUT updates Ville Syrjala
2023-09-13 18:09 ` Shankar, Uma
2025-01-13 19:26 ` Ed Maste
2025-01-17 14:51 ` Ville Syrjälä
2023-06-06 19:15 ` [Intel-gfx] [PATCH v2 19/19] drm/i915: Do state check for color management changes Ville Syrjala
2023-06-06 22:34 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Load LUTs with DSB (rev2) Patchwork
2023-06-06 22:34 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2023-06-06 22:48 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2023-06-07 14:02 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2023-09-27 16:05 ` [Intel-gfx] [PATCH v2 00/19] drm/i915: Load LUTs with DSB Ville Syrjälä
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230606191504.18099-6-ville.syrjala@linux.intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox