Re: [PATCH v3 RESEND 3/5] arm64: dts: qcom: Add device tree for Nord SA8797P SoC

[Pavan Kondeti <pavan.kondeti@oss.qualcomm.com>]

On Tue, May 26, 2026 at 01:12:58PM +0800, Shawn Guo wrote:
> diff --git a/arch/arm64/boot/dts/qcom/scmi-common.dtsi b/arch/arm64/boot/dts/qcom/scmi-common.dtsi
> new file mode 100644
> index 000000000000..0c7ffe9e415c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/scmi-common.dtsi
> @@ -0,0 +1,1918 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +&firmware {
> +	scmi0: scmi-0 {
> +		compatible = "qcom,scmi-smc";
> +		arm,smc-id = <0xc6008012>;
> +		shmem = <&shmem0>;
> +		interrupts = <GIC_SPI 963 IRQ_TYPE_EDGE_RISING>;
> +		interrupt-names = "a2p";

I believe this interrupt source is GearVM firmware via Gunyah's
doorbell, correct? How do we know that scmi0 instance's interrupt 
is GIC_SPI#963? Are these assumed to be constant/fixed through out
the life time of this SoC?

> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		arm,max-msg = <10>;
> +		arm,max-msg-size = <256>;
> +		arm,max-rx-timeout-ms = <3000>;
> +
> +		status = "disabled";
> +
> +		scmi0_pd: protocol@11 {
> +			reg = <0x11>;
> +			#power-domain-cells = <1>;
> +		};
> +
> +		scmi0_dvfs: protocol@13 {
> +			reg = <0x13>;
> +			#power-domain-cells = <1>;
> +		};
> +
> +		scmi0_rst: protocol@16 {
> +			reg = <0x16>;
> +			#reset-cells = <1>;
> +		};
> +	};
> +