From: Francesco Lavra <flavra@baylibre.com>
To: "Lorenzo Bianconi" <lorenzo@kernel.org>,
"Jonathan Cameron" <jic23@kernel.org>,
"David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andy@kernel.org>,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 8/9] iio: imu: st_lsm6dsx: add event configurability on a per axis basis
Date: Thu, 30 Oct 2025 08:27:51 +0100 [thread overview]
Message-ID: <20251030072752.349633-9-flavra@baylibre.com> (raw)
In-Reply-To: <20251030072752.349633-1-flavra@baylibre.com>
In order to be able to configure event detection on a per axis
basis (for either setting an event threshold/sensitivity value, or
enabling/disabling event detection), add new axis-specific fields
to struct st_lsm6dsx_event_src, and modify the logic that handles
event configuration to properly handle axis-specific settings when
supported by a given event source.
A future commit will add actual event sources with per-axis
configurability.
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
---
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 7 ++
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 77 ++++++++++++++++----
2 files changed, 70 insertions(+), 14 deletions(-)
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index 0e0642ca1b6f..62edd177c87c 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -228,7 +228,14 @@ enum st_lsm6dsx_event_id {
struct st_lsm6dsx_event_src {
struct st_lsm6dsx_reg value;
+ struct st_lsm6dsx_reg x_value;
+ struct st_lsm6dsx_reg y_value;
+ struct st_lsm6dsx_reg z_value;
u8 enable_mask;
+ u8 enable_axis_reg;
+ u8 enable_x_mask;
+ u8 enable_y_mask;
+ u8 enable_z_mask;
u8 status_reg;
u8 status_mask;
u8 status_x_mask;
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index 87d40e70ca26..6d1b7b2a371a 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -1802,10 +1802,38 @@ static int st_lsm6dsx_event_setup(struct st_lsm6dsx_hw *hw, enum st_lsm6dsx_even
u8 enable_mask;
unsigned int data;
int err;
+ u8 old_enable, new_enable;
if (!hw->irq_routing)
return -ENOTSUPP;
+ if (src->enable_axis_reg) {
+ switch (axis) {
+ case IIO_MOD_X:
+ enable_mask = src->enable_x_mask;
+ break;
+ case IIO_MOD_Y:
+ enable_mask = src->enable_y_mask;
+ break;
+ case IIO_MOD_Z:
+ enable_mask = src->enable_z_mask;
+ break;
+ default:
+ enable_mask = 0;
+ }
+ if (enable_mask) {
+ data = ST_LSM6DSX_SHIFT_VAL(state, enable_mask);
+ err = st_lsm6dsx_update_bits_locked(hw, src->enable_axis_reg,
+ enable_mask, data);
+ if (err < 0)
+ return err;
+ }
+ }
+ old_enable = hw->enable_event[event];
+ new_enable = state ? (old_enable | BIT(axis)) : (old_enable & ~BIT(axis));
+ if (!!old_enable == !!new_enable)
+ return 0;
+
/* Enable/disable event interrupt */
enable_mask = src->enable_mask;
data = ST_LSM6DSX_SHIFT_VAL(state, enable_mask);
@@ -1823,6 +1851,31 @@ static enum st_lsm6dsx_event_id st_lsm6dsx_get_event_id(enum iio_event_type type
}
}
+static const struct st_lsm6dsx_reg *st_lsm6dsx_get_event_reg(struct st_lsm6dsx_hw *hw,
+ enum st_lsm6dsx_event_id event,
+ const struct iio_chan_spec *chan)
+{
+ const struct st_lsm6dsx_event_src *src = &hw->settings->event_settings.sources[event];
+ const struct st_lsm6dsx_reg *reg;
+
+ switch (chan->channel2) {
+ case IIO_MOD_X:
+ reg = &src->x_value;
+ break;
+ case IIO_MOD_Y:
+ reg = &src->y_value;
+ break;
+ case IIO_MOD_Z:
+ reg = &src->z_value;
+ break;
+ default:
+ return NULL;
+ }
+ if (!reg->addr)
+ reg = &src->value;
+ return reg;
+}
+
static int st_lsm6dsx_read_event(struct iio_dev *iio_dev,
const struct iio_chan_spec *chan,
enum iio_event_type type,
@@ -1840,7 +1893,10 @@ static int st_lsm6dsx_read_event(struct iio_dev *iio_dev,
if (event == ST_LSM6DSX_EVENT_MAX)
return -EINVAL;
- reg = &hw->settings->event_settings.sources[event].value;
+ reg = st_lsm6dsx_get_event_reg(hw, event, chan);
+ if (!reg)
+ return -EINVAL;
+
err = st_lsm6dsx_read_locked(hw, reg->addr, &data, sizeof(data));
if (err < 0)
return err;
@@ -1872,7 +1928,10 @@ st_lsm6dsx_write_event(struct iio_dev *iio_dev,
if (val < 0 || val > 31)
return -EINVAL;
- reg = &hw->settings->event_settings.sources[event].value;
+ reg = st_lsm6dsx_get_event_reg(hw, event, chan);
+ if (!reg)
+ return -EINVAL;
+
data = ST_LSM6DSX_SHIFT_VAL(val, reg->mask);
err = st_lsm6dsx_update_bits_locked(hw, reg->addr,
reg->mask, data);
@@ -1915,20 +1974,11 @@ st_lsm6dsx_write_event_config(struct iio_dev *iio_dev,
if (event == ST_LSM6DSX_EVENT_MAX)
return -EINVAL;
- if (state) {
+ if (state)
enable_event = hw->enable_event[event] | BIT(axis);
-
- /* do not enable events if they are already enabled */
- if (hw->enable_event[event])
- goto out;
- } else {
+ else
enable_event = hw->enable_event[event] & ~BIT(axis);
- /* only turn off sensor if no events is enabled */
- if (enable_event)
- goto out;
- }
-
/* stop here if no changes have been made */
if (hw->enable_event[event] == enable_event)
return 0;
@@ -1965,7 +2015,6 @@ st_lsm6dsx_write_event_config(struct iio_dev *iio_dev,
if (err < 0)
return err;
-out:
hw->enable_event[event] = enable_event;
return 0;
--
2.39.5
next prev parent reply other threads:[~2025-10-30 7:28 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-30 7:27 [PATCH 0/9] st_lsm6dsx: add tap event detection Francesco Lavra
2025-10-30 7:27 ` [PATCH 1/9] iio: imu: st_lsm6dsx: dynamically initialize iio_chan_spec data Francesco Lavra
2025-10-30 7:57 ` Andy Shevchenko
2025-10-30 11:03 ` Francesco Lavra
2025-10-30 16:42 ` Lorenzo Bianconi
2025-10-31 8:04 ` Francesco Lavra
2025-10-31 8:09 ` Andy Shevchenko
2025-10-31 8:26 ` Francesco Lavra
2025-10-31 8:32 ` Andy Shevchenko
2025-10-31 11:43 ` Francesco Lavra
2025-11-02 11:16 ` Jonathan Cameron
2025-11-03 9:24 ` Francesco Lavra
2025-11-09 13:32 ` Jonathan Cameron
2025-10-30 7:27 ` [PATCH 2/9] iio: imu: st_lsm6dsx: make event_settings more generic Francesco Lavra
2025-10-30 16:44 ` Lorenzo Bianconi
2025-10-31 8:08 ` Francesco Lavra
2025-10-30 7:27 ` [PATCH 3/9] iio: imu: st_lsm6dsx: move wakeup event enable mask to event_src Francesco Lavra
2025-10-30 7:59 ` Andy Shevchenko
2025-10-30 7:27 ` [PATCH 4/9] iio: imu: st_lsm6dsx: dynamically allocate iio_event_spec structs Francesco Lavra
2025-11-02 11:22 ` Jonathan Cameron
2025-10-30 7:27 ` [PATCH 5/9] iio: imu: st_lsm6dsx: rework code to check for enabled events Francesco Lavra
2025-10-30 7:27 ` [PATCH 6/9] iio: imu: st_lsm6dsx: remove event_threshold field from hw struct Francesco Lavra
2025-10-30 8:01 ` Andy Shevchenko
2025-10-30 11:10 ` Francesco Lavra
2025-10-30 13:49 ` Andy Shevchenko
2025-11-02 11:29 ` Jonathan Cameron
2025-11-02 13:45 ` Andy Shevchenko
2025-11-03 9:34 ` Francesco Lavra
2025-11-03 9:40 ` Andy Shevchenko
2025-11-03 14:53 ` David Lechner
2025-11-09 13:31 ` Jonathan Cameron
2025-10-30 7:27 ` [PATCH 7/9] iio: imu: st_lsm6dsx: make event management functions generic Francesco Lavra
2025-10-30 8:15 ` Andy Shevchenko
2025-10-30 11:17 ` Francesco Lavra
2025-10-30 13:36 ` Andy Shevchenko
2025-11-02 11:33 ` Jonathan Cameron
2025-10-30 7:27 ` Francesco Lavra [this message]
2025-10-30 8:24 ` [PATCH 8/9] iio: imu: st_lsm6dsx: add event configurability on a per axis basis Andy Shevchenko
2025-10-30 11:23 ` Francesco Lavra
2025-10-30 13:56 ` Andy Shevchenko
2025-11-17 19:23 ` Francesco Lavra
2025-11-18 10:44 ` Andy Shevchenko
2025-11-18 11:01 ` Francesco Lavra
2025-11-20 9:05 ` Andy Shevchenko
2025-11-20 11:43 ` Francesco Lavra
2025-11-20 13:59 ` Andy Shevchenko
2025-11-20 18:31 ` Andy Shevchenko
2025-11-21 9:14 ` Francesco Lavra
2025-11-21 9:31 ` Andy Shevchenko
2025-11-21 14:57 ` Francesco Lavra
2025-12-07 15:11 ` Jonathan Cameron
2025-10-30 7:27 ` [PATCH 9/9] iio: imu: st_lsm6dsx: add tap event detection Francesco Lavra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251030072752.349633-9-flavra@baylibre.com \
--to=flavra@baylibre.com \
--cc=andy@kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lorenzo@kernel.org \
--cc=nuno.sa@analog.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox