From: Eliad Peller <eliad@wizery.com>
To: Luciano Coelho <coelho@ti.com>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH v2 11/40] wl12xx: update scan cmd api
Date: Sun, 14 Aug 2011 13:17:10 +0300 [thread overview]
Message-ID: <1313317059-16567-12-git-send-email-eliad@wizery.com> (raw)
In-Reply-To: <1313317059-16567-1-git-send-email-eliad@wizery.com>
Update the scan command to use the new fw api
(fw 6/7.3.0.0.75).
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
drivers/net/wireless/wl12xx/scan.c | 8 +++++++-
drivers/net/wireless/wl12xx/scan.h | 25 ++++++++++++++++---------
2 files changed, 23 insertions(+), 10 deletions(-)
diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c
index 78a9b23..54a4e75 100644
--- a/drivers/net/wireless/wl12xx/scan.c
+++ b/drivers/net/wireless/wl12xx/scan.c
@@ -153,24 +153,28 @@ static int wl1271_scan_send(struct wl1271 *wl, enum ieee80211_band band,
scan_options = WL1271_SCAN_OPT_PRIORITY_HIGH;
/* No SSIDs means that we have a forced passive scan */
if (passive || wl->scan.req->n_ssids == 0)
scan_options |= WL1271_SCAN_OPT_PASSIVE;
+ if (WARN_ON(wl->role_id == WL12XX_INVALID_ROLE_ID)) {
+ ret = -EINVAL;
+ goto out;
+ }
+ cmd->params.role_id = wl->role_id;
cmd->params.scan_options = cpu_to_le16(scan_options);
cmd->params.n_ch = wl1271_get_scan_channels(wl, wl->scan.req,
cmd->channels,
band, passive);
if (cmd->params.n_ch == 0) {
ret = WL1271_NOTHING_TO_SCAN;
goto out;
}
cmd->params.tx_rate = cpu_to_le32(basic_rate);
-
cmd->params.n_probe_reqs = wl->conf.scan.num_probe_reqs;
cmd->params.tx_rate = cpu_to_le32(basic_rate);
cmd->params.tid_trigger = 0;
cmd->params.scan_tag = WL1271_SCAN_DEFAULT_TAG;
if (band == IEEE80211_BAND_2GHZ)
@@ -180,12 +184,14 @@ static int wl1271_scan_send(struct wl1271 *wl, enum ieee80211_band band,
if (wl->scan.ssid_len && wl->scan.ssid) {
cmd->params.ssid_len = wl->scan.ssid_len;
memcpy(cmd->params.ssid, wl->scan.ssid, wl->scan.ssid_len);
}
+ memcpy(cmd->addr, wl->mac_addr, ETH_ALEN);
+
ret = wl1271_cmd_build_probe_req(wl, wl->scan.ssid, wl->scan.ssid_len,
wl->scan.req->ie, wl->scan.req->ie_len,
band);
if (ret < 0) {
wl1271_error("PROBE request template failed");
goto out;
diff --git a/drivers/net/wireless/wl12xx/scan.h b/drivers/net/wireless/wl12xx/scan.h
index 0b2a298..9211515 100644
--- a/drivers/net/wireless/wl12xx/scan.h
+++ b/drivers/net/wireless/wl12xx/scan.h
@@ -43,13 +43,16 @@ void wl1271_scan_sched_scan_results(struct wl1271 *wl);
#define WL1271_SCAN_MAX_CHANNELS 24
#define WL1271_SCAN_DEFAULT_TAG 1
#define WL1271_SCAN_CURRENT_TX_PWR 0
#define WL1271_SCAN_OPT_ACTIVE 0
#define WL1271_SCAN_OPT_PASSIVE 1
+#define WL1271_SCAN_OPT_TRIGGERED_SCAN 2
#define WL1271_SCAN_OPT_PRIORITY_HIGH 4
+/* scan even if we fail to enter psm */
+#define WL1271_SCAN_OPT_FORCE 8
#define WL1271_SCAN_BAND_2_4_GHZ 0
#define WL1271_SCAN_BAND_5_GHZ 1
#define WL1271_SCAN_TIMEOUT 10000 /* msec */
enum {
@@ -59,33 +62,33 @@ enum {
WL1271_SCAN_STATE_5GHZ_ACTIVE,
WL1271_SCAN_STATE_5GHZ_PASSIVE,
WL1271_SCAN_STATE_DONE
};
struct basic_scan_params {
- __le32 rx_config_options;
- __le32 rx_filter_options;
/* Scan option flags (WL1271_SCAN_OPT_*) */
__le16 scan_options;
+ u8 role_id;
/* Number of scan channels in the list (maximum 30) */
u8 n_ch;
/* This field indicates the number of probe requests to send
per channel for an active scan */
u8 n_probe_reqs;
- /* Rate bit field for sending the probes */
- __le32 tx_rate;
u8 tid_trigger;
u8 ssid_len;
- /* in order to align */
- u8 padding1[2];
+ u8 use_ssid_list;
+
+ /* Rate bit field for sending the probes */
+ __le32 tx_rate;
+
u8 ssid[IEEE80211_MAX_SSID_LEN];
/* Band to scan */
u8 band;
- u8 use_ssid_list;
+
u8 scan_tag;
- u8 padding2;
+ u8 padding2[2];
} __packed;
struct basic_scan_channel_params {
/* Duration in TU to wait for frames on a channel for active scan */
__le32 min_duration;
__le32 max_duration;
@@ -102,12 +105,16 @@ struct basic_scan_channel_params {
struct wl1271_cmd_scan {
struct wl1271_cmd_header header;
struct basic_scan_params params;
struct basic_scan_channel_params channels[WL1271_SCAN_MAX_CHANNELS];
+
+ /* src mac address */
+ u8 addr[ETH_ALEN];
+ u8 padding[2];
} __packed;
struct wl1271_cmd_trigger_scan_to {
struct wl1271_cmd_header header;
__le32 timeout;
@@ -181,13 +188,13 @@ struct wl1271_cmd_sched_scan_config {
struct conn_scan_ch_params channels_2[MAX_CHANNELS_2GHZ];
struct conn_scan_ch_params channels_5[MAX_CHANNELS_5GHZ];
struct conn_scan_ch_params channels_4[MAX_CHANNELS_4GHZ];
} __packed;
-#define SCHED_SCAN_MAX_SSIDS 8
+#define SCHED_SCAN_MAX_SSIDS 16
enum {
SCAN_SSID_TYPE_PUBLIC = 0,
SCAN_SSID_TYPE_HIDDEN = 1,
};
--
1.7.6.401.g6a319
next prev parent reply other threads:[~2011-08-14 10:17 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-14 10:16 [PATCH v2 00/40] wl12xx: move to wl12xx-fw-3 Eliad Peller
2011-08-14 10:17 ` [PATCH v2 01/40] wl12xx: Revert "wl12xx: schedule TX packets according to FW occupancy" Eliad Peller
2011-08-14 10:17 ` [PATCH v2 02/40] wl12xx: Use a single fw for both STA and AP roles Eliad Peller
2011-08-14 10:17 ` [PATCH v2 03/40] wl12xx: use 1 spare block in all cases Eliad Peller
2011-08-14 10:17 ` [PATCH v2 04/40] wl12xx: temporarily disable advanced ap functions Eliad Peller
2011-08-14 10:17 ` [PATCH v2 05/40] wl12xx: remove rx filtering stuff Eliad Peller
2011-08-14 10:17 ` [PATCH v2 06/40] wl12xx: update fw status struct Eliad Peller
2011-08-14 10:17 ` [PATCH v2 07/40] wl12xx: update acx commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 08/40] wl12xx: update commands & events Eliad Peller
2011-08-14 10:17 ` [PATCH v2 09/40] wl12xx: enable/disable role on interface add/remove Eliad Peller
2011-08-14 10:17 ` [PATCH v2 10/40] wl12xx: add device role commands Eliad Peller
2011-08-14 10:17 ` Eliad Peller [this message]
2011-08-14 10:17 ` [PATCH v2 12/40] wl12xx: update rx/tx Eliad Peller
2011-08-14 10:17 ` [PATCH v2 13/40] wl12xx: change max/default template size Eliad Peller
2011-08-14 10:17 ` [PATCH v2 14/40] wl12xx: use wl1271_acx_beacon_filter_opt for both sta and ap Eliad Peller
2011-08-14 10:17 ` [PATCH v2 15/40] wl12xx: add set_rate_mgmt_params acx Eliad Peller
2011-08-14 10:17 ` [PATCH v2 16/40] wl12xx: add system_hlid Eliad Peller
2011-08-14 10:17 ` [PATCH v2 17/40] wl12xx: add ROC/CROC commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 18/40] wl12xx: replace dummy_join with " Eliad Peller
2011-08-14 10:17 ` [PATCH v2 19/40] wl12xx: handle dummy packet event also in ap mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 20/40] wl12xx: update BT coex configuration params Eliad Peller
2011-08-14 10:17 ` [PATCH v2 21/40] wl12xx: fix session counter Eliad Peller
2011-08-14 10:17 ` [PATCH v2 22/40] wl12xx: use dynamic hlids for AP-mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 23/40] wl12xx: re-enable block ack session support Eliad Peller
2011-08-14 10:17 ` [PATCH v2 24/40] wl12xx: call wl12xx_cmd_set_peer_state() in AP mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 25/40] wl12xx: don't remove key if hlid was already deleted Eliad Peller
2011-08-14 10:17 ` [PATCH v2 26/40] wl12xx: add wl12xx_cmd_role_start_ibss() Eliad Peller
2011-08-14 10:17 ` [PATCH v2 27/40] wl12xx: support IBSS vif type Eliad Peller
2011-08-14 10:17 ` [PATCH v2 28/40] wl12xx: AP-mode - set STA HT capabilities when adding a STA Eliad Peller
2011-08-14 10:17 ` [PATCH v2 29/40] wl12xx: AP-mode - configure STA HT rates on join Eliad Peller
2011-08-14 10:17 ` [PATCH v2 30/40] wl12xx: AP-mode - configure HT rate support to the FW Eliad Peller
2011-08-14 10:17 ` [PATCH v2 31/40] wl12xx: use ap_bcast_hlid for recorded keys Eliad Peller
2011-08-14 10:17 ` [PATCH v2 32/40] wl12xx: don't remove key if hlid was already deleted Eliad Peller
2011-08-14 10:17 ` [PATCH v2 33/40] wl12xx: track freed packets in FW by AC Eliad Peller
2011-08-14 10:17 ` [PATCH v2 34/40] wl12xx: schedule TX packets according to FW packet occupancy Eliad Peller
2011-08-14 10:17 ` [PATCH v2 35/40] wl12xx: handle wrap-around overflow in released Tx blocks FW counter Eliad Peller
2011-08-14 10:17 ` [PATCH v2 36/40] wl12xx: enable AP advanced functionality Eliad Peller
2011-08-14 10:17 ` [PATCH v2 37/40] wl12xx: don't wait for disconnection event Eliad Peller
2011-08-14 10:17 ` [PATCH v2 38/40] wl12xx: set the AP-started flag only after setting keys Eliad Peller
2011-08-14 10:17 ` [PATCH v2 39/40] wl12xx: AP-mode - prevent Tx to stale/invalid stations Eliad Peller
2011-08-14 10:17 ` [PATCH v2 40/40] wl12xx: fix tx_queue_count spurious increment Eliad Peller
2011-08-22 11:11 ` [PATCH v2 00/40] wl12xx: move to wl12xx-fw-3 Luciano Coelho
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1313317059-16567-12-git-send-email-eliad@wizery.com \
--to=eliad@wizery.com \
--cc=coelho@ti.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox