From: Eliad Peller <eliad@wizery.com>
To: Luciano Coelho <coelho@ti.com>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH v2 04/40] wl12xx: temporarily disable advanced ap functions
Date: Sun, 14 Aug 2011 13:17:03 +0300 [thread overview]
Message-ID: <1313317059-16567-5-git-send-email-eliad@wizery.com> (raw)
In-Reply-To: <1313317059-16567-1-git-send-email-eliad@wizery.com>
In order to keep to driver compiling during the patchset,
while avoiding one-huge-patch, temporarily disable some
advanced ap functions.
These changes will be reverted later in the patchset, as
part of the patches for advanced ap functions support.
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
v2: don't disable 11n
drivers/net/wireless/wl12xx/main.c | 4 ++++
drivers/net/wireless/wl12xx/tx.c | 4 ++++
2 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 7b29573..4fa7602 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -770,12 +770,13 @@ static int wl1271_plt_init(struct wl1271 *wl)
kfree(wl->target_mem_map);
wl->target_mem_map = NULL;
return ret;
}
+#if 0
static void wl1271_irq_ps_regulate_link(struct wl1271 *wl, u8 hlid, u8 tx_blks)
{
bool fw_ps;
/* only regulate station links */
if (hlid < WL1271_AP_STA_HLID_START)
@@ -820,12 +821,13 @@ static void wl1271_irq_update_links_status(struct wl1271 *wl,
wl->links[hlid].allocated_blks -= cnt;
wl1271_irq_ps_regulate_link(wl, hlid,
wl->links[hlid].allocated_blks);
}
}
+#endif
static void wl1271_fw_status(struct wl1271 *wl,
struct wl1271_fw_full_status *full_status)
{
struct wl1271_fw_common_status *status = &full_status->common;
struct timespec ts;
@@ -858,13 +860,15 @@ static void wl1271_fw_status(struct wl1271 *wl,
}
wl->tx_allocated_blocks -= freed_blocks;
if (wl->bss_type == BSS_TYPE_AP_BSS) {
/* Update num of allocated TX blocks per link and ps status */
+#if 0
wl1271_irq_update_links_status(wl, &full_status->ap);
+#endif
wl->tx_blocks_available += freed_blocks;
} else {
int avail = full_status->sta.tx_total - wl->tx_allocated_blocks;
/*
* The FW might change the total number of TX memblocks before
diff --git a/drivers/net/wireless/wl12xx/tx.c b/drivers/net/wireless/wl12xx/tx.c
index c67340f..938af1d 100644
--- a/drivers/net/wireless/wl12xx/tx.c
+++ b/drivers/net/wireless/wl12xx/tx.c
@@ -108,12 +108,13 @@ static void wl1271_tx_ap_update_inconnection_sta(struct wl1271 *wl,
hdr = (struct ieee80211_hdr *)(skb->data +
sizeof(struct wl1271_tx_hw_descr));
if (ieee80211_is_auth(hdr->frame_control))
wl1271_acx_set_inconnection_sta(wl, hdr->addr1);
}
+#if 0
static void wl1271_tx_regulate_link(struct wl1271 *wl, u8 hlid)
{
bool fw_ps;
u8 tx_blks;
/* only regulate station links */
@@ -127,12 +128,13 @@ static void wl1271_tx_regulate_link(struct wl1271 *wl, u8 hlid)
* if in FW PS and there is enough data in FW we can put the link
* into high-level PS and clean out its TX queues.
*/
if (fw_ps && tx_blks >= WL1271_PS_STA_MAX_BLOCKS)
wl1271_ps_link_start(wl, hlid, true);
}
+#endif
u8 wl1271_tx_get_hlid(struct sk_buff *skb)
{
struct ieee80211_tx_info *control = IEEE80211_SKB_CB(skb);
if (control->control.sta) {
@@ -381,13 +383,15 @@ static int wl1271_prepare_tx_frame(struct wl1271 *wl, struct sk_buff *skb,
return ret;
wl1271_tx_fill_hdr(wl, skb, extra, info, hlid);
if (wl->bss_type == BSS_TYPE_AP_BSS) {
wl1271_tx_ap_update_inconnection_sta(wl, skb);
+#if 0
wl1271_tx_regulate_link(wl, hlid);
+#endif
} else {
wl1271_tx_update_filters(wl, skb);
}
/*
* The length of each packet is stored in terms of
--
1.7.6.401.g6a319
next prev parent reply other threads:[~2011-08-14 10:17 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-14 10:16 [PATCH v2 00/40] wl12xx: move to wl12xx-fw-3 Eliad Peller
2011-08-14 10:17 ` [PATCH v2 01/40] wl12xx: Revert "wl12xx: schedule TX packets according to FW occupancy" Eliad Peller
2011-08-14 10:17 ` [PATCH v2 02/40] wl12xx: Use a single fw for both STA and AP roles Eliad Peller
2011-08-14 10:17 ` [PATCH v2 03/40] wl12xx: use 1 spare block in all cases Eliad Peller
2011-08-14 10:17 ` Eliad Peller [this message]
2011-08-14 10:17 ` [PATCH v2 05/40] wl12xx: remove rx filtering stuff Eliad Peller
2011-08-14 10:17 ` [PATCH v2 06/40] wl12xx: update fw status struct Eliad Peller
2011-08-14 10:17 ` [PATCH v2 07/40] wl12xx: update acx commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 08/40] wl12xx: update commands & events Eliad Peller
2011-08-14 10:17 ` [PATCH v2 09/40] wl12xx: enable/disable role on interface add/remove Eliad Peller
2011-08-14 10:17 ` [PATCH v2 10/40] wl12xx: add device role commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 11/40] wl12xx: update scan cmd api Eliad Peller
2011-08-14 10:17 ` [PATCH v2 12/40] wl12xx: update rx/tx Eliad Peller
2011-08-14 10:17 ` [PATCH v2 13/40] wl12xx: change max/default template size Eliad Peller
2011-08-14 10:17 ` [PATCH v2 14/40] wl12xx: use wl1271_acx_beacon_filter_opt for both sta and ap Eliad Peller
2011-08-14 10:17 ` [PATCH v2 15/40] wl12xx: add set_rate_mgmt_params acx Eliad Peller
2011-08-14 10:17 ` [PATCH v2 16/40] wl12xx: add system_hlid Eliad Peller
2011-08-14 10:17 ` [PATCH v2 17/40] wl12xx: add ROC/CROC commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 18/40] wl12xx: replace dummy_join with " Eliad Peller
2011-08-14 10:17 ` [PATCH v2 19/40] wl12xx: handle dummy packet event also in ap mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 20/40] wl12xx: update BT coex configuration params Eliad Peller
2011-08-14 10:17 ` [PATCH v2 21/40] wl12xx: fix session counter Eliad Peller
2011-08-14 10:17 ` [PATCH v2 22/40] wl12xx: use dynamic hlids for AP-mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 23/40] wl12xx: re-enable block ack session support Eliad Peller
2011-08-14 10:17 ` [PATCH v2 24/40] wl12xx: call wl12xx_cmd_set_peer_state() in AP mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 25/40] wl12xx: don't remove key if hlid was already deleted Eliad Peller
2011-08-14 10:17 ` [PATCH v2 26/40] wl12xx: add wl12xx_cmd_role_start_ibss() Eliad Peller
2011-08-14 10:17 ` [PATCH v2 27/40] wl12xx: support IBSS vif type Eliad Peller
2011-08-14 10:17 ` [PATCH v2 28/40] wl12xx: AP-mode - set STA HT capabilities when adding a STA Eliad Peller
2011-08-14 10:17 ` [PATCH v2 29/40] wl12xx: AP-mode - configure STA HT rates on join Eliad Peller
2011-08-14 10:17 ` [PATCH v2 30/40] wl12xx: AP-mode - configure HT rate support to the FW Eliad Peller
2011-08-14 10:17 ` [PATCH v2 31/40] wl12xx: use ap_bcast_hlid for recorded keys Eliad Peller
2011-08-14 10:17 ` [PATCH v2 32/40] wl12xx: don't remove key if hlid was already deleted Eliad Peller
2011-08-14 10:17 ` [PATCH v2 33/40] wl12xx: track freed packets in FW by AC Eliad Peller
2011-08-14 10:17 ` [PATCH v2 34/40] wl12xx: schedule TX packets according to FW packet occupancy Eliad Peller
2011-08-14 10:17 ` [PATCH v2 35/40] wl12xx: handle wrap-around overflow in released Tx blocks FW counter Eliad Peller
2011-08-14 10:17 ` [PATCH v2 36/40] wl12xx: enable AP advanced functionality Eliad Peller
2011-08-14 10:17 ` [PATCH v2 37/40] wl12xx: don't wait for disconnection event Eliad Peller
2011-08-14 10:17 ` [PATCH v2 38/40] wl12xx: set the AP-started flag only after setting keys Eliad Peller
2011-08-14 10:17 ` [PATCH v2 39/40] wl12xx: AP-mode - prevent Tx to stale/invalid stations Eliad Peller
2011-08-14 10:17 ` [PATCH v2 40/40] wl12xx: fix tx_queue_count spurious increment Eliad Peller
2011-08-22 11:11 ` [PATCH v2 00/40] wl12xx: move to wl12xx-fw-3 Luciano Coelho
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1313317059-16567-5-git-send-email-eliad@wizery.com \
--to=eliad@wizery.com \
--cc=coelho@ti.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox