Linux wireless drivers development
 help / color / mirror / Atom feed
From: Eliad Peller <eliad@wizery.com>
To: Luciano Coelho <coelho@ti.com>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH v2 39/40] wl12xx: AP-mode - prevent Tx to stale/invalid stations
Date: Sun, 14 Aug 2011 13:17:38 +0300	[thread overview]
Message-ID: <1313317059-16567-40-git-send-email-eliad@wizery.com> (raw)
In-Reply-To: <1313317059-16567-1-git-send-email-eliad@wizery.com>

From: Arik Nemtsov <arik@wizery.com>

Don't pollute the queues with Tx directed to invalid stations. This
can happen during recovery.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
 drivers/net/wireless/wl12xx/main.c |   20 +++++++++++++++++---
 1 files changed, 17 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index cf5835b..6c56bef 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -776,13 +776,19 @@ static void wl12xx_irq_ps_regulate_link(struct wl1271 *wl, u8 hlid, u8 tx_pkts)
 	else if (fw_ps && tx_pkts >= WL1271_PS_STA_MAX_PACKETS)
 		wl1271_ps_link_start(wl, hlid, true);
 }
 
 bool wl1271_is_active_sta(struct wl1271 *wl, u8 hlid)
 {
-	int id = hlid - WL1271_AP_STA_HLID_START;
+	int id;
+
+	/* global/broadcast "stations" are always active */
+	if (hlid < WL1271_AP_STA_HLID_START)
+		return true;
+
+	id = hlid - WL1271_AP_STA_HLID_START;
 	return test_bit(id, wl->ap_hlid_map);
 }
 
 static void wl12xx_irq_update_links_status(struct wl1271 *wl,
 					   struct wl12xx_fw_status *status)
 {
@@ -1490,12 +1496,19 @@ static void wl1271_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 		ieee80211_stop_queue(wl->hw, mapping);
 		set_bit(q, &wl->stopped_queues_map);
 	}
 
 	/* queue the packet */
 	if (wl->bss_type == BSS_TYPE_AP_BSS) {
+		if (!wl1271_is_active_sta(wl, hlid)) {
+			wl1271_debug(DEBUG_TX, "DROP skb hlid %d q %d",
+				     hlid, q);
+			dev_kfree_skb(skb);
+			goto out;
+		}
+
 		wl1271_debug(DEBUG_TX, "queue skb hlid %d q %d", hlid, q);
 		skb_queue_tail(&wl->links[hlid].tx_queue[q], skb);
 	} else {
 		skb_queue_tail(&wl->tx_queue[q], skb);
 	}
 
@@ -1505,12 +1518,13 @@ static void wl1271_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	 */
 
 	if (!test_bit(WL1271_FLAG_FW_TX_BUSY, &wl->flags) &&
 	    !test_bit(WL1271_FLAG_TX_PENDING, &wl->flags))
 		ieee80211_queue_work(wl->hw, &wl->tx_work);
 
+out:
 	spin_unlock_irqrestore(&wl->wl_lock, flags);
 }
 
 int wl1271_tx_dummy_packet(struct wl1271 *wl)
 {
 	unsigned long flags;
@@ -3692,13 +3706,13 @@ static int wl1271_allocate_sta(struct wl1271 *wl,
 	if (id >= AP_MAX_STATIONS) {
 		wl1271_warning("could not allocate HLID - too much stations");
 		return -EBUSY;
 	}
 
 	wl_sta = (struct wl1271_station *)sta->drv_priv;
-	__set_bit(id, wl->ap_hlid_map);
+	set_bit(id, wl->ap_hlid_map);
 	wl_sta->hlid = WL1271_AP_STA_HLID_START + id;
 	*hlid = wl_sta->hlid;
 	memcpy(wl->links[wl_sta->hlid].addr, sta->addr, ETH_ALEN);
 	return 0;
 }
 
@@ -3706,13 +3720,13 @@ static void wl1271_free_sta(struct wl1271 *wl, u8 hlid)
 {
 	int id = hlid - WL1271_AP_STA_HLID_START;
 
 	if (WARN_ON(!test_bit(id, wl->ap_hlid_map)))
 		return;
 
-	__clear_bit(id, wl->ap_hlid_map);
+	clear_bit(id, wl->ap_hlid_map);
 	memset(wl->links[hlid].addr, 0, ETH_ALEN);
 	wl->links[hlid].ba_bitmap = 0;
 	wl1271_tx_reset_link_queues(wl, hlid);
 	__clear_bit(hlid, &wl->ap_ps_map);
 	__clear_bit(hlid, (unsigned long *)&wl->ap_fw_ps_map);
 }
-- 
1.7.6.401.g6a319


  parent reply	other threads:[~2011-08-14 10:18 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-08-14 10:16 [PATCH v2 00/40] wl12xx: move to wl12xx-fw-3 Eliad Peller
2011-08-14 10:17 ` [PATCH v2 01/40] wl12xx: Revert "wl12xx: schedule TX packets according to FW occupancy" Eliad Peller
2011-08-14 10:17 ` [PATCH v2 02/40] wl12xx: Use a single fw for both STA and AP roles Eliad Peller
2011-08-14 10:17 ` [PATCH v2 03/40] wl12xx: use 1 spare block in all cases Eliad Peller
2011-08-14 10:17 ` [PATCH v2 04/40] wl12xx: temporarily disable advanced ap functions Eliad Peller
2011-08-14 10:17 ` [PATCH v2 05/40] wl12xx: remove rx filtering stuff Eliad Peller
2011-08-14 10:17 ` [PATCH v2 06/40] wl12xx: update fw status struct Eliad Peller
2011-08-14 10:17 ` [PATCH v2 07/40] wl12xx: update acx commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 08/40] wl12xx: update commands & events Eliad Peller
2011-08-14 10:17 ` [PATCH v2 09/40] wl12xx: enable/disable role on interface add/remove Eliad Peller
2011-08-14 10:17 ` [PATCH v2 10/40] wl12xx: add device role commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 11/40] wl12xx: update scan cmd api Eliad Peller
2011-08-14 10:17 ` [PATCH v2 12/40] wl12xx: update rx/tx Eliad Peller
2011-08-14 10:17 ` [PATCH v2 13/40] wl12xx: change max/default template size Eliad Peller
2011-08-14 10:17 ` [PATCH v2 14/40] wl12xx: use wl1271_acx_beacon_filter_opt for both sta and ap Eliad Peller
2011-08-14 10:17 ` [PATCH v2 15/40] wl12xx: add set_rate_mgmt_params acx Eliad Peller
2011-08-14 10:17 ` [PATCH v2 16/40] wl12xx: add system_hlid Eliad Peller
2011-08-14 10:17 ` [PATCH v2 17/40] wl12xx: add ROC/CROC commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 18/40] wl12xx: replace dummy_join with " Eliad Peller
2011-08-14 10:17 ` [PATCH v2 19/40] wl12xx: handle dummy packet event also in ap mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 20/40] wl12xx: update BT coex configuration params Eliad Peller
2011-08-14 10:17 ` [PATCH v2 21/40] wl12xx: fix session counter Eliad Peller
2011-08-14 10:17 ` [PATCH v2 22/40] wl12xx: use dynamic hlids for AP-mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 23/40] wl12xx: re-enable block ack session support Eliad Peller
2011-08-14 10:17 ` [PATCH v2 24/40] wl12xx: call wl12xx_cmd_set_peer_state() in AP mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 25/40] wl12xx: don't remove key if hlid was already deleted Eliad Peller
2011-08-14 10:17 ` [PATCH v2 26/40] wl12xx: add wl12xx_cmd_role_start_ibss() Eliad Peller
2011-08-14 10:17 ` [PATCH v2 27/40] wl12xx: support IBSS vif type Eliad Peller
2011-08-14 10:17 ` [PATCH v2 28/40] wl12xx: AP-mode - set STA HT capabilities when adding a STA Eliad Peller
2011-08-14 10:17 ` [PATCH v2 29/40] wl12xx: AP-mode - configure STA HT rates on join Eliad Peller
2011-08-14 10:17 ` [PATCH v2 30/40] wl12xx: AP-mode - configure HT rate support to the FW Eliad Peller
2011-08-14 10:17 ` [PATCH v2 31/40] wl12xx: use ap_bcast_hlid for recorded keys Eliad Peller
2011-08-14 10:17 ` [PATCH v2 32/40] wl12xx: don't remove key if hlid was already deleted Eliad Peller
2011-08-14 10:17 ` [PATCH v2 33/40] wl12xx: track freed packets in FW by AC Eliad Peller
2011-08-14 10:17 ` [PATCH v2 34/40] wl12xx: schedule TX packets according to FW packet occupancy Eliad Peller
2011-08-14 10:17 ` [PATCH v2 35/40] wl12xx: handle wrap-around overflow in released Tx blocks FW counter Eliad Peller
2011-08-14 10:17 ` [PATCH v2 36/40] wl12xx: enable AP advanced functionality Eliad Peller
2011-08-14 10:17 ` [PATCH v2 37/40] wl12xx: don't wait for disconnection event Eliad Peller
2011-08-14 10:17 ` [PATCH v2 38/40] wl12xx: set the AP-started flag only after setting keys Eliad Peller
2011-08-14 10:17 ` Eliad Peller [this message]
2011-08-14 10:17 ` [PATCH v2 40/40] wl12xx: fix tx_queue_count spurious increment Eliad Peller
2011-08-22 11:11 ` [PATCH v2 00/40] wl12xx: move to wl12xx-fw-3 Luciano Coelho

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1313317059-16567-40-git-send-email-eliad@wizery.com \
    --to=eliad@wizery.com \
    --cc=coelho@ti.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox