From: Eliad Peller <eliad@wizery.com>
To: Luciano Coelho <coelho@ti.com>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH v2 26/40] wl12xx: add wl12xx_cmd_role_start_ibss()
Date: Sun, 14 Aug 2011 13:17:25 +0300 [thread overview]
Message-ID: <1313317059-16567-27-git-send-email-eliad@wizery.com> (raw)
In-Reply-To: <1313317059-16567-1-git-send-email-eliad@wizery.com>
Add wl12xx_cmd_role_start_ibss() implementation and defintion.
This function is used in order to start the IBSS role.
Stopping the IBSS is done by using the same api as stop STA,
so there is no need for a separate function.
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
v2: set cmd->band instead of bitwise-OR-ing it.
drivers/net/wireless/wl12xx/cmd.c | 62 +++++++++++++++++++++++++++++++++++++
drivers/net/wireless/wl12xx/cmd.h | 1 +
2 files changed, 63 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/wl12xx/cmd.c b/drivers/net/wireless/wl12xx/cmd.c
index 261807b..d8c3916 100644
--- a/drivers/net/wireless/wl12xx/cmd.c
+++ b/drivers/net/wireless/wl12xx/cmd.c
@@ -614,12 +614,13 @@ out_free:
kfree(cmd);
out:
return ret;
}
+/* use this function to stop ibss as well */
int wl12xx_cmd_role_stop_sta(struct wl1271 *wl)
{
struct wl12xx_cmd_role_stop *cmd;
int ret;
if (WARN_ON(wl->sta_hlid == WL12XX_INVALID_LINK_ID))
@@ -767,12 +768,73 @@ out_free:
kfree(cmd);
out:
return ret;
}
+int wl12xx_cmd_role_start_ibss(struct wl1271 *wl)
+{
+ struct wl12xx_cmd_role_start *cmd;
+ struct ieee80211_bss_conf *bss_conf = &wl->vif->bss_conf;
+ int ret;
+
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (!cmd) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ wl1271_debug(DEBUG_CMD, "cmd role start ibss %d", wl->role_id);
+
+ cmd->role_id = wl->role_id;
+ if (wl->band == IEEE80211_BAND_5GHZ)
+ cmd->band = WL12XX_BAND_5GHZ;
+ cmd->channel = wl->channel;
+ cmd->ibss.basic_rate_set = cpu_to_le32(wl->basic_rate_set);
+ cmd->ibss.beacon_interval = cpu_to_le16(wl->beacon_int);
+ cmd->ibss.dtim_interval = bss_conf->dtim_period;
+ cmd->ibss.ssid_type = WL12XX_SSID_TYPE_ANY;
+ cmd->ibss.ssid_len = wl->ssid_len;
+ memcpy(cmd->ibss.ssid, wl->ssid, wl->ssid_len);
+ memcpy(cmd->ibss.bssid, wl->bssid, ETH_ALEN);
+ cmd->sta.local_rates = cpu_to_le32(wl->rate_set);
+
+ if (wl->sta_hlid == WL12XX_INVALID_LINK_ID) {
+ ret = wl12xx_allocate_link(wl, &wl->sta_hlid);
+ if (ret)
+ goto out_free;
+ }
+ cmd->ibss.hlid = wl->sta_hlid;
+ cmd->ibss.remote_rates = cpu_to_le32(wl->rate_set);
+
+ wl1271_debug(DEBUG_CMD, "role start: roleid=%d, hlid=%d, session=%d "
+ "basic_rate_set: 0x%x, remote_rates: 0x%x",
+ wl->role_id, cmd->sta.hlid, cmd->sta.session,
+ wl->basic_rate_set, wl->rate_set);
+
+ wl1271_debug(DEBUG_CMD, "wl->bssid = %pM", wl->bssid);
+
+ ret = wl1271_cmd_send(wl, CMD_ROLE_START, cmd, sizeof(*cmd), 0);
+ if (ret < 0) {
+ wl1271_error("failed to initiate cmd role enable");
+ goto err_hlid;
+ }
+
+ goto out_free;
+
+err_hlid:
+ /* clear links on error. */
+ wl12xx_free_link(wl, &wl->sta_hlid);
+
+out_free:
+ kfree(cmd);
+
+out:
+ return ret;
+}
+
/**
* send test command to firmware
*
* @wl: wl struct
* @buf: buffer containing the command, with all headers, must work with dma
diff --git a/drivers/net/wireless/wl12xx/cmd.h b/drivers/net/wireless/wl12xx/cmd.h
index 740d27e..22c2f37 100644
--- a/drivers/net/wireless/wl12xx/cmd.h
+++ b/drivers/net/wireless/wl12xx/cmd.h
@@ -41,12 +41,13 @@ int wl12xx_cmd_role_disable(struct wl1271 *wl, u8 *role_id);
int wl12xx_cmd_role_start_dev(struct wl1271 *wl);
int wl12xx_cmd_role_stop_dev(struct wl1271 *wl);
int wl12xx_cmd_role_start_sta(struct wl1271 *wl);
int wl12xx_cmd_role_stop_sta(struct wl1271 *wl);
int wl12xx_cmd_role_start_ap(struct wl1271 *wl);
int wl12xx_cmd_role_stop_ap(struct wl1271 *wl);
+int wl12xx_cmd_role_start_ibss(struct wl1271 *wl);
int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer);
int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len);
int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len);
int wl1271_cmd_data_path(struct wl1271 *wl, bool enable);
int wl1271_cmd_ps_mode(struct wl1271 *wl, u8 ps_mode);
int wl1271_cmd_read_memory(struct wl1271 *wl, u32 addr, void *answer,
--
1.7.6.401.g6a319
next prev parent reply other threads:[~2011-08-14 10:17 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-14 10:16 [PATCH v2 00/40] wl12xx: move to wl12xx-fw-3 Eliad Peller
2011-08-14 10:17 ` [PATCH v2 01/40] wl12xx: Revert "wl12xx: schedule TX packets according to FW occupancy" Eliad Peller
2011-08-14 10:17 ` [PATCH v2 02/40] wl12xx: Use a single fw for both STA and AP roles Eliad Peller
2011-08-14 10:17 ` [PATCH v2 03/40] wl12xx: use 1 spare block in all cases Eliad Peller
2011-08-14 10:17 ` [PATCH v2 04/40] wl12xx: temporarily disable advanced ap functions Eliad Peller
2011-08-14 10:17 ` [PATCH v2 05/40] wl12xx: remove rx filtering stuff Eliad Peller
2011-08-14 10:17 ` [PATCH v2 06/40] wl12xx: update fw status struct Eliad Peller
2011-08-14 10:17 ` [PATCH v2 07/40] wl12xx: update acx commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 08/40] wl12xx: update commands & events Eliad Peller
2011-08-14 10:17 ` [PATCH v2 09/40] wl12xx: enable/disable role on interface add/remove Eliad Peller
2011-08-14 10:17 ` [PATCH v2 10/40] wl12xx: add device role commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 11/40] wl12xx: update scan cmd api Eliad Peller
2011-08-14 10:17 ` [PATCH v2 12/40] wl12xx: update rx/tx Eliad Peller
2011-08-14 10:17 ` [PATCH v2 13/40] wl12xx: change max/default template size Eliad Peller
2011-08-14 10:17 ` [PATCH v2 14/40] wl12xx: use wl1271_acx_beacon_filter_opt for both sta and ap Eliad Peller
2011-08-14 10:17 ` [PATCH v2 15/40] wl12xx: add set_rate_mgmt_params acx Eliad Peller
2011-08-14 10:17 ` [PATCH v2 16/40] wl12xx: add system_hlid Eliad Peller
2011-08-14 10:17 ` [PATCH v2 17/40] wl12xx: add ROC/CROC commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 18/40] wl12xx: replace dummy_join with " Eliad Peller
2011-08-14 10:17 ` [PATCH v2 19/40] wl12xx: handle dummy packet event also in ap mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 20/40] wl12xx: update BT coex configuration params Eliad Peller
2011-08-14 10:17 ` [PATCH v2 21/40] wl12xx: fix session counter Eliad Peller
2011-08-14 10:17 ` [PATCH v2 22/40] wl12xx: use dynamic hlids for AP-mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 23/40] wl12xx: re-enable block ack session support Eliad Peller
2011-08-14 10:17 ` [PATCH v2 24/40] wl12xx: call wl12xx_cmd_set_peer_state() in AP mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 25/40] wl12xx: don't remove key if hlid was already deleted Eliad Peller
2011-08-14 10:17 ` Eliad Peller [this message]
2011-08-14 10:17 ` [PATCH v2 27/40] wl12xx: support IBSS vif type Eliad Peller
2011-08-14 10:17 ` [PATCH v2 28/40] wl12xx: AP-mode - set STA HT capabilities when adding a STA Eliad Peller
2011-08-14 10:17 ` [PATCH v2 29/40] wl12xx: AP-mode - configure STA HT rates on join Eliad Peller
2011-08-14 10:17 ` [PATCH v2 30/40] wl12xx: AP-mode - configure HT rate support to the FW Eliad Peller
2011-08-14 10:17 ` [PATCH v2 31/40] wl12xx: use ap_bcast_hlid for recorded keys Eliad Peller
2011-08-14 10:17 ` [PATCH v2 32/40] wl12xx: don't remove key if hlid was already deleted Eliad Peller
2011-08-14 10:17 ` [PATCH v2 33/40] wl12xx: track freed packets in FW by AC Eliad Peller
2011-08-14 10:17 ` [PATCH v2 34/40] wl12xx: schedule TX packets according to FW packet occupancy Eliad Peller
2011-08-14 10:17 ` [PATCH v2 35/40] wl12xx: handle wrap-around overflow in released Tx blocks FW counter Eliad Peller
2011-08-14 10:17 ` [PATCH v2 36/40] wl12xx: enable AP advanced functionality Eliad Peller
2011-08-14 10:17 ` [PATCH v2 37/40] wl12xx: don't wait for disconnection event Eliad Peller
2011-08-14 10:17 ` [PATCH v2 38/40] wl12xx: set the AP-started flag only after setting keys Eliad Peller
2011-08-14 10:17 ` [PATCH v2 39/40] wl12xx: AP-mode - prevent Tx to stale/invalid stations Eliad Peller
2011-08-14 10:17 ` [PATCH v2 40/40] wl12xx: fix tx_queue_count spurious increment Eliad Peller
2011-08-22 11:11 ` [PATCH v2 00/40] wl12xx: move to wl12xx-fw-3 Luciano Coelho
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1313317059-16567-27-git-send-email-eliad@wizery.com \
--to=eliad@wizery.com \
--cc=coelho@ti.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox