From: Eliad Peller <eliad@wizery.com>
To: Luciano Coelho <coelho@ti.com>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH v2 12/40] wl12xx: update rx/tx
Date: Sun, 14 Aug 2011 13:17:11 +0300 [thread overview]
Message-ID: <1313317059-16567-13-git-send-email-eliad@wizery.com> (raw)
In-Reply-To: <1313317059-16567-1-git-send-email-eliad@wizery.com>
Update the rx/tx descriptors according to the new fw api
(fw >= 6/7.3.0.0.75)
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
drivers/net/wireless/wl12xx/rx.h | 7 ++-----
drivers/net/wireless/wl12xx/tx.c | 15 +++++++++++----
drivers/net/wireless/wl12xx/tx.h | 14 ++++----------
drivers/net/wireless/wl12xx/wl12xx.h | 2 +-
4 files changed, 18 insertions(+), 20 deletions(-)
diff --git a/drivers/net/wireless/wl12xx/rx.h b/drivers/net/wireless/wl12xx/rx.h
index 00c1c1d..86ba6b1 100644
--- a/drivers/net/wireless/wl12xx/rx.h
+++ b/drivers/net/wireless/wl12xx/rx.h
@@ -83,13 +83,13 @@
* RX Descriptor status
*
* Bits 0-2 - error code
* Bits 3-5 - process_id tag (AP mode FW)
* Bits 6-7 - reserved
*/
-#define WL1271_RX_DESC_STATUS_MASK 0x07
+#define WL1271_RX_DESC_STATUS_MASK 0x03
#define WL1271_RX_DESC_SUCCESS 0x00
#define WL1271_RX_DESC_DECRYPT_FAIL 0x01
#define WL1271_RX_DESC_MIC_FAIL 0x02
#define WL1271_RX_DESC_DRIVER_RX_Q_FAIL 0x03
@@ -118,16 +118,13 @@ struct wl1271_rx_descriptor {
u8 rate;
u8 channel;
s8 rssi;
u8 snr;
__le32 timestamp;
u8 packet_class;
- union {
- u8 process_id; /* STA FW */
- u8 hlid; /* AP FW */
- } __packed;
+ u8 hlid;
u8 pad_len;
u8 reserved;
} __packed;
void wl12xx_rx(struct wl1271 *wl, struct wl12xx_fw_status *status);
u8 wl1271_rate_to_idx(int rate, enum ieee80211_band band);
diff --git a/drivers/net/wireless/wl12xx/tx.c b/drivers/net/wireless/wl12xx/tx.c
index f497336..23ce7aa 100644
--- a/drivers/net/wireless/wl12xx/tx.c
+++ b/drivers/net/wireless/wl12xx/tx.c
@@ -273,24 +273,23 @@ static void wl1271_tx_fill_hdr(struct wl1271 *wl, struct sk_buff *skb,
} else {
/* configure the tx attributes */
tx_attr =
wl->session_counter << TX_HW_ATTR_OFST_SESSION_COUNTER;
}
- if (wl->bss_type != BSS_TYPE_AP_BSS) {
- desc->aid = hlid;
+ desc->hlid = hlid;
+ if (wl->bss_type != BSS_TYPE_AP_BSS) {
/* if the packets are destined for AP (have a STA entry)
send them with AP rate policies, otherwise use default
basic rates */
if (control->control.sta)
rate_idx = ACX_TX_AP_FULL_RATE;
else
rate_idx = ACX_TX_BASIC_RATE;
} else {
- desc->hlid = hlid;
switch (hlid) {
case WL1271_AP_GLOBAL_HLID:
rate_idx = ACX_TX_AP_MODE_MGMT_RATE;
break;
case WL1271_AP_BROADCAST_HLID:
rate_idx = ACX_TX_AP_MODE_BCST_RATE;
@@ -372,13 +371,21 @@ static int wl1271_prepare_tx_frame(struct wl1271 *wl, struct sk_buff *skb,
}
}
if (wl->bss_type == BSS_TYPE_AP_BSS)
hlid = wl1271_tx_get_hlid(skb);
else
- hlid = TX_HW_DEFAULT_AID;
+ if (test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags))
+ hlid = wl->sta_hlid;
+ else
+ hlid = wl->dev_hlid;
+
+ if (hlid == WL12XX_INVALID_LINK_ID) {
+ wl1271_error("invalid hlid. dropping skb 0x%p", skb);
+ return -EINVAL;
+ }
ret = wl1271_tx_allocate(wl, skb, extra, buf_offset, hlid);
if (ret < 0)
return ret;
wl1271_tx_fill_hdr(wl, skb, extra, info, hlid);
diff --git a/drivers/net/wireless/wl12xx/tx.h b/drivers/net/wireless/wl12xx/tx.h
index 5d719b5..b712d7b 100644
--- a/drivers/net/wireless/wl12xx/tx.h
+++ b/drivers/net/wireless/wl12xx/tx.h
@@ -26,15 +26,12 @@
#define __TX_H__
#define TX_HW_BLOCK_SIZE 252
#define TX_HW_MGMT_PKT_LIFETIME_TU 2000
#define TX_HW_AP_MODE_PKT_LIFETIME_TU 8000
-/* The chipset reference driver states, that the "aid" value 1
- * is for infra-BSS, but is still always used */
-#define TX_HW_DEFAULT_AID 1
#define TX_HW_ATTR_SAVE_RETRIES BIT(0)
#define TX_HW_ATTR_HEADER_PAD BIT(1)
#define TX_HW_ATTR_SESSION_COUNTER (BIT(2) | BIT(3) | BIT(4))
#define TX_HW_ATTR_RATE_POLICY (BIT(5) | BIT(6) | BIT(7) | \
BIT(8) | BIT(9))
@@ -113,30 +110,27 @@ struct wl1271_tx_hw_descr {
/* Bitwise fields - see TX_ATTR... definitions above. */
__le16 tx_attr;
/* Packet identifier used also in the Tx-Result. */
u8 id;
/* The packet TID value (as User-Priority) */
u8 tid;
- union {
- /* STA - Identifier of the remote STA in IBSS, 1 in infra-BSS */
- u8 aid;
- /* AP - host link ID (HLID) */
- u8 hlid;
- } __packed;
+ /* host link ID (HLID) */
+ u8 hlid;
u8 reserved;
} __packed;
enum wl1271_tx_hw_res_status {
TX_SUCCESS = 0,
TX_HW_ERROR = 1,
TX_DISABLED = 2,
TX_RETRY_EXCEEDED = 3,
TX_TIMEOUT = 4,
TX_KEY_NOT_FOUND = 5,
TX_PEER_NOT_FOUND = 6,
- TX_SESSION_MISMATCH = 7
+ TX_SESSION_MISMATCH = 7,
+ TX_LINK_NOT_VALID = 8,
};
struct wl1271_tx_hw_res_descr {
/* Packet Identifier - same value used in the Tx descriptor.*/
u8 id;
/* The status of the transmission, indicating success or one of
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index ab46664..93e689d 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -156,13 +156,13 @@ extern u32 wl12xx_debug_level;
*/
#define WL1271_PS_STA_MAX_BLOCKS (2 * 9)
#define WL1271_AP_BSS_INDEX 0
#define WL1271_AP_DEF_BEACON_EXP 20
-#define ACX_TX_DESCRIPTORS 32
+#define ACX_TX_DESCRIPTORS 16
#define WL1271_AGGR_BUFFER_SIZE (4 * PAGE_SIZE)
enum wl1271_state {
WL1271_STATE_OFF,
WL1271_STATE_ON,
--
1.7.6.401.g6a319
next prev parent reply other threads:[~2011-08-14 10:17 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-14 10:16 [PATCH v2 00/40] wl12xx: move to wl12xx-fw-3 Eliad Peller
2011-08-14 10:17 ` [PATCH v2 01/40] wl12xx: Revert "wl12xx: schedule TX packets according to FW occupancy" Eliad Peller
2011-08-14 10:17 ` [PATCH v2 02/40] wl12xx: Use a single fw for both STA and AP roles Eliad Peller
2011-08-14 10:17 ` [PATCH v2 03/40] wl12xx: use 1 spare block in all cases Eliad Peller
2011-08-14 10:17 ` [PATCH v2 04/40] wl12xx: temporarily disable advanced ap functions Eliad Peller
2011-08-14 10:17 ` [PATCH v2 05/40] wl12xx: remove rx filtering stuff Eliad Peller
2011-08-14 10:17 ` [PATCH v2 06/40] wl12xx: update fw status struct Eliad Peller
2011-08-14 10:17 ` [PATCH v2 07/40] wl12xx: update acx commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 08/40] wl12xx: update commands & events Eliad Peller
2011-08-14 10:17 ` [PATCH v2 09/40] wl12xx: enable/disable role on interface add/remove Eliad Peller
2011-08-14 10:17 ` [PATCH v2 10/40] wl12xx: add device role commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 11/40] wl12xx: update scan cmd api Eliad Peller
2011-08-14 10:17 ` Eliad Peller [this message]
2011-08-14 10:17 ` [PATCH v2 13/40] wl12xx: change max/default template size Eliad Peller
2011-08-14 10:17 ` [PATCH v2 14/40] wl12xx: use wl1271_acx_beacon_filter_opt for both sta and ap Eliad Peller
2011-08-14 10:17 ` [PATCH v2 15/40] wl12xx: add set_rate_mgmt_params acx Eliad Peller
2011-08-14 10:17 ` [PATCH v2 16/40] wl12xx: add system_hlid Eliad Peller
2011-08-14 10:17 ` [PATCH v2 17/40] wl12xx: add ROC/CROC commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 18/40] wl12xx: replace dummy_join with " Eliad Peller
2011-08-14 10:17 ` [PATCH v2 19/40] wl12xx: handle dummy packet event also in ap mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 20/40] wl12xx: update BT coex configuration params Eliad Peller
2011-08-14 10:17 ` [PATCH v2 21/40] wl12xx: fix session counter Eliad Peller
2011-08-14 10:17 ` [PATCH v2 22/40] wl12xx: use dynamic hlids for AP-mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 23/40] wl12xx: re-enable block ack session support Eliad Peller
2011-08-14 10:17 ` [PATCH v2 24/40] wl12xx: call wl12xx_cmd_set_peer_state() in AP mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 25/40] wl12xx: don't remove key if hlid was already deleted Eliad Peller
2011-08-14 10:17 ` [PATCH v2 26/40] wl12xx: add wl12xx_cmd_role_start_ibss() Eliad Peller
2011-08-14 10:17 ` [PATCH v2 27/40] wl12xx: support IBSS vif type Eliad Peller
2011-08-14 10:17 ` [PATCH v2 28/40] wl12xx: AP-mode - set STA HT capabilities when adding a STA Eliad Peller
2011-08-14 10:17 ` [PATCH v2 29/40] wl12xx: AP-mode - configure STA HT rates on join Eliad Peller
2011-08-14 10:17 ` [PATCH v2 30/40] wl12xx: AP-mode - configure HT rate support to the FW Eliad Peller
2011-08-14 10:17 ` [PATCH v2 31/40] wl12xx: use ap_bcast_hlid for recorded keys Eliad Peller
2011-08-14 10:17 ` [PATCH v2 32/40] wl12xx: don't remove key if hlid was already deleted Eliad Peller
2011-08-14 10:17 ` [PATCH v2 33/40] wl12xx: track freed packets in FW by AC Eliad Peller
2011-08-14 10:17 ` [PATCH v2 34/40] wl12xx: schedule TX packets according to FW packet occupancy Eliad Peller
2011-08-14 10:17 ` [PATCH v2 35/40] wl12xx: handle wrap-around overflow in released Tx blocks FW counter Eliad Peller
2011-08-14 10:17 ` [PATCH v2 36/40] wl12xx: enable AP advanced functionality Eliad Peller
2011-08-14 10:17 ` [PATCH v2 37/40] wl12xx: don't wait for disconnection event Eliad Peller
2011-08-14 10:17 ` [PATCH v2 38/40] wl12xx: set the AP-started flag only after setting keys Eliad Peller
2011-08-14 10:17 ` [PATCH v2 39/40] wl12xx: AP-mode - prevent Tx to stale/invalid stations Eliad Peller
2011-08-14 10:17 ` [PATCH v2 40/40] wl12xx: fix tx_queue_count spurious increment Eliad Peller
2011-08-22 11:11 ` [PATCH v2 00/40] wl12xx: move to wl12xx-fw-3 Luciano Coelho
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1313317059-16567-13-git-send-email-eliad@wizery.com \
--to=eliad@wizery.com \
--cc=coelho@ti.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox