From: Eliad Peller <eliad@wizery.com>
To: Luciano Coelho <coelho@ti.com>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH v2 15/40] wl12xx: add set_rate_mgmt_params acx
Date: Sun, 14 Aug 2011 13:17:14 +0300 [thread overview]
Message-ID: <1313317059-16567-16-git-send-email-eliad@wizery.com> (raw)
In-Reply-To: <1313317059-16567-1-git-send-email-eliad@wizery.com>
Configure rate management parameters on hw init
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
v2: remove BUILD_BUG_ON, fix typos, reorder conf struct.
drivers/net/wireless/wl12xx/acx.c | 42 ++++++++++++++++++++++++++++++++++++
drivers/net/wireless/wl12xx/acx.h | 25 +++++++++++++++++++++
drivers/net/wireless/wl12xx/conf.h | 20 +++++++++++++++++
drivers/net/wireless/wl12xx/init.c | 4 +++
drivers/net/wireless/wl12xx/main.c | 21 ++++++++++++++++++
5 files changed, 112 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c
index 968d219..a784ba6 100644
--- a/drivers/net/wireless/wl12xx/acx.c
+++ b/drivers/net/wireless/wl12xx/acx.c
@@ -1696,6 +1696,48 @@ int wl1271_acx_fm_coex(struct wl1271 *wl)
}
out:
kfree(acx);
return ret;
}
+
+int wl12xx_acx_set_rate_mgmt_params(struct wl1271 *wl)
+{
+ struct wl12xx_acx_set_rate_mgmt_params *acx = NULL;
+ struct conf_rate_policy_settings *conf = &wl->conf.rate;
+ int ret;
+
+ wl1271_debug(DEBUG_ACX, "acx set rate mgmt params");
+
+ acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+ if (!acx)
+ return -ENOMEM;
+
+ acx->index = ACX_RATE_MGMT_ALL_PARAMS;
+ acx->rate_retry_score = cpu_to_le16(conf->rate_retry_score);
+ acx->per_add = cpu_to_le16(conf->per_add);
+ acx->per_th1 = cpu_to_le16(conf->per_th1);
+ acx->per_th2 = cpu_to_le16(conf->per_th2);
+ acx->max_per = cpu_to_le16(conf->max_per);
+ acx->inverse_curiosity_factor = conf->inverse_curiosity_factor;
+ acx->tx_fail_low_th = conf->tx_fail_low_th;
+ acx->tx_fail_high_th = conf->tx_fail_high_th;
+ acx->per_alpha_shift = conf->per_alpha_shift;
+ acx->per_add_shift = conf->per_add_shift;
+ acx->per_beta1_shift = conf->per_beta1_shift;
+ acx->per_beta2_shift = conf->per_beta2_shift;
+ acx->rate_check_up = conf->rate_check_up;
+ acx->rate_check_down = conf->rate_check_down;
+ memcpy(acx->rate_retry_policy, conf->rate_retry_policy,
+ sizeof(acx->rate_retry_policy));
+
+ ret = wl1271_cmd_configure(wl, ACX_SET_RATE_MGMT_PARAMS,
+ acx, sizeof(*acx));
+ if (ret < 0) {
+ wl1271_warning("acx set rate mgmt params failed: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(acx);
+ return ret;
+}
diff --git a/drivers/net/wireless/wl12xx/acx.h b/drivers/net/wireless/wl12xx/acx.h
index 3aec410..6909bc5 100644
--- a/drivers/net/wireless/wl12xx/acx.h
+++ b/drivers/net/wireless/wl12xx/acx.h
@@ -1152,12 +1152,36 @@ struct wl1271_acx_fm_coex {
* The swallow clock difference of the swallowing mechanism.
* 0xFF = use FW default
*/
u8 swallow_clk_diff;
} __packed;
+#define ACX_RATE_MGMT_ALL_PARAMS 0xff
+struct wl12xx_acx_set_rate_mgmt_params {
+ struct acx_header header;
+
+ u8 index; /* 0xff to configure all params */
+ u8 padding1;
+ __le16 rate_retry_score;
+ __le16 per_add;
+ __le16 per_th1;
+ __le16 per_th2;
+ __le16 max_per;
+ u8 inverse_curiosity_factor;
+ u8 tx_fail_low_th;
+ u8 tx_fail_high_th;
+ u8 per_alpha_shift;
+ u8 per_add_shift;
+ u8 per_beta1_shift;
+ u8 per_beta2_shift;
+ u8 rate_check_up;
+ u8 rate_check_down;
+ u8 rate_retry_policy[ACX_RATE_MGMT_NUM_OF_RATES];
+ u8 padding2[2];
+} __packed;
+
enum {
ACX_WAKE_UP_CONDITIONS = 0x0002,
ACX_MEM_CFG = 0x0003,
ACX_SLOT = 0x0004,
ACX_AC_CFG = 0x0007,
ACX_MEM_MAP = 0x0008,
@@ -1291,8 +1315,9 @@ int wl1271_acx_set_ba_receiver_session(struct wl1271 *wl, u8 tid_index, u16 ssn,
int wl1271_acx_tsf_info(struct wl1271 *wl, u64 *mactime);
int wl1271_acx_ps_rx_streaming(struct wl1271 *wl, bool enable);
int wl1271_acx_ap_max_tx_retry(struct wl1271 *wl);
int wl1271_acx_config_ps(struct wl1271 *wl);
int wl1271_acx_set_inconnection_sta(struct wl1271 *wl, u8 *addr);
int wl1271_acx_fm_coex(struct wl1271 *wl);
+int wl12xx_acx_set_rate_mgmt_params(struct wl1271 *wl);
#endif /* __WL1271_ACX_H__ */
diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h
index 6080e01..30ee7d3 100644
--- a/drivers/net/wireless/wl12xx/conf.h
+++ b/drivers/net/wireless/wl12xx/conf.h
@@ -1306,12 +1306,31 @@ struct conf_fwlog {
u8 output;
/* Regulates the frequency of log messages */
u8 threshold;
};
+#define ACX_RATE_MGMT_NUM_OF_RATES 13
+struct conf_rate_policy_settings {
+ u16 rate_retry_score;
+ u16 per_add;
+ u16 per_th1;
+ u16 per_th2;
+ u16 max_per;
+ u8 inverse_curiosity_factor;
+ u8 tx_fail_low_th;
+ u8 tx_fail_high_th;
+ u8 per_alpha_shift;
+ u8 per_add_shift;
+ u8 per_beta1_shift;
+ u8 per_beta2_shift;
+ u8 rate_check_up;
+ u8 rate_check_down;
+ u8 rate_retry_policy[ACX_RATE_MGMT_NUM_OF_RATES];
+};
+
struct conf_drv_settings {
struct conf_sg_settings sg;
struct conf_rx_settings rx;
struct conf_tx_settings tx;
struct conf_conn_settings conn;
struct conf_itrim_settings itrim;
@@ -1323,10 +1342,11 @@ struct conf_drv_settings {
struct conf_ht_setting ht;
struct conf_memory_settings mem_wl127x;
struct conf_memory_settings mem_wl128x;
struct conf_fm_coex fm_coex;
struct conf_rx_streaming_settings rx_streaming;
struct conf_fwlog fwlog;
+ struct conf_rate_policy_settings rate;
u8 hci_io_ds;
};
#endif
diff --git a/drivers/net/wireless/wl12xx/init.c b/drivers/net/wireless/wl12xx/init.c
index 3a66609..1bc246f 100644
--- a/drivers/net/wireless/wl12xx/init.c
+++ b/drivers/net/wireless/wl12xx/init.c
@@ -712,12 +712,16 @@ int wl1271_hw_init(struct wl1271 *wl)
else
ret = wl1271_sta_hw_init_post_mem(wl);
if (ret < 0)
goto out_free_memmap;
+ ret = wl12xx_acx_set_rate_mgmt_params(wl);
+ if (ret < 0)
+ goto out_free_memmap;
+
/* Configure initiator BA sessions policies */
ret = wl1271_set_ba_policies(wl);
if (ret < 0)
goto out_free_memmap;
return 0;
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index d683bca..3db191d 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -376,12 +376,33 @@ static struct conf_drv_settings default_conf = {
.severity = 0,
.timestamp = WL12XX_FWLOG_TIMESTAMP_DISABLED,
.output = WL12XX_FWLOG_OUTPUT_HOST,
.threshold = 0,
},
.hci_io_ds = HCI_IO_DS_6MA,
+ .rate = {
+ .rate_retry_score = 32000,
+ .per_add = 8192,
+ .per_th1 = 2048,
+ .per_th2 = 4096,
+ .max_per = 8100,
+ .inverse_curiosity_factor = 5,
+ .tx_fail_low_th = 4,
+ .tx_fail_high_th = 10,
+ .per_alpha_shift = 4,
+ .per_add_shift = 13,
+ .per_beta1_shift = 10,
+ .per_beta2_shift = 8,
+ .rate_check_up = 2,
+ .rate_check_down = 12,
+ .rate_retry_policy = {
+ 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00,
+ },
+ },
};
static char *fwlog_param;
static void __wl1271_op_remove_interface(struct wl1271 *wl,
bool reset_tx_queues);
--
1.7.6.401.g6a319
next prev parent reply other threads:[~2011-08-14 10:17 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-14 10:16 [PATCH v2 00/40] wl12xx: move to wl12xx-fw-3 Eliad Peller
2011-08-14 10:17 ` [PATCH v2 01/40] wl12xx: Revert "wl12xx: schedule TX packets according to FW occupancy" Eliad Peller
2011-08-14 10:17 ` [PATCH v2 02/40] wl12xx: Use a single fw for both STA and AP roles Eliad Peller
2011-08-14 10:17 ` [PATCH v2 03/40] wl12xx: use 1 spare block in all cases Eliad Peller
2011-08-14 10:17 ` [PATCH v2 04/40] wl12xx: temporarily disable advanced ap functions Eliad Peller
2011-08-14 10:17 ` [PATCH v2 05/40] wl12xx: remove rx filtering stuff Eliad Peller
2011-08-14 10:17 ` [PATCH v2 06/40] wl12xx: update fw status struct Eliad Peller
2011-08-14 10:17 ` [PATCH v2 07/40] wl12xx: update acx commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 08/40] wl12xx: update commands & events Eliad Peller
2011-08-14 10:17 ` [PATCH v2 09/40] wl12xx: enable/disable role on interface add/remove Eliad Peller
2011-08-14 10:17 ` [PATCH v2 10/40] wl12xx: add device role commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 11/40] wl12xx: update scan cmd api Eliad Peller
2011-08-14 10:17 ` [PATCH v2 12/40] wl12xx: update rx/tx Eliad Peller
2011-08-14 10:17 ` [PATCH v2 13/40] wl12xx: change max/default template size Eliad Peller
2011-08-14 10:17 ` [PATCH v2 14/40] wl12xx: use wl1271_acx_beacon_filter_opt for both sta and ap Eliad Peller
2011-08-14 10:17 ` Eliad Peller [this message]
2011-08-14 10:17 ` [PATCH v2 16/40] wl12xx: add system_hlid Eliad Peller
2011-08-14 10:17 ` [PATCH v2 17/40] wl12xx: add ROC/CROC commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 18/40] wl12xx: replace dummy_join with " Eliad Peller
2011-08-14 10:17 ` [PATCH v2 19/40] wl12xx: handle dummy packet event also in ap mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 20/40] wl12xx: update BT coex configuration params Eliad Peller
2011-08-14 10:17 ` [PATCH v2 21/40] wl12xx: fix session counter Eliad Peller
2011-08-14 10:17 ` [PATCH v2 22/40] wl12xx: use dynamic hlids for AP-mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 23/40] wl12xx: re-enable block ack session support Eliad Peller
2011-08-14 10:17 ` [PATCH v2 24/40] wl12xx: call wl12xx_cmd_set_peer_state() in AP mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 25/40] wl12xx: don't remove key if hlid was already deleted Eliad Peller
2011-08-14 10:17 ` [PATCH v2 26/40] wl12xx: add wl12xx_cmd_role_start_ibss() Eliad Peller
2011-08-14 10:17 ` [PATCH v2 27/40] wl12xx: support IBSS vif type Eliad Peller
2011-08-14 10:17 ` [PATCH v2 28/40] wl12xx: AP-mode - set STA HT capabilities when adding a STA Eliad Peller
2011-08-14 10:17 ` [PATCH v2 29/40] wl12xx: AP-mode - configure STA HT rates on join Eliad Peller
2011-08-14 10:17 ` [PATCH v2 30/40] wl12xx: AP-mode - configure HT rate support to the FW Eliad Peller
2011-08-14 10:17 ` [PATCH v2 31/40] wl12xx: use ap_bcast_hlid for recorded keys Eliad Peller
2011-08-14 10:17 ` [PATCH v2 32/40] wl12xx: don't remove key if hlid was already deleted Eliad Peller
2011-08-14 10:17 ` [PATCH v2 33/40] wl12xx: track freed packets in FW by AC Eliad Peller
2011-08-14 10:17 ` [PATCH v2 34/40] wl12xx: schedule TX packets according to FW packet occupancy Eliad Peller
2011-08-14 10:17 ` [PATCH v2 35/40] wl12xx: handle wrap-around overflow in released Tx blocks FW counter Eliad Peller
2011-08-14 10:17 ` [PATCH v2 36/40] wl12xx: enable AP advanced functionality Eliad Peller
2011-08-14 10:17 ` [PATCH v2 37/40] wl12xx: don't wait for disconnection event Eliad Peller
2011-08-14 10:17 ` [PATCH v2 38/40] wl12xx: set the AP-started flag only after setting keys Eliad Peller
2011-08-14 10:17 ` [PATCH v2 39/40] wl12xx: AP-mode - prevent Tx to stale/invalid stations Eliad Peller
2011-08-14 10:17 ` [PATCH v2 40/40] wl12xx: fix tx_queue_count spurious increment Eliad Peller
2011-08-22 11:11 ` [PATCH v2 00/40] wl12xx: move to wl12xx-fw-3 Luciano Coelho
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1313317059-16567-16-git-send-email-eliad@wizery.com \
--to=eliad@wizery.com \
--cc=coelho@ti.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).