Linux wireless drivers development
 help / color / mirror / Atom feed
From: Eliad Peller <eliad@wizery.com>
To: Luciano Coelho <coelho@ti.com>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH v2 21/40] wl12xx: fix session counter
Date: Sun, 14 Aug 2011 13:17:20 +0300	[thread overview]
Message-ID: <1313317059-16567-22-git-send-email-eliad@wizery.com> (raw)
In-Reply-To: <1313317059-16567-1-git-send-email-eliad@wizery.com>

From: Arik Nemtsov <arik@wizery.com>

Increment the session counter on every
wl12xx_cmd_role_start_sta() command.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
v2: fix commit msg

 drivers/net/wireless/wl12xx/cmd.c  |   12 +++++++++++-
 drivers/net/wireless/wl12xx/main.c |    6 +-----
 2 files changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/wl12xx/cmd.c b/drivers/net/wireless/wl12xx/cmd.c
index c620a9d..7c5d738 100644
--- a/drivers/net/wireless/wl12xx/cmd.c
+++ b/drivers/net/wireless/wl12xx/cmd.c
@@ -455,12 +455,22 @@ static void wl12xx_free_link(struct wl1271 *wl, u8 *hlid)
 		return;
 
 	__clear_bit(*hlid, wl->links_map);
 	*hlid = WL12XX_INVALID_LINK_ID;
 }
 
+static int wl12xx_get_new_session_id(struct wl1271 *wl)
+{
+	if (wl->session_counter >= SESSION_COUNTER_MAX)
+		wl->session_counter = 0;
+
+	wl->session_counter++;
+
+	return wl->session_counter;
+}
+
 int wl12xx_cmd_role_start_dev(struct wl1271 *wl)
 {
 	struct wl12xx_cmd_role_start *cmd;
 	int ret;
 
 	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
@@ -577,13 +587,13 @@ int wl12xx_cmd_role_start_sta(struct wl1271 *wl)
 	if (wl->sta_hlid == WL12XX_INVALID_LINK_ID) {
 		ret = wl12xx_allocate_link(wl, &wl->sta_hlid);
 		if (ret)
 			goto out_free;
 	}
 	cmd->sta.hlid = wl->sta_hlid;
-	cmd->sta.session = wl->session_counter;
+	cmd->sta.session = wl12xx_get_new_session_id(wl);
 	cmd->sta.remote_rates = cpu_to_le32(wl->rate_set);
 
 	wl1271_debug(DEBUG_CMD, "role start: roleid=%d, hlid=%d, session=%d "
 		     "basic_rate_set: 0x%x, remote_rates: 0x%x",
 		     wl->role_id, cmd->sta.hlid, cmd->sta.session,
 		     wl->basic_rate_set, wl->rate_set);
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 1774a66..157c462 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -2184,17 +2184,12 @@ static int wl1271_sta_handle_idle(struct wl1271 *wl, bool idle)
 			wl, CMD_TEMPL_KLV_IDX_NULL_DATA,
 			ACX_KEEP_ALIVE_TPL_INVALID);
 		if (ret < 0)
 			goto out;
 		set_bit(WL1271_FLAG_IDLE, &wl->flags);
 	} else {
-		/* increment the session counter */
-		wl->session_counter++;
-		if (wl->session_counter >= SESSION_COUNTER_MAX)
-			wl->session_counter = 0;
-
 		/* The current firmware only supports sched_scan in idle */
 		if (wl->sched_scanning) {
 			wl1271_scan_sched_scan_stop(wl);
 			ieee80211_sched_scan_stopped(wl->hw);
 		}
 
@@ -4450,12 +4445,13 @@ struct ieee80211_hw *wl1271_alloc_hw(void)
 	wl->tx_security_last_seq_lsb = 0;
 	wl->role_id = WL12XX_INVALID_ROLE_ID;
 	wl->system_hlid = WL12XX_SYSTEM_HLID;
 	wl->sta_hlid = WL12XX_INVALID_LINK_ID;
 	wl->dev_role_id = WL12XX_INVALID_ROLE_ID;
 	wl->dev_hlid = WL12XX_INVALID_LINK_ID;
+	wl->session_counter = 0;
 	setup_timer(&wl->rx_streaming_timer, wl1271_rx_streaming_timer,
 		    (unsigned long) wl);
 	wl->fwlog_size = 0;
 	init_waitqueue_head(&wl->fwlog_waitq);
 
 	/* The system link is always allocated */
-- 
1.7.6.401.g6a319


  parent reply	other threads:[~2011-08-14 10:17 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-08-14 10:16 [PATCH v2 00/40] wl12xx: move to wl12xx-fw-3 Eliad Peller
2011-08-14 10:17 ` [PATCH v2 01/40] wl12xx: Revert "wl12xx: schedule TX packets according to FW occupancy" Eliad Peller
2011-08-14 10:17 ` [PATCH v2 02/40] wl12xx: Use a single fw for both STA and AP roles Eliad Peller
2011-08-14 10:17 ` [PATCH v2 03/40] wl12xx: use 1 spare block in all cases Eliad Peller
2011-08-14 10:17 ` [PATCH v2 04/40] wl12xx: temporarily disable advanced ap functions Eliad Peller
2011-08-14 10:17 ` [PATCH v2 05/40] wl12xx: remove rx filtering stuff Eliad Peller
2011-08-14 10:17 ` [PATCH v2 06/40] wl12xx: update fw status struct Eliad Peller
2011-08-14 10:17 ` [PATCH v2 07/40] wl12xx: update acx commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 08/40] wl12xx: update commands & events Eliad Peller
2011-08-14 10:17 ` [PATCH v2 09/40] wl12xx: enable/disable role on interface add/remove Eliad Peller
2011-08-14 10:17 ` [PATCH v2 10/40] wl12xx: add device role commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 11/40] wl12xx: update scan cmd api Eliad Peller
2011-08-14 10:17 ` [PATCH v2 12/40] wl12xx: update rx/tx Eliad Peller
2011-08-14 10:17 ` [PATCH v2 13/40] wl12xx: change max/default template size Eliad Peller
2011-08-14 10:17 ` [PATCH v2 14/40] wl12xx: use wl1271_acx_beacon_filter_opt for both sta and ap Eliad Peller
2011-08-14 10:17 ` [PATCH v2 15/40] wl12xx: add set_rate_mgmt_params acx Eliad Peller
2011-08-14 10:17 ` [PATCH v2 16/40] wl12xx: add system_hlid Eliad Peller
2011-08-14 10:17 ` [PATCH v2 17/40] wl12xx: add ROC/CROC commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 18/40] wl12xx: replace dummy_join with " Eliad Peller
2011-08-14 10:17 ` [PATCH v2 19/40] wl12xx: handle dummy packet event also in ap mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 20/40] wl12xx: update BT coex configuration params Eliad Peller
2011-08-14 10:17 ` Eliad Peller [this message]
2011-08-14 10:17 ` [PATCH v2 22/40] wl12xx: use dynamic hlids for AP-mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 23/40] wl12xx: re-enable block ack session support Eliad Peller
2011-08-14 10:17 ` [PATCH v2 24/40] wl12xx: call wl12xx_cmd_set_peer_state() in AP mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 25/40] wl12xx: don't remove key if hlid was already deleted Eliad Peller
2011-08-14 10:17 ` [PATCH v2 26/40] wl12xx: add wl12xx_cmd_role_start_ibss() Eliad Peller
2011-08-14 10:17 ` [PATCH v2 27/40] wl12xx: support IBSS vif type Eliad Peller
2011-08-14 10:17 ` [PATCH v2 28/40] wl12xx: AP-mode - set STA HT capabilities when adding a STA Eliad Peller
2011-08-14 10:17 ` [PATCH v2 29/40] wl12xx: AP-mode - configure STA HT rates on join Eliad Peller
2011-08-14 10:17 ` [PATCH v2 30/40] wl12xx: AP-mode - configure HT rate support to the FW Eliad Peller
2011-08-14 10:17 ` [PATCH v2 31/40] wl12xx: use ap_bcast_hlid for recorded keys Eliad Peller
2011-08-14 10:17 ` [PATCH v2 32/40] wl12xx: don't remove key if hlid was already deleted Eliad Peller
2011-08-14 10:17 ` [PATCH v2 33/40] wl12xx: track freed packets in FW by AC Eliad Peller
2011-08-14 10:17 ` [PATCH v2 34/40] wl12xx: schedule TX packets according to FW packet occupancy Eliad Peller
2011-08-14 10:17 ` [PATCH v2 35/40] wl12xx: handle wrap-around overflow in released Tx blocks FW counter Eliad Peller
2011-08-14 10:17 ` [PATCH v2 36/40] wl12xx: enable AP advanced functionality Eliad Peller
2011-08-14 10:17 ` [PATCH v2 37/40] wl12xx: don't wait for disconnection event Eliad Peller
2011-08-14 10:17 ` [PATCH v2 38/40] wl12xx: set the AP-started flag only after setting keys Eliad Peller
2011-08-14 10:17 ` [PATCH v2 39/40] wl12xx: AP-mode - prevent Tx to stale/invalid stations Eliad Peller
2011-08-14 10:17 ` [PATCH v2 40/40] wl12xx: fix tx_queue_count spurious increment Eliad Peller
2011-08-22 11:11 ` [PATCH v2 00/40] wl12xx: move to wl12xx-fw-3 Luciano Coelho

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1313317059-16567-22-git-send-email-eliad@wizery.com \
    --to=eliad@wizery.com \
    --cc=coelho@ti.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox