From: Eugeni Dodonov <eugeni.dodonov@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Eugeni Dodonov <eugeni.dodonov@intel.com>
Subject: [PATCH 17/24] drm/i915: disable pipe DDI function when disabling pipe
Date: Thu, 26 Apr 2012 15:21:12 -0300 [thread overview]
Message-ID: <1335464479-648-18-git-send-email-eugeni.dodonov@intel.com> (raw)
In-Reply-To: <1335464479-648-1-git-send-email-eugeni.dodonov@intel.com>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
---
drivers/gpu/drm/i915/intel_display.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 5be2ff1..b7e50af 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1627,6 +1627,16 @@ static void intel_disable_pipe(struct drm_i915_private *dev_priv,
I915_WRITE(reg, val & ~PIPECONF_ENABLE);
intel_wait_for_pipe_off(dev_priv->dev, pipe);
+
+ /* On HSW, disable pipe DDI function the pipe */
+ if (IS_HASWELL(dev_priv->dev)) {
+ val = I915_READ(DDI_FUNC_CTL(pipe));
+ val &= ~PIPE_DDI_PORT_MASK;
+ val &= ~PIPE_DDI_FUNC_ENABLE;
+ I915_WRITE(DDI_FUNC_CTL(pipe),
+ val);
+ }
+
}
/*
--
1.7.10
next prev parent reply other threads:[~2012-04-26 18:22 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-26 18:20 [PATCH 00/24] Haswell v4 Eugeni Dodonov
2012-04-26 18:20 ` [PATCH 01/24] drm/i915: add Haswell DIP controls registers Eugeni Dodonov
2012-04-26 19:18 ` Daniel Vetter
2012-04-30 23:46 ` Jesse Barnes
2012-04-26 18:20 ` [PATCH 02/24] drm/i915: support infoframes on Haswell Eugeni Dodonov
2012-04-26 18:20 ` [PATCH 03/24] drm/i915: add support for SBI ops Eugeni Dodonov
2012-04-30 23:53 ` Jesse Barnes
2012-04-26 18:20 ` [PATCH 04/24] drm/i915: calculate same watermarks on Haswell as on Ivy Bridge Eugeni Dodonov
2012-04-26 18:31 ` Jesse Barnes
2012-04-26 18:51 ` Eugeni Dodonov
2012-04-30 23:54 ` Jesse Barnes
2012-04-26 18:21 ` [PATCH 05/24] drm/i915: reuse Ivybridge interrupts code for Haswell Eugeni Dodonov
2012-04-30 23:55 ` Jesse Barnes
2012-04-26 18:21 ` [PATCH 06/24] drm/i915: properly check for pipe count Eugeni Dodonov
2012-04-30 23:57 ` Jesse Barnes
2012-04-26 18:21 ` [PATCH 07/24] drm/i915: show unknown sdvox registers on hdmi init Eugeni Dodonov
2012-04-30 23:58 ` Jesse Barnes
2012-04-26 18:21 ` [PATCH 08/24] drm/i915: do not use fdi_normal_train on haswell Eugeni Dodonov
2012-04-30 23:59 ` Jesse Barnes
2012-04-26 18:21 ` [PATCH 09/24] drm/i915: detect PCH encoders on Haswell Eugeni Dodonov
2012-05-01 0:00 ` Jesse Barnes
2012-04-26 18:21 ` [PATCH 10/24] drm/i915: enable power wells on haswell init Eugeni Dodonov
2012-05-01 0:05 ` Jesse Barnes
2012-04-26 18:21 ` [PATCH 11/24] drm/i915: program WM_LINETIME on Haswell Eugeni Dodonov
2012-05-01 0:05 ` Jesse Barnes
2012-04-26 18:21 ` [PATCH 12/24] drm/i915: add LPT PCH checks Eugeni Dodonov
2012-05-01 0:06 ` Jesse Barnes
2012-04-26 18:21 ` [PATCH 13/24] drm/i915: handle DDI-related assertions Eugeni Dodonov
2012-05-01 0:07 ` Jesse Barnes
2012-04-26 18:21 ` [PATCH 14/24] drm/i915: account for only one PCH receiver on Haswell Eugeni Dodonov
2012-04-26 19:54 ` Daniel Vetter
2012-05-01 0:09 ` Jesse Barnes
2012-04-26 18:21 ` [PATCH 15/24] drm/i915: initialize DDI buffer translations Eugeni Dodonov
2012-04-26 19:16 ` Eugeni Dodonov
2012-05-01 0:20 ` Jesse Barnes
2012-05-01 0:27 ` Eugeni Dodonov
2012-04-26 18:21 ` [PATCH 16/24] drm/i915: support DDI training in FDI mode Eugeni Dodonov
2012-04-26 19:43 ` Daniel Vetter
2012-04-26 18:21 ` Eugeni Dodonov [this message]
2012-05-01 0:23 ` [PATCH 17/24] drm/i915: disable pipe DDI function when disabling pipe Jesse Barnes
2012-04-26 18:21 ` [PATCH 18/24] drm/i915: program iCLKIP on Lynx Point Eugeni Dodonov
2012-05-01 0:26 ` Jesse Barnes
2012-04-26 18:21 ` [PATCH 19/24] drm/i915: detect digital outputs on Haswell Eugeni Dodonov
2012-05-01 0:27 ` Jesse Barnes
2012-05-01 0:33 ` Eugeni Dodonov
2012-05-01 15:01 ` Jesse Barnes
2012-05-02 3:02 ` Keith Packard
2012-04-26 18:21 ` [PATCH 20/24] drm/i915: add support for DDI-controlled digital outputs Eugeni Dodonov
2012-05-01 0:28 ` Jesse Barnes
2012-04-26 18:21 ` [PATCH 21/24] drm/i915: add WR PLL programming table Eugeni Dodonov
2012-04-26 18:21 ` [PATCH 22/24] drm/i915: move HDMI structs to shared location Eugeni Dodonov
2012-05-01 0:29 ` Jesse Barnes
2012-04-26 18:21 ` [PATCH 23/24] drm/i915: prepare HDMI link for Haswell Eugeni Dodonov
2012-04-26 18:21 ` [PATCH 24/24] drm/i915: hook Haswell devices in place Eugeni Dodonov
2012-04-26 19:33 ` [PATCH 01/24] drm/i915: add Haswell DIP controls registers Eugeni Dodonov
2012-04-26 19:33 ` [PATCH 02/24] drm/i915: support infoframes on Haswell Eugeni Dodonov
2012-04-26 19:42 ` [PATCH 01/24] drm/i915: add Haswell DIP controls registers Eugeni Dodonov
2012-04-30 23:50 ` Jesse Barnes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1335464479-648-18-git-send-email-eugeni.dodonov@intel.com \
--to=eugeni.dodonov@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox