From: Paulo Zanoni <przanoni@gmail.com>
To: intel-gfx@lists.freedesktop.org
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: [PATCH 32/47] drm/i915: convert pipe timing definitions to transcoder
Date: Tue, 2 Oct 2012 17:52:07 -0300 [thread overview]
Message-ID: <1349211142-4802-33-git-send-email-przanoni@gmail.com> (raw)
In-Reply-To: <1349211142-4802-1-git-send-email-przanoni@gmail.com>
From: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
---
drivers/gpu/drm/i915/i915_irq.c | 7 +++--
drivers/gpu/drm/i915/i915_reg.h | 14 +++++-----
drivers/gpu/drm/i915/intel_crt.c | 6 ++--
drivers/gpu/drm/i915/intel_display.c | 51 +++++++++++++++++-----------------
4 files changed, 40 insertions(+), 38 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 024b08d..09b3551 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -185,6 +185,7 @@ static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe,
int vbl_start, vbl_end, htotal, vtotal;
bool in_vbl = true;
int ret = 0;
+ enum transcoder transcoder = pipe_to_transcoder(dev_priv, pipe);
if (!i915_pipe_enabled(dev, pipe)) {
DRM_DEBUG_DRIVER("trying to get scanoutpos for disabled "
@@ -193,7 +194,7 @@ static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe,
}
/* Get vtotal. */
- vtotal = 1 + ((I915_READ(VTOTAL(pipe)) >> 16) & 0x1fff);
+ vtotal = 1 + ((I915_READ(VTOTAL(transcoder)) >> 16) & 0x1fff);
if (INTEL_INFO(dev)->gen >= 4) {
/* No obvious pixelcount register. Only query vertical
@@ -213,13 +214,13 @@ static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe,
*/
position = (I915_READ(PIPEFRAMEPIXEL(pipe)) & PIPE_PIXEL_MASK) >> PIPE_PIXEL_SHIFT;
- htotal = 1 + ((I915_READ(HTOTAL(pipe)) >> 16) & 0x1fff);
+ htotal = 1 + ((I915_READ(HTOTAL(transcoder)) >> 16) & 0x1fff);
*vpos = position / htotal;
*hpos = position - (*vpos * htotal);
}
/* Query vblank area. */
- vbl = I915_READ(VBLANK(pipe));
+ vbl = I915_READ(VBLANK(transcoder));
/* Test position against vblank region. */
vbl_start = vbl & 0x1fff;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 4715754..3b91031 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1561,14 +1561,14 @@
#define _VSYNCSHIFT_B 0x61028
-#define HTOTAL(pipe) _PIPE(pipe, _HTOTAL_A, _HTOTAL_B)
-#define HBLANK(pipe) _PIPE(pipe, _HBLANK_A, _HBLANK_B)
-#define HSYNC(pipe) _PIPE(pipe, _HSYNC_A, _HSYNC_B)
-#define VTOTAL(pipe) _PIPE(pipe, _VTOTAL_A, _VTOTAL_B)
-#define VBLANK(pipe) _PIPE(pipe, _VBLANK_A, _VBLANK_B)
-#define VSYNC(pipe) _PIPE(pipe, _VSYNC_A, _VSYNC_B)
+#define HTOTAL(trans) _TRANSCODER(trans, _HTOTAL_A, _HTOTAL_B)
+#define HBLANK(trans) _TRANSCODER(trans, _HBLANK_A, _HBLANK_B)
+#define HSYNC(trans) _TRANSCODER(trans, _HSYNC_A, _HSYNC_B)
+#define VTOTAL(trans) _TRANSCODER(trans, _VTOTAL_A, _VTOTAL_B)
+#define VBLANK(trans) _TRANSCODER(trans, _VBLANK_A, _VBLANK_B)
+#define VSYNC(trans) _TRANSCODER(trans, _VSYNC_A, _VSYNC_B)
#define BCLRPAT(pipe) _PIPE(pipe, _BCLRPAT_A, _BCLRPAT_B)
-#define VSYNCSHIFT(pipe) _PIPE(pipe, _VSYNCSHIFT_A, _VSYNCSHIFT_B)
+#define VSYNCSHIFT(trans) _TRANSCODER(trans, _VSYNCSHIFT_A, _VSYNCSHIFT_B)
/* VGA port control */
#define ADPA 0x61100
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index bc2a91f..4f32ea9 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -484,9 +484,9 @@ intel_crt_load_detect(struct intel_crt *crt)
DRM_DEBUG_KMS("starting load-detect on CRT\n");
bclrpat_reg = BCLRPAT(pipe);
- vtotal_reg = VTOTAL(pipe);
- vblank_reg = VBLANK(pipe);
- vsync_reg = VSYNC(pipe);
+ vtotal_reg = VTOTAL(transcoder);
+ vblank_reg = VBLANK(transcoder);
+ vsync_reg = VSYNC(transcoder);
pipeconf_reg = PIPECONF(transcoder);
pipe_dsl_reg = PIPEDSL(pipe);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index aa5cc84..15b2a4f 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3019,14 +3019,14 @@ static void ironlake_pch_enable(struct drm_crtc *crtc)
/* set transcoder timing, panel must allow it */
assert_panel_unlocked(dev_priv, pipe);
- I915_WRITE(TRANS_HTOTAL(pipe), I915_READ(HTOTAL(pipe)));
- I915_WRITE(TRANS_HBLANK(pipe), I915_READ(HBLANK(pipe)));
- I915_WRITE(TRANS_HSYNC(pipe), I915_READ(HSYNC(pipe)));
+ I915_WRITE(TRANS_HTOTAL(pipe), I915_READ(HTOTAL(transcoder)));
+ I915_WRITE(TRANS_HBLANK(pipe), I915_READ(HBLANK(transcoder)));
+ I915_WRITE(TRANS_HSYNC(pipe), I915_READ(HSYNC(transcoder)));
- I915_WRITE(TRANS_VTOTAL(pipe), I915_READ(VTOTAL(pipe)));
- I915_WRITE(TRANS_VBLANK(pipe), I915_READ(VBLANK(pipe)));
- I915_WRITE(TRANS_VSYNC(pipe), I915_READ(VSYNC(pipe)));
- I915_WRITE(TRANS_VSYNCSHIFT(pipe), I915_READ(VSYNCSHIFT(pipe)));
+ I915_WRITE(TRANS_VTOTAL(pipe), I915_READ(VTOTAL(transcoder)));
+ I915_WRITE(TRANS_VBLANK(pipe), I915_READ(VBLANK(transcoder)));
+ I915_WRITE(TRANS_VSYNC(pipe), I915_READ(VSYNC(transcoder)));
+ I915_WRITE(TRANS_VSYNCSHIFT(pipe), I915_READ(VSYNCSHIFT(transcoder)));
if (!IS_HASWELL(dev))
intel_fdi_normal_train(crtc);
@@ -4338,6 +4338,7 @@ static void intel_set_pipe_timings(struct intel_crtc *intel_crtc,
struct drm_device *dev = intel_crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
enum pipe pipe = intel_crtc->pipe;
+ enum transcoder transcoder = intel_crtc->transcoder;
uint32_t vsyncshift;
if (!IS_GEN2(dev) && adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
@@ -4351,25 +4352,25 @@ static void intel_set_pipe_timings(struct intel_crtc *intel_crtc,
}
if (INTEL_INFO(dev)->gen > 3)
- I915_WRITE(VSYNCSHIFT(pipe), vsyncshift);
+ I915_WRITE(VSYNCSHIFT(transcoder), vsyncshift);
- I915_WRITE(HTOTAL(pipe),
+ I915_WRITE(HTOTAL(transcoder),
(adjusted_mode->crtc_hdisplay - 1) |
((adjusted_mode->crtc_htotal - 1) << 16));
- I915_WRITE(HBLANK(pipe),
+ I915_WRITE(HBLANK(transcoder),
(adjusted_mode->crtc_hblank_start - 1) |
((adjusted_mode->crtc_hblank_end - 1) << 16));
- I915_WRITE(HSYNC(pipe),
+ I915_WRITE(HSYNC(transcoder),
(adjusted_mode->crtc_hsync_start - 1) |
((adjusted_mode->crtc_hsync_end - 1) << 16));
- I915_WRITE(VTOTAL(pipe),
+ I915_WRITE(VTOTAL(transcoder),
(adjusted_mode->crtc_vdisplay - 1) |
((adjusted_mode->crtc_vtotal - 1) << 16));
- I915_WRITE(VBLANK(pipe),
+ I915_WRITE(VBLANK(transcoder),
(adjusted_mode->crtc_vblank_start - 1) |
((adjusted_mode->crtc_vblank_end - 1) << 16));
- I915_WRITE(VSYNC(pipe),
+ I915_WRITE(VSYNC(transcoder),
(adjusted_mode->crtc_vsync_start - 1) |
((adjusted_mode->crtc_vsync_end - 1) << 16));
@@ -6333,12 +6334,12 @@ struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- int pipe = intel_crtc->pipe;
+ enum transcoder transcoder = intel_crtc->transcoder;
struct drm_display_mode *mode;
- int htot = I915_READ(HTOTAL(pipe));
- int hsync = I915_READ(HSYNC(pipe));
- int vtot = I915_READ(VTOTAL(pipe));
- int vsync = I915_READ(VSYNC(pipe));
+ int htot = I915_READ(HTOTAL(transcoder));
+ int hsync = I915_READ(HSYNC(transcoder));
+ int vtot = I915_READ(VTOTAL(transcoder));
+ int vsync = I915_READ(VSYNC(transcoder));
mode = kzalloc(sizeof(*mode), GFP_KERNEL);
if (!mode)
@@ -8807,12 +8808,12 @@ intel_display_capture_error_state(struct drm_device *dev)
error->pipe[i].conf = I915_READ(PIPECONF(transcoder));
error->pipe[i].source = I915_READ(PIPESRC(i));
- error->pipe[i].htotal = I915_READ(HTOTAL(i));
- error->pipe[i].hblank = I915_READ(HBLANK(i));
- error->pipe[i].hsync = I915_READ(HSYNC(i));
- error->pipe[i].vtotal = I915_READ(VTOTAL(i));
- error->pipe[i].vblank = I915_READ(VBLANK(i));
- error->pipe[i].vsync = I915_READ(VSYNC(i));
+ error->pipe[i].htotal = I915_READ(HTOTAL(transcoder));
+ error->pipe[i].hblank = I915_READ(HBLANK(transcoder));
+ error->pipe[i].hsync = I915_READ(HSYNC(transcoder));
+ error->pipe[i].vtotal = I915_READ(VTOTAL(transcoder));
+ error->pipe[i].vblank = I915_READ(VBLANK(transcoder));
+ error->pipe[i].vsync = I915_READ(VSYNC(transcoder));
}
return error;
--
1.7.10.4
next prev parent reply other threads:[~2012-10-02 20:53 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-02 20:51 [PATCH 00/47] Haswell clocking and HDMI fixes, DP and eDP support Paulo Zanoni
2012-10-02 20:51 ` [PATCH 01/47] drm/i915: rewrite the LCPLL code Paulo Zanoni
2012-10-03 16:47 ` Lespiau, Damien
2012-10-02 20:51 ` [PATCH 02/47] drm/i915: enable and disable DDI_FUNC_CTL at the right time Paulo Zanoni
2012-10-03 17:44 ` Lespiau, Damien
2012-10-04 20:15 ` Paulo Zanoni
2012-10-02 20:51 ` [PATCH 03/47] drm/i915: enable and disable PIPE_CLK_SEL " Paulo Zanoni
2012-10-04 11:28 ` Lespiau, Damien
2012-10-02 20:51 ` [PATCH 04/47] drm/i915: completely rewrite the Haswell PLL handling code Paulo Zanoni
2012-10-02 20:51 ` [PATCH 05/47] drm/i915: don't rely on previous values set on DDI_BUF_CTL Paulo Zanoni
2012-10-02 20:51 ` [PATCH 06/47] drm/i915: disable DDI_BUF_CTL at the correct time Paulo Zanoni
2012-10-02 20:51 ` [PATCH 07/47] drm/i915: add haswell_crtc_mode_set Paulo Zanoni
2012-10-04 14:38 ` Lespiau, Damien
2012-10-02 20:51 ` [PATCH 08/47] drm/i915: add proper CPU/PCH checks to crtc_mode_set functions Paulo Zanoni
2012-10-02 20:51 ` [PATCH 09/47] drm/i915: add haswell_set_pipeconf Paulo Zanoni
2012-10-04 14:36 ` Lespiau, Damien
2012-10-02 20:51 ` [PATCH 10/47] drm/i915: pipe and planes should be disabled on haswell_crtc_mode_set Paulo Zanoni
2012-10-04 14:14 ` Lespiau, Damien
2012-10-05 12:53 ` Paulo Zanoni
2012-10-05 13:15 ` Lespiau, Damien
2012-10-02 20:51 ` [PATCH 11/47] drm/i915: add DP support to intel_ddi_enable_pipe_func Paulo Zanoni
2012-10-02 20:51 ` [PATCH 12/47] drm/i915: add intel_ddi_set_pipe_settings Paulo Zanoni
2012-10-02 20:51 ` [PATCH 13/47] drm/i915: add DP support to intel_ddi_pll_mode_set Paulo Zanoni
2012-10-02 20:51 ` [PATCH 14/47] drm/i915: add DP support to intel_ddi_disable_port Paulo Zanoni
2012-10-02 20:51 ` [PATCH 15/47] drm/i915: add DP support to intel_ddi_mode_set Paulo Zanoni
2012-10-02 20:51 ` [PATCH 16/47] drm/i915: add basic Haswell DP link train bits Paulo Zanoni
2012-10-02 20:51 ` [PATCH 17/47] drm/i915: use TU_SIZE macro at intel_dp_set_m_n Paulo Zanoni
2012-10-02 20:51 ` [PATCH 18/47] drm/i915: fix Haswell DP M/N registers Paulo Zanoni
2012-10-02 20:51 ` [PATCH 19/47] drm/i915: fix DP AUX register definitions on Haswell Paulo Zanoni
2012-10-02 20:51 ` [PATCH 20/47] drm/i915: add DP support to intel_ddi_get_encoder_port Paulo Zanoni
2012-10-02 20:51 ` [PATCH 21/47] drm/i915: add DP support to intel_ddi_get_hw_state Paulo Zanoni
2012-10-02 20:51 ` [PATCH 22/47] drm/i915: add DP support to intel_enable_ddi Paulo Zanoni
2012-10-02 20:51 ` [PATCH 23/47] drm/i915: implement Haswell DP link train sequence Paulo Zanoni
2012-10-02 20:51 ` [PATCH 24/47] drm/i915: set the correct function pointers for Haswell DP Paulo Zanoni
2012-10-02 20:52 ` [PATCH 25/47] drm/i915: add TRANSCODER_EDP Paulo Zanoni
2012-10-02 20:52 ` [PATCH 26/47] drm/i915: convert PIPE_CLK_SEL to transcoder Paulo Zanoni
2012-10-02 20:52 ` [PATCH 27/47] drm/i915: convert DDI_FUNC_CTL " Paulo Zanoni
2012-10-02 20:52 ` [PATCH 28/47] drm/i915: check TRANSCODER_EDP on intel_modeset_setup_hw_state Paulo Zanoni
2012-10-02 20:52 ` [PATCH 29/47] drm/i915: convert PIPECONF to use transcoder instead of pipe Paulo Zanoni
2012-10-02 20:52 ` [PATCH 30/47] drm/i915: convert PIPE_MSA_MISC to transcoder Paulo Zanoni
2012-10-02 20:52 ` [PATCH 31/47] drm/i915: convert CPU M/N timings " Paulo Zanoni
2012-10-02 20:52 ` Paulo Zanoni [this message]
2012-10-02 20:52 ` [PATCH 33/47] drm/i915: implement workaround for VTOTAL when using TRANSCODER_EDP Paulo Zanoni
2012-10-02 20:52 ` [PATCH 34/47] drm/i915: select the correct pipe " Paulo Zanoni
2012-10-02 20:52 ` [PATCH 35/47] drm/i915: set the correct eDP aux channel clock divider on DDI Paulo Zanoni
2012-10-02 20:52 ` [PATCH 36/47] drm/i915: set/unset the DDI eDP backlight Paulo Zanoni
2012-10-02 20:52 ` [PATCH 37/47] drm/i915: turn the eDP DDI panel on/off Paulo Zanoni
2012-10-02 20:52 ` [PATCH 38/47] drm/i915: enable DDI eDP Paulo Zanoni
2012-10-02 20:52 ` [PATCH 39/47] drm/i915: simplify assignments inside intel_dp.c Paulo Zanoni
2012-10-02 20:52 ` [PATCH 40/47] drm/i915: add intel_dp_to_dev and intel_hdmi_to_dev Paulo Zanoni
2012-10-02 20:52 ` [PATCH 41/47] drm/i915: create intel_digital_port and use it Paulo Zanoni
2012-10-02 20:52 ` [PATCH 42/47] drm/i915: remove encoder args from intel_{dp, hdmi}_add_properties Paulo Zanoni
2012-10-02 20:52 ` [PATCH 43/47] drm/i915: split intel_hdmi_init into encoder and connector pieces Paulo Zanoni
2012-10-02 20:52 ` [PATCH 44/47] drm/i915: split intel_dp_init " Paulo Zanoni
2012-10-02 20:52 ` [PATCH 45/47] drm/i915: reset intel_encoder->type when DP or HDMI is detected Paulo Zanoni
2012-10-02 20:52 ` [PATCH 46/47] drm/i915: add intel_ddi_connector_get_hw_state Paulo Zanoni
2012-10-02 20:52 ` [PATCH 47/47] drm/i915: create the DDI encoder Paulo Zanoni
2012-10-05 15:05 ` [PATCH 00/10] Haswell pipe and clocking fixes Paulo Zanoni
2012-10-05 15:05 ` [PATCH 01/10] drm/i915: rewrite the LCPLL code Paulo Zanoni
2012-10-10 12:47 ` Lespiau, Damien
2012-10-10 12:53 ` Lespiau, Damien
2012-10-05 15:05 ` [PATCH 02/10] drm/i915: enable and disable DDI_FUNC_CTL at the right time Paulo Zanoni
2012-10-10 13:04 ` Lespiau, Damien
2012-10-05 15:05 ` [PATCH 03/10] drm/i915: enable and disable PIPE_CLK_SEL " Paulo Zanoni
2012-10-10 13:05 ` Lespiau, Damien
2012-10-05 15:05 ` [PATCH 04/10] drm/i915: add haswell_crtc_mode_set Paulo Zanoni
2012-10-10 13:07 ` Lespiau, Damien
2012-10-05 15:05 ` [PATCH 05/10] drm/i915: add proper CPU/PCH checks to crtc_mode_set functions Paulo Zanoni
2012-10-10 13:52 ` Lespiau, Damien
2012-10-05 15:05 ` [PATCH 06/10] drm/i915: add haswell_set_pipeconf Paulo Zanoni
2012-10-10 13:59 ` Lespiau, Damien
2012-10-05 15:05 ` [PATCH 07/10] drm/i915: completely rewrite the Haswell PLL handling code Paulo Zanoni
2012-10-10 14:22 ` Lespiau, Damien
2012-10-10 14:52 ` Daniel Vetter
2012-10-05 15:05 ` [PATCH 08/10] drm/i915: don't rely on previous values set on DDI_BUF_CTL Paulo Zanoni
2012-10-10 14:27 ` Lespiau, Damien
2012-10-10 14:56 ` Daniel Vetter
2012-10-10 18:18 ` Daniel Vetter
2012-10-05 15:06 ` [PATCH 09/10] drm/i915: disable DDI_BUF_CTL at the correct time Paulo Zanoni
2012-10-10 22:30 ` Lespiau, Damien
2012-10-05 15:06 ` [PATCH 10/10] drm/i915: pipe and planes should be disabled on haswell_crtc_mode_set Paulo Zanoni
2012-10-10 21:57 ` Lespiau, Damien
2012-10-10 22:47 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1349211142-4802-33-git-send-email-przanoni@gmail.com \
--to=przanoni@gmail.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=paulo.r.zanoni@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox