From: Paulo Zanoni <przanoni@gmail.com>
To: intel-gfx@lists.freedesktop.org
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: [PATCH 02/10] drm/i915: enable and disable DDI_FUNC_CTL at the right time
Date: Fri, 5 Oct 2012 12:05:53 -0300 [thread overview]
Message-ID: <1349449561-3599-3-git-send-email-przanoni@gmail.com> (raw)
In-Reply-To: <1349449561-3599-1-git-send-email-przanoni@gmail.com>
From: Paulo Zanoni <paulo.r.zanoni@intel.com>
And the right time is exactly after/before changing PIPE_CONF. See the
documentation about the mode set sequence.
This code is not inside any encoder-specific callback because
DDI_FUNC_CTL is part of the pipe, so it is used by all encoders.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 1 +
drivers/gpu/drm/i915/intel_ddi.c | 83 +++++++++++++++++++++++++++---------
drivers/gpu/drm/i915/intel_display.c | 6 +++
drivers/gpu/drm/i915/intel_drv.h | 3 ++
4 files changed, 74 insertions(+), 19 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 5107cee..d1b58d0 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4394,6 +4394,7 @@
/* Those bits are ignored by pipe EDP since it can only connect to DDI A */
#define PIPE_DDI_PORT_MASK (7<<28)
#define PIPE_DDI_SELECT_PORT(x) ((x)<<28)
+#define PIPE_DDI_PORT_NONE (0<<28)
#define PIPE_DDI_MODE_SELECT_MASK (7<<24)
#define PIPE_DDI_MODE_SELECT_HDMI (0<<24)
#define PIPE_DDI_MODE_SELECT_DVI (1<<24)
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index d912dbf..4ee3038 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -203,15 +203,6 @@ void hsw_fdi_link_train(struct drm_crtc *crtc)
DP_TP_CTL_ENHANCED_FRAME_ENABLE |
DP_TP_CTL_ENABLE);
- /* Enable PIPE_DDI_FUNC_CTL for the pipe to work in FDI mode */
- temp = I915_READ(DDI_FUNC_CTL(pipe));
- temp &= ~PIPE_DDI_PORT_MASK;
- temp |= PIPE_DDI_SELECT_PORT(PORT_E) |
- PIPE_DDI_MODE_SELECT_FDI |
- PIPE_DDI_FUNC_ENABLE |
- PIPE_DDI_PORT_WIDTH_X2;
- I915_WRITE(DDI_FUNC_CTL(pipe),
- temp);
break;
} else {
DRM_ERROR("Error training BUF_CTL %d\n", i);
@@ -657,7 +648,7 @@ void intel_ddi_mode_set(struct drm_encoder *encoder,
int port = intel_hdmi->ddi_port;
int pipe = intel_crtc->pipe;
int p, n2, r2;
- u32 temp, i;
+ u32 i;
/* On Haswell, we need to enable the clocks and prepare DDI function to
* work in HDMI mode for this pipe.
@@ -715,8 +706,40 @@ void intel_ddi_mode_set(struct drm_encoder *encoder,
intel_write_eld(encoder, adjusted_mode);
}
+ intel_hdmi->set_infoframes(encoder, adjusted_mode);
+}
+
+static struct intel_encoder *
+intel_ddi_get_crtc_encoder(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_encoder *intel_encoder, *ret = NULL;
+ int num_encoders = 0;
+
+ for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
+ ret = intel_encoder;
+ num_encoders++;
+ }
+
+ if (num_encoders != 1)
+ WARN(1, "%d encoders on crtc for pipe %d\n", num_encoders,
+ intel_crtc->pipe);
+
+ BUG_ON(ret == NULL);
+ return ret;
+}
+
+void intel_ddi_enable_pipe_func(struct drm_crtc *crtc)
+{
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc);
+ struct drm_i915_private *dev_priv = crtc->dev->dev_private;
+ enum pipe pipe = intel_crtc->pipe;
+ uint32_t temp;
+
/* Enable PIPE_DDI_FUNC_CTL for the pipe to work in HDMI mode */
- temp = PIPE_DDI_FUNC_ENABLE | PIPE_DDI_SELECT_PORT(port);
+ temp = PIPE_DDI_FUNC_ENABLE;
switch (intel_crtc->bpp) {
case 18:
@@ -736,19 +759,41 @@ void intel_ddi_mode_set(struct drm_encoder *encoder,
intel_crtc->bpp);
}
- if (intel_hdmi->has_hdmi_sink)
- temp |= PIPE_DDI_MODE_SELECT_HDMI;
- else
- temp |= PIPE_DDI_MODE_SELECT_DVI;
-
- if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+ if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC)
temp |= PIPE_DDI_PVSYNC;
- if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+ if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
temp |= PIPE_DDI_PHSYNC;
+ if (intel_encoder->type == INTEL_OUTPUT_HDMI) {
+ struct intel_hdmi *intel_hdmi =
+ enc_to_intel_hdmi(&intel_encoder->base);
+
+ if (intel_hdmi->has_hdmi_sink)
+ temp |= PIPE_DDI_MODE_SELECT_HDMI;
+ else
+ temp |= PIPE_DDI_MODE_SELECT_DVI;
+
+ temp |= PIPE_DDI_SELECT_PORT(intel_hdmi->ddi_port);
+ } else if (intel_encoder->type == INTEL_OUTPUT_ANALOG) {
+ temp |= PIPE_DDI_MODE_SELECT_FDI;
+ temp |= PIPE_DDI_SELECT_PORT(PORT_E);
+ } else {
+ WARN(1, "Invalid encoder type %d for pipe %d\n",
+ intel_encoder->type, pipe);
+ }
+
I915_WRITE(DDI_FUNC_CTL(pipe), temp);
+}
- intel_hdmi->set_infoframes(encoder, adjusted_mode);
+void intel_ddi_disable_pipe_func(struct drm_i915_private *dev_priv,
+ enum pipe pipe)
+{
+ uint32_t reg = DDI_FUNC_CTL(pipe);
+ uint32_t val = I915_READ(reg);
+
+ val &= ~(PIPE_DDI_FUNC_ENABLE | PIPE_DDI_PORT_MASK);
+ val |= PIPE_DDI_PORT_NONE;
+ I915_WRITE(reg, val);
}
bool intel_ddi_get_hw_state(struct intel_encoder *encoder,
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 40f98d1..e4f07a2 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3215,6 +3215,9 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
*/
intel_crtc_load_lut(crtc);
+ if (IS_HASWELL(dev))
+ intel_ddi_enable_pipe_func(crtc);
+
intel_enable_pipe(dev_priv, pipe, is_pch_port);
intel_enable_plane(dev_priv, plane, pipe);
@@ -3262,6 +3265,9 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc)
intel_disable_pipe(dev_priv, pipe);
+ if (IS_HASWELL(dev))
+ intel_ddi_disable_pipe_func(dev_priv, pipe);
+
/* Disable PF */
I915_WRITE(PF_CTL(pipe), 0);
I915_WRITE(PF_WIN_SZ(pipe), 0);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 57566b7..0253bb4 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -581,5 +581,8 @@ extern void intel_ddi_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
extern void intel_ddi_pll_init(struct drm_device *dev);
+extern void intel_ddi_enable_pipe_func(struct drm_crtc *crtc);
+extern void intel_ddi_disable_pipe_func(struct drm_i915_private *dev_priv,
+ enum pipe pipe);
#endif /* __INTEL_DRV_H__ */
--
1.7.11.4
next prev parent reply other threads:[~2012-10-05 15:06 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-02 20:51 [PATCH 00/47] Haswell clocking and HDMI fixes, DP and eDP support Paulo Zanoni
2012-10-02 20:51 ` [PATCH 01/47] drm/i915: rewrite the LCPLL code Paulo Zanoni
2012-10-03 16:47 ` Lespiau, Damien
2012-10-02 20:51 ` [PATCH 02/47] drm/i915: enable and disable DDI_FUNC_CTL at the right time Paulo Zanoni
2012-10-03 17:44 ` Lespiau, Damien
2012-10-04 20:15 ` Paulo Zanoni
2012-10-02 20:51 ` [PATCH 03/47] drm/i915: enable and disable PIPE_CLK_SEL " Paulo Zanoni
2012-10-04 11:28 ` Lespiau, Damien
2012-10-02 20:51 ` [PATCH 04/47] drm/i915: completely rewrite the Haswell PLL handling code Paulo Zanoni
2012-10-02 20:51 ` [PATCH 05/47] drm/i915: don't rely on previous values set on DDI_BUF_CTL Paulo Zanoni
2012-10-02 20:51 ` [PATCH 06/47] drm/i915: disable DDI_BUF_CTL at the correct time Paulo Zanoni
2012-10-02 20:51 ` [PATCH 07/47] drm/i915: add haswell_crtc_mode_set Paulo Zanoni
2012-10-04 14:38 ` Lespiau, Damien
2012-10-02 20:51 ` [PATCH 08/47] drm/i915: add proper CPU/PCH checks to crtc_mode_set functions Paulo Zanoni
2012-10-02 20:51 ` [PATCH 09/47] drm/i915: add haswell_set_pipeconf Paulo Zanoni
2012-10-04 14:36 ` Lespiau, Damien
2012-10-02 20:51 ` [PATCH 10/47] drm/i915: pipe and planes should be disabled on haswell_crtc_mode_set Paulo Zanoni
2012-10-04 14:14 ` Lespiau, Damien
2012-10-05 12:53 ` Paulo Zanoni
2012-10-05 13:15 ` Lespiau, Damien
2012-10-02 20:51 ` [PATCH 11/47] drm/i915: add DP support to intel_ddi_enable_pipe_func Paulo Zanoni
2012-10-02 20:51 ` [PATCH 12/47] drm/i915: add intel_ddi_set_pipe_settings Paulo Zanoni
2012-10-02 20:51 ` [PATCH 13/47] drm/i915: add DP support to intel_ddi_pll_mode_set Paulo Zanoni
2012-10-02 20:51 ` [PATCH 14/47] drm/i915: add DP support to intel_ddi_disable_port Paulo Zanoni
2012-10-02 20:51 ` [PATCH 15/47] drm/i915: add DP support to intel_ddi_mode_set Paulo Zanoni
2012-10-02 20:51 ` [PATCH 16/47] drm/i915: add basic Haswell DP link train bits Paulo Zanoni
2012-10-02 20:51 ` [PATCH 17/47] drm/i915: use TU_SIZE macro at intel_dp_set_m_n Paulo Zanoni
2012-10-02 20:51 ` [PATCH 18/47] drm/i915: fix Haswell DP M/N registers Paulo Zanoni
2012-10-02 20:51 ` [PATCH 19/47] drm/i915: fix DP AUX register definitions on Haswell Paulo Zanoni
2012-10-02 20:51 ` [PATCH 20/47] drm/i915: add DP support to intel_ddi_get_encoder_port Paulo Zanoni
2012-10-02 20:51 ` [PATCH 21/47] drm/i915: add DP support to intel_ddi_get_hw_state Paulo Zanoni
2012-10-02 20:51 ` [PATCH 22/47] drm/i915: add DP support to intel_enable_ddi Paulo Zanoni
2012-10-02 20:51 ` [PATCH 23/47] drm/i915: implement Haswell DP link train sequence Paulo Zanoni
2012-10-02 20:51 ` [PATCH 24/47] drm/i915: set the correct function pointers for Haswell DP Paulo Zanoni
2012-10-02 20:52 ` [PATCH 25/47] drm/i915: add TRANSCODER_EDP Paulo Zanoni
2012-10-02 20:52 ` [PATCH 26/47] drm/i915: convert PIPE_CLK_SEL to transcoder Paulo Zanoni
2012-10-02 20:52 ` [PATCH 27/47] drm/i915: convert DDI_FUNC_CTL " Paulo Zanoni
2012-10-02 20:52 ` [PATCH 28/47] drm/i915: check TRANSCODER_EDP on intel_modeset_setup_hw_state Paulo Zanoni
2012-10-02 20:52 ` [PATCH 29/47] drm/i915: convert PIPECONF to use transcoder instead of pipe Paulo Zanoni
2012-10-02 20:52 ` [PATCH 30/47] drm/i915: convert PIPE_MSA_MISC to transcoder Paulo Zanoni
2012-10-02 20:52 ` [PATCH 31/47] drm/i915: convert CPU M/N timings " Paulo Zanoni
2012-10-02 20:52 ` [PATCH 32/47] drm/i915: convert pipe timing definitions " Paulo Zanoni
2012-10-02 20:52 ` [PATCH 33/47] drm/i915: implement workaround for VTOTAL when using TRANSCODER_EDP Paulo Zanoni
2012-10-02 20:52 ` [PATCH 34/47] drm/i915: select the correct pipe " Paulo Zanoni
2012-10-02 20:52 ` [PATCH 35/47] drm/i915: set the correct eDP aux channel clock divider on DDI Paulo Zanoni
2012-10-02 20:52 ` [PATCH 36/47] drm/i915: set/unset the DDI eDP backlight Paulo Zanoni
2012-10-02 20:52 ` [PATCH 37/47] drm/i915: turn the eDP DDI panel on/off Paulo Zanoni
2012-10-02 20:52 ` [PATCH 38/47] drm/i915: enable DDI eDP Paulo Zanoni
2012-10-02 20:52 ` [PATCH 39/47] drm/i915: simplify assignments inside intel_dp.c Paulo Zanoni
2012-10-02 20:52 ` [PATCH 40/47] drm/i915: add intel_dp_to_dev and intel_hdmi_to_dev Paulo Zanoni
2012-10-02 20:52 ` [PATCH 41/47] drm/i915: create intel_digital_port and use it Paulo Zanoni
2012-10-02 20:52 ` [PATCH 42/47] drm/i915: remove encoder args from intel_{dp, hdmi}_add_properties Paulo Zanoni
2012-10-02 20:52 ` [PATCH 43/47] drm/i915: split intel_hdmi_init into encoder and connector pieces Paulo Zanoni
2012-10-02 20:52 ` [PATCH 44/47] drm/i915: split intel_dp_init " Paulo Zanoni
2012-10-02 20:52 ` [PATCH 45/47] drm/i915: reset intel_encoder->type when DP or HDMI is detected Paulo Zanoni
2012-10-02 20:52 ` [PATCH 46/47] drm/i915: add intel_ddi_connector_get_hw_state Paulo Zanoni
2012-10-02 20:52 ` [PATCH 47/47] drm/i915: create the DDI encoder Paulo Zanoni
2012-10-05 15:05 ` [PATCH 00/10] Haswell pipe and clocking fixes Paulo Zanoni
2012-10-05 15:05 ` [PATCH 01/10] drm/i915: rewrite the LCPLL code Paulo Zanoni
2012-10-10 12:47 ` Lespiau, Damien
2012-10-10 12:53 ` Lespiau, Damien
2012-10-05 15:05 ` Paulo Zanoni [this message]
2012-10-10 13:04 ` [PATCH 02/10] drm/i915: enable and disable DDI_FUNC_CTL at the right time Lespiau, Damien
2012-10-05 15:05 ` [PATCH 03/10] drm/i915: enable and disable PIPE_CLK_SEL " Paulo Zanoni
2012-10-10 13:05 ` Lespiau, Damien
2012-10-05 15:05 ` [PATCH 04/10] drm/i915: add haswell_crtc_mode_set Paulo Zanoni
2012-10-10 13:07 ` Lespiau, Damien
2012-10-05 15:05 ` [PATCH 05/10] drm/i915: add proper CPU/PCH checks to crtc_mode_set functions Paulo Zanoni
2012-10-10 13:52 ` Lespiau, Damien
2012-10-05 15:05 ` [PATCH 06/10] drm/i915: add haswell_set_pipeconf Paulo Zanoni
2012-10-10 13:59 ` Lespiau, Damien
2012-10-05 15:05 ` [PATCH 07/10] drm/i915: completely rewrite the Haswell PLL handling code Paulo Zanoni
2012-10-10 14:22 ` Lespiau, Damien
2012-10-10 14:52 ` Daniel Vetter
2012-10-05 15:05 ` [PATCH 08/10] drm/i915: don't rely on previous values set on DDI_BUF_CTL Paulo Zanoni
2012-10-10 14:27 ` Lespiau, Damien
2012-10-10 14:56 ` Daniel Vetter
2012-10-10 18:18 ` Daniel Vetter
2012-10-05 15:06 ` [PATCH 09/10] drm/i915: disable DDI_BUF_CTL at the correct time Paulo Zanoni
2012-10-10 22:30 ` Lespiau, Damien
2012-10-05 15:06 ` [PATCH 10/10] drm/i915: pipe and planes should be disabled on haswell_crtc_mode_set Paulo Zanoni
2012-10-10 21:57 ` Lespiau, Damien
2012-10-10 22:47 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1349449561-3599-3-git-send-email-przanoni@gmail.com \
--to=przanoni@gmail.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=paulo.r.zanoni@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox