From: Paulo Zanoni <przanoni@gmail.com>
To: intel-gfx@lists.freedesktop.org
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: [PATCH 46/47] drm/i915: add intel_ddi_connector_get_hw_state
Date: Tue, 2 Oct 2012 17:52:21 -0300 [thread overview]
Message-ID: <1349211142-4802-47-git-send-email-przanoni@gmail.com> (raw)
In-Reply-To: <1349211142-4802-1-git-send-email-przanoni@gmail.com>
From: Paulo Zanoni <paulo.r.zanoni@intel.com>
We need this since now on DDI we will have 2 connectors on each
encoder.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
---
drivers/gpu/drm/i915/intel_ddi.c | 40 +++++++++++++++++++++++++++++++++++++
drivers/gpu/drm/i915/intel_dp.c | 6 +++++-
drivers/gpu/drm/i915/intel_drv.h | 1 +
drivers/gpu/drm/i915/intel_hdmi.c | 5 ++++-
4 files changed, 50 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index beea8a6..81e9f06 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -1021,6 +1021,46 @@ void intel_ddi_disable_transcoder_func(struct drm_i915_private *dev_priv,
I915_WRITE(reg, val);
}
+bool intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector)
+{
+ struct drm_device *dev = intel_connector->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_encoder *intel_encoder = intel_connector->encoder;
+ int type = intel_connector->base.connector_type;
+ enum port port = intel_ddi_get_encoder_port(intel_encoder);
+ enum pipe pipe = 0;
+ enum transcoder transcoder;
+ uint32_t tmp;
+
+ if (!intel_encoder->get_hw_state(intel_encoder, &pipe))
+ return false;
+
+ if (port == PORT_A)
+ transcoder = TRANSCODER_EDP;
+ else
+ transcoder = pipe;
+
+ tmp = I915_READ(DDI_FUNC_CTL(transcoder));
+
+ switch (tmp & TRANS_DDI_MODE_SELECT_MASK) {
+ case TRANS_DDI_MODE_SELECT_HDMI:
+ case TRANS_DDI_MODE_SELECT_DVI:
+ return (type == DRM_MODE_CONNECTOR_HDMIA);
+
+ case TRANS_DDI_MODE_SELECT_DP_SST:
+ if (type == DRM_MODE_CONNECTOR_eDP)
+ return true;
+ case TRANS_DDI_MODE_SELECT_DP_MST:
+ return (type == DRM_MODE_CONNECTOR_DisplayPort);
+
+ case TRANS_DDI_MODE_SELECT_FDI:
+ return (type == DRM_MODE_CONNECTOR_VGA);
+
+ default:
+ return false;
+ }
+}
+
bool intel_ddi_get_hw_state(struct intel_encoder *encoder,
enum pipe *pipe)
{
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index eaed4ee..fba96c6 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2706,7 +2706,11 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
intel_connector_attach_encoder(intel_connector, intel_encoder);
drm_sysfs_connector_add(connector);
- intel_connector->get_hw_state = intel_connector_get_hw_state;
+ if (IS_HASWELL(dev))
+ intel_connector->get_hw_state = intel_ddi_connector_get_hw_state;
+ else
+ intel_connector->get_hw_state = intel_connector_get_hw_state;
+
/* Set up the DDC bus. */
switch (port) {
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 6803b99..402fe70 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -635,5 +635,6 @@ extern void intel_ddi_post_disable(struct intel_encoder *intel_encoder);
extern void intel_ddi_put_crtc_pll(struct drm_crtc *crtc);
extern void intel_ddi_set_pipe_settings(struct drm_crtc *crtc);
extern void intel_ddi_prepare_link_retrain(struct drm_encoder *encoder);
+bool intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector);
#endif /* __INTEL_DRV_H__ */
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index fe8b576..ae5ee37 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -1003,7 +1003,10 @@ static void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
intel_hdmi->set_infoframes = cpt_set_infoframes;
}
- intel_connector->get_hw_state = intel_connector_get_hw_state;
+ if (IS_HASWELL(dev))
+ intel_connector->get_hw_state = intel_ddi_connector_get_hw_state;
+ else
+ intel_connector->get_hw_state = intel_connector_get_hw_state;
intel_hdmi_add_properties(connector);
--
1.7.10.4
next prev parent reply other threads:[~2012-10-02 20:54 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-02 20:51 [PATCH 00/47] Haswell clocking and HDMI fixes, DP and eDP support Paulo Zanoni
2012-10-02 20:51 ` [PATCH 01/47] drm/i915: rewrite the LCPLL code Paulo Zanoni
2012-10-03 16:47 ` Lespiau, Damien
2012-10-02 20:51 ` [PATCH 02/47] drm/i915: enable and disable DDI_FUNC_CTL at the right time Paulo Zanoni
2012-10-03 17:44 ` Lespiau, Damien
2012-10-04 20:15 ` Paulo Zanoni
2012-10-02 20:51 ` [PATCH 03/47] drm/i915: enable and disable PIPE_CLK_SEL " Paulo Zanoni
2012-10-04 11:28 ` Lespiau, Damien
2012-10-02 20:51 ` [PATCH 04/47] drm/i915: completely rewrite the Haswell PLL handling code Paulo Zanoni
2012-10-02 20:51 ` [PATCH 05/47] drm/i915: don't rely on previous values set on DDI_BUF_CTL Paulo Zanoni
2012-10-02 20:51 ` [PATCH 06/47] drm/i915: disable DDI_BUF_CTL at the correct time Paulo Zanoni
2012-10-02 20:51 ` [PATCH 07/47] drm/i915: add haswell_crtc_mode_set Paulo Zanoni
2012-10-04 14:38 ` Lespiau, Damien
2012-10-02 20:51 ` [PATCH 08/47] drm/i915: add proper CPU/PCH checks to crtc_mode_set functions Paulo Zanoni
2012-10-02 20:51 ` [PATCH 09/47] drm/i915: add haswell_set_pipeconf Paulo Zanoni
2012-10-04 14:36 ` Lespiau, Damien
2012-10-02 20:51 ` [PATCH 10/47] drm/i915: pipe and planes should be disabled on haswell_crtc_mode_set Paulo Zanoni
2012-10-04 14:14 ` Lespiau, Damien
2012-10-05 12:53 ` Paulo Zanoni
2012-10-05 13:15 ` Lespiau, Damien
2012-10-02 20:51 ` [PATCH 11/47] drm/i915: add DP support to intel_ddi_enable_pipe_func Paulo Zanoni
2012-10-02 20:51 ` [PATCH 12/47] drm/i915: add intel_ddi_set_pipe_settings Paulo Zanoni
2012-10-02 20:51 ` [PATCH 13/47] drm/i915: add DP support to intel_ddi_pll_mode_set Paulo Zanoni
2012-10-02 20:51 ` [PATCH 14/47] drm/i915: add DP support to intel_ddi_disable_port Paulo Zanoni
2012-10-02 20:51 ` [PATCH 15/47] drm/i915: add DP support to intel_ddi_mode_set Paulo Zanoni
2012-10-02 20:51 ` [PATCH 16/47] drm/i915: add basic Haswell DP link train bits Paulo Zanoni
2012-10-02 20:51 ` [PATCH 17/47] drm/i915: use TU_SIZE macro at intel_dp_set_m_n Paulo Zanoni
2012-10-02 20:51 ` [PATCH 18/47] drm/i915: fix Haswell DP M/N registers Paulo Zanoni
2012-10-02 20:51 ` [PATCH 19/47] drm/i915: fix DP AUX register definitions on Haswell Paulo Zanoni
2012-10-02 20:51 ` [PATCH 20/47] drm/i915: add DP support to intel_ddi_get_encoder_port Paulo Zanoni
2012-10-02 20:51 ` [PATCH 21/47] drm/i915: add DP support to intel_ddi_get_hw_state Paulo Zanoni
2012-10-02 20:51 ` [PATCH 22/47] drm/i915: add DP support to intel_enable_ddi Paulo Zanoni
2012-10-02 20:51 ` [PATCH 23/47] drm/i915: implement Haswell DP link train sequence Paulo Zanoni
2012-10-02 20:51 ` [PATCH 24/47] drm/i915: set the correct function pointers for Haswell DP Paulo Zanoni
2012-10-02 20:52 ` [PATCH 25/47] drm/i915: add TRANSCODER_EDP Paulo Zanoni
2012-10-02 20:52 ` [PATCH 26/47] drm/i915: convert PIPE_CLK_SEL to transcoder Paulo Zanoni
2012-10-02 20:52 ` [PATCH 27/47] drm/i915: convert DDI_FUNC_CTL " Paulo Zanoni
2012-10-02 20:52 ` [PATCH 28/47] drm/i915: check TRANSCODER_EDP on intel_modeset_setup_hw_state Paulo Zanoni
2012-10-02 20:52 ` [PATCH 29/47] drm/i915: convert PIPECONF to use transcoder instead of pipe Paulo Zanoni
2012-10-02 20:52 ` [PATCH 30/47] drm/i915: convert PIPE_MSA_MISC to transcoder Paulo Zanoni
2012-10-02 20:52 ` [PATCH 31/47] drm/i915: convert CPU M/N timings " Paulo Zanoni
2012-10-02 20:52 ` [PATCH 32/47] drm/i915: convert pipe timing definitions " Paulo Zanoni
2012-10-02 20:52 ` [PATCH 33/47] drm/i915: implement workaround for VTOTAL when using TRANSCODER_EDP Paulo Zanoni
2012-10-02 20:52 ` [PATCH 34/47] drm/i915: select the correct pipe " Paulo Zanoni
2012-10-02 20:52 ` [PATCH 35/47] drm/i915: set the correct eDP aux channel clock divider on DDI Paulo Zanoni
2012-10-02 20:52 ` [PATCH 36/47] drm/i915: set/unset the DDI eDP backlight Paulo Zanoni
2012-10-02 20:52 ` [PATCH 37/47] drm/i915: turn the eDP DDI panel on/off Paulo Zanoni
2012-10-02 20:52 ` [PATCH 38/47] drm/i915: enable DDI eDP Paulo Zanoni
2012-10-02 20:52 ` [PATCH 39/47] drm/i915: simplify assignments inside intel_dp.c Paulo Zanoni
2012-10-02 20:52 ` [PATCH 40/47] drm/i915: add intel_dp_to_dev and intel_hdmi_to_dev Paulo Zanoni
2012-10-02 20:52 ` [PATCH 41/47] drm/i915: create intel_digital_port and use it Paulo Zanoni
2012-10-02 20:52 ` [PATCH 42/47] drm/i915: remove encoder args from intel_{dp, hdmi}_add_properties Paulo Zanoni
2012-10-02 20:52 ` [PATCH 43/47] drm/i915: split intel_hdmi_init into encoder and connector pieces Paulo Zanoni
2012-10-02 20:52 ` [PATCH 44/47] drm/i915: split intel_dp_init " Paulo Zanoni
2012-10-02 20:52 ` [PATCH 45/47] drm/i915: reset intel_encoder->type when DP or HDMI is detected Paulo Zanoni
2012-10-02 20:52 ` Paulo Zanoni [this message]
2012-10-02 20:52 ` [PATCH 47/47] drm/i915: create the DDI encoder Paulo Zanoni
2012-10-05 15:05 ` [PATCH 00/10] Haswell pipe and clocking fixes Paulo Zanoni
2012-10-05 15:05 ` [PATCH 01/10] drm/i915: rewrite the LCPLL code Paulo Zanoni
2012-10-10 12:47 ` Lespiau, Damien
2012-10-10 12:53 ` Lespiau, Damien
2012-10-05 15:05 ` [PATCH 02/10] drm/i915: enable and disable DDI_FUNC_CTL at the right time Paulo Zanoni
2012-10-10 13:04 ` Lespiau, Damien
2012-10-05 15:05 ` [PATCH 03/10] drm/i915: enable and disable PIPE_CLK_SEL " Paulo Zanoni
2012-10-10 13:05 ` Lespiau, Damien
2012-10-05 15:05 ` [PATCH 04/10] drm/i915: add haswell_crtc_mode_set Paulo Zanoni
2012-10-10 13:07 ` Lespiau, Damien
2012-10-05 15:05 ` [PATCH 05/10] drm/i915: add proper CPU/PCH checks to crtc_mode_set functions Paulo Zanoni
2012-10-10 13:52 ` Lespiau, Damien
2012-10-05 15:05 ` [PATCH 06/10] drm/i915: add haswell_set_pipeconf Paulo Zanoni
2012-10-10 13:59 ` Lespiau, Damien
2012-10-05 15:05 ` [PATCH 07/10] drm/i915: completely rewrite the Haswell PLL handling code Paulo Zanoni
2012-10-10 14:22 ` Lespiau, Damien
2012-10-10 14:52 ` Daniel Vetter
2012-10-05 15:05 ` [PATCH 08/10] drm/i915: don't rely on previous values set on DDI_BUF_CTL Paulo Zanoni
2012-10-10 14:27 ` Lespiau, Damien
2012-10-10 14:56 ` Daniel Vetter
2012-10-10 18:18 ` Daniel Vetter
2012-10-05 15:06 ` [PATCH 09/10] drm/i915: disable DDI_BUF_CTL at the correct time Paulo Zanoni
2012-10-10 22:30 ` Lespiau, Damien
2012-10-05 15:06 ` [PATCH 10/10] drm/i915: pipe and planes should be disabled on haswell_crtc_mode_set Paulo Zanoni
2012-10-10 21:57 ` Lespiau, Damien
2012-10-10 22:47 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1349211142-4802-47-git-send-email-przanoni@gmail.com \
--to=przanoni@gmail.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=paulo.r.zanoni@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox