[PATCH 04/10] drm/i915: add haswell_crtc_mode_set

[Paulo Zanoni <przanoni@gmail.com>]

From: Paulo Zanoni <paulo.r.zanoni@intel.com>

It's just a copy of ironlake_crtc_mode_set.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 187 ++++++++++++++++++++++++++++++++++-
 1 file changed, 186 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index faa2013..ef89132 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5142,6 +5142,185 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 	return ret;
 }
 
+static int haswell_crtc_mode_set(struct drm_crtc *crtc,
+				 struct drm_display_mode *mode,
+				 struct drm_display_mode *adjusted_mode,
+				 int x, int y,
+				 struct drm_framebuffer *fb)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int plane = intel_crtc->plane;
+	int num_connectors = 0;
+	intel_clock_t clock, reduced_clock;
+	u32 dpll, fp = 0, fp2 = 0;
+	bool ok, has_reduced_clock = false;
+	bool is_lvds = false, is_dp = false, is_cpu_edp = false;
+	struct intel_encoder *encoder;
+	u32 temp;
+	int ret;
+	bool dither;
+
+	for_each_encoder_on_crtc(dev, crtc, encoder) {
+		switch (encoder->type) {
+		case INTEL_OUTPUT_LVDS:
+			is_lvds = true;
+			break;
+		case INTEL_OUTPUT_DISPLAYPORT:
+			is_dp = true;
+			break;
+		case INTEL_OUTPUT_EDP:
+			is_dp = true;
+			if (!intel_encoder_is_pch_edp(&encoder->base))
+				is_cpu_edp = true;
+			break;
+		}
+
+		num_connectors++;
+	}
+
+	ok = ironlake_compute_clocks(crtc, adjusted_mode, &clock,
+				     &has_reduced_clock, &reduced_clock);
+	if (!ok) {
+		DRM_ERROR("Couldn't find PLL settings for mode!\n");
+		return -EINVAL;
+	}
+
+	/* Ensure that the cursor is valid for the new mode before changing... */
+	intel_crtc_update_cursor(crtc, true);
+
+	/* determine panel color depth */
+	dither = intel_choose_pipe_bpp_dither(crtc, fb, &intel_crtc->bpp, mode);
+	if (is_lvds && dev_priv->lvds_dither)
+		dither = true;
+
+	fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
+	if (has_reduced_clock)
+		fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
+			reduced_clock.m2;
+
+	dpll = ironlake_compute_dpll(intel_crtc, adjusted_mode, &clock, fp);
+
+	DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
+	drm_mode_debug_printmodeline(mode);
+
+	/* CPU eDP is the only output that doesn't need a PCH PLL of its own on
+	 * pre-Haswell/LPT generation */
+	if (HAS_PCH_LPT(dev)) {
+		DRM_DEBUG_KMS("LPT detected: no PLL for pipe %d necessary\n",
+				pipe);
+	} else if (!is_cpu_edp) {
+		struct intel_pch_pll *pll;
+
+		pll = intel_get_pch_pll(intel_crtc, dpll, fp);
+		if (pll == NULL) {
+			DRM_DEBUG_DRIVER("failed to find PLL for pipe %d\n",
+					 pipe);
+			return -EINVAL;
+		}
+	} else
+		intel_put_pch_pll(intel_crtc);
+
+	/* The LVDS pin pair needs to be on before the DPLLs are enabled.
+	 * This is an exception to the general rule that mode_set doesn't turn
+	 * things on.
+	 */
+	if (is_lvds) {
+		temp = I915_READ(PCH_LVDS);
+		temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
+		if (HAS_PCH_CPT(dev)) {
+			temp &= ~PORT_TRANS_SEL_MASK;
+			temp |= PORT_TRANS_SEL_CPT(pipe);
+		} else {
+			if (pipe == 1)
+				temp |= LVDS_PIPEB_SELECT;
+			else
+				temp &= ~LVDS_PIPEB_SELECT;
+		}
+
+		/* set the corresponsding LVDS_BORDER bit */
+		temp |= dev_priv->lvds_border_bits;
+		/* Set the B0-B3 data pairs corresponding to whether we're going to
+		 * set the DPLLs for dual-channel mode or not.
+		 */
+		if (clock.p2 == 7)
+			temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
+		else
+			temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
+
+		/* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
+		 * appropriately here, but we need to look more thoroughly into how
+		 * panels behave in the two modes.
+		 */
+		temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
+		if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
+			temp |= LVDS_HSYNC_POLARITY;
+		if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
+			temp |= LVDS_VSYNC_POLARITY;
+		I915_WRITE(PCH_LVDS, temp);
+	}
+
+	if (is_dp && !is_cpu_edp) {
+		intel_dp_set_m_n(crtc, mode, adjusted_mode);
+	} else {
+		/* For non-DP output, clear any trans DP clock recovery setting.*/
+		I915_WRITE(TRANSDATA_M1(pipe), 0);
+		I915_WRITE(TRANSDATA_N1(pipe), 0);
+		I915_WRITE(TRANSDPLINK_M1(pipe), 0);
+		I915_WRITE(TRANSDPLINK_N1(pipe), 0);
+	}
+
+	if (intel_crtc->pch_pll) {
+		I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
+
+		/* Wait for the clocks to stabilize. */
+		POSTING_READ(intel_crtc->pch_pll->pll_reg);
+		udelay(150);
+
+		/* The pixel multiplier can only be updated once the
+		 * DPLL is enabled and the clocks are stable.
+		 *
+		 * So write it again.
+		 */
+		I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
+	}
+
+	intel_crtc->lowfreq_avail = false;
+	if (intel_crtc->pch_pll) {
+		if (is_lvds && has_reduced_clock && i915_powersave) {
+			I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp2);
+			intel_crtc->lowfreq_avail = true;
+		} else {
+			I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp);
+		}
+	}
+
+	intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
+
+	ironlake_set_m_n(crtc, mode, adjusted_mode);
+
+	if (is_cpu_edp)
+		ironlake_set_pll_edp(crtc, adjusted_mode->clock);
+
+	ironlake_set_pipeconf(crtc, adjusted_mode, dither);
+
+	intel_wait_for_vblank(dev, pipe);
+
+	/* Set up the display plane register */
+	I915_WRITE(DSPCNTR(plane), DISPPLANE_GAMMA_ENABLE);
+	POSTING_READ(DSPCNTR(plane));
+
+	ret = intel_pipe_set_base(crtc, x, y, fb);
+
+	intel_update_watermarks(dev);
+
+	intel_update_linetime_watermarks(dev, pipe, adjusted_mode);
+
+	return ret;
+}
+
 static int intel_crtc_mode_set(struct drm_crtc *crtc,
 			       struct drm_display_mode *mode,
 			       struct drm_display_mode *adjusted_mode,
@@ -7852,7 +8031,13 @@ static void intel_init_display(struct drm_device *dev)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
 	/* We always want a DPMS function */
-	if (HAS_PCH_SPLIT(dev)) {
+	if (IS_HASWELL(dev)) {
+		dev_priv->display.crtc_mode_set = haswell_crtc_mode_set;
+		dev_priv->display.crtc_enable = ironlake_crtc_enable;
+		dev_priv->display.crtc_disable = ironlake_crtc_disable;
+		dev_priv->display.off = ironlake_crtc_off;
+		dev_priv->display.update_plane = ironlake_update_plane;
+	} else if (HAS_PCH_SPLIT(dev)) {
 		dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set;
 		dev_priv->display.crtc_enable = ironlake_crtc_enable;
 		dev_priv->display.crtc_disable = ironlake_crtc_disable;
-- 
1.7.11.4