Linux CXL
 help / color / mirror / Atom feed
From: Dan Williams <dan.j.williams@intel.com>
To: linux-cxl@vger.kernel.org
Cc: jonathan.cameron@huawei.com, dave@stgolabs.net,
	dave.jiang@intel.com, alison.schofield@intel.com,
	ira.weiny@intel.com, terry.bowman@amd.com
Subject: [PATCH 8/9] cxl/port: Move endpoint component register management to cxl_port
Date: Wed, 21 Jan 2026 19:33:29 -0800	[thread overview]
Message-ID: <20260122033330.1622168-9-dan.j.williams@intel.com> (raw)
In-Reply-To: <20260122033330.1622168-1-dan.j.williams@intel.com>

In preparation for generic protocol error handling across CXL endpoints,
whether they be memory expander class devices or accelerators, drop the
endpoint component management from cxl_dev_state.

Organize all CXL port component management through the common cxl_port
driver.

Note that the end game is that drivers/cxl/core/ras.c loses all
dependencies on a 'struct cxl_dev_state' parameter and operates only on
port resources. The removal of component register mapping from cxl_pci is
an incremental step towards that.

Reviewed-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 drivers/cxl/cxlmem.h   |  4 +--
 drivers/cxl/core/ras.c |  6 ++--
 drivers/cxl/pci.c      | 63 +-----------------------------------------
 drivers/cxl/port.c     | 54 ++++++++++++++++++++++++++++++++++++
 4 files changed, 60 insertions(+), 67 deletions(-)

diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
index 434031a0c1f7..ab7201ef3ea6 100644
--- a/drivers/cxl/cxlmem.h
+++ b/drivers/cxl/cxlmem.h
@@ -415,7 +415,7 @@ struct cxl_dpa_partition {
  * @dev: The device associated with this CXL state
  * @cxlmd: The device representing the CXL.mem capabilities of @dev
  * @reg_map: component and ras register mapping parameters
- * @regs: Parsed register blocks
+ * @regs: Class device "Device" registers
  * @cxl_dvsec: Offset to the PCIe device DVSEC
  * @rcd: operating in RCD mode (CXL 3.0 9.11.8 CXL Devices Attached to an RCH)
  * @media_ready: Indicate whether the device media is usable
@@ -431,7 +431,7 @@ struct cxl_dev_state {
 	struct device *dev;
 	struct cxl_memdev *cxlmd;
 	struct cxl_register_map reg_map;
-	struct cxl_regs regs;
+	struct cxl_device_regs regs;
 	int cxl_dvsec;
 	bool rcd;
 	bool media_ready;
diff --git a/drivers/cxl/core/ras.c b/drivers/cxl/core/ras.c
index b4be9c5715a6..f6a8f4a355f1 100644
--- a/drivers/cxl/core/ras.c
+++ b/drivers/cxl/core/ras.c
@@ -255,6 +255,7 @@ bool cxl_handle_ras(struct device *dev, void __iomem *ras_base)
 void cxl_cor_error_detected(struct pci_dev *pdev)
 {
 	struct cxl_dev_state *cxlds = pci_get_drvdata(pdev);
+	struct cxl_memdev *cxlmd = cxlds->cxlmd;
 	struct device *dev = &cxlds->cxlmd->dev;
 
 	scoped_guard(device, dev) {
@@ -268,7 +269,7 @@ void cxl_cor_error_detected(struct pci_dev *pdev)
 		if (cxlds->rcd)
 			cxl_handle_rdport_errors(cxlds);
 
-		cxl_handle_cor_ras(&cxlds->cxlmd->dev, cxlds->regs.ras);
+		cxl_handle_cor_ras(&cxlds->cxlmd->dev, cxlmd->endpoint->regs.ras);
 	}
 }
 EXPORT_SYMBOL_NS_GPL(cxl_cor_error_detected, "CXL");
@@ -297,10 +298,9 @@ pci_ers_result_t cxl_error_detected(struct pci_dev *pdev,
 		 * chance the situation is recoverable dump the status of the RAS
 		 * capability registers and bounce the active state of the memdev.
 		 */
-		ue = cxl_handle_ras(&cxlds->cxlmd->dev, cxlds->regs.ras);
+		ue = cxl_handle_ras(&cxlds->cxlmd->dev, cxlmd->endpoint->regs.ras);
 	}
 
-
 	switch (state) {
 	case pci_channel_io_normal:
 		if (ue) {
diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
index b7f694bda913..acb0eb2a13c3 100644
--- a/drivers/cxl/pci.c
+++ b/drivers/cxl/pci.c
@@ -535,52 +535,6 @@ static int cxl_pci_setup_regs(struct pci_dev *pdev, enum cxl_regloc_type type,
 	return cxl_setup_regs(map);
 }
 
-static int cxl_pci_ras_unmask(struct pci_dev *pdev)
-{
-	struct cxl_dev_state *cxlds = pci_get_drvdata(pdev);
-	void __iomem *addr;
-	u32 orig_val, val, mask;
-	u16 cap;
-	int rc;
-
-	if (!cxlds->regs.ras) {
-		dev_dbg(&pdev->dev, "No RAS registers.\n");
-		return 0;
-	}
-
-	/* BIOS has PCIe AER error control */
-	if (!pcie_aer_is_native(pdev))
-		return 0;
-
-	rc = pcie_capability_read_word(pdev, PCI_EXP_DEVCTL, &cap);
-	if (rc)
-		return rc;
-
-	if (cap & PCI_EXP_DEVCTL_URRE) {
-		addr = cxlds->regs.ras + CXL_RAS_UNCORRECTABLE_MASK_OFFSET;
-		orig_val = readl(addr);
-
-		mask = CXL_RAS_UNCORRECTABLE_MASK_MASK |
-		       CXL_RAS_UNCORRECTABLE_MASK_F256B_MASK;
-		val = orig_val & ~mask;
-		writel(val, addr);
-		dev_dbg(&pdev->dev,
-			"Uncorrectable RAS Errors Mask: %#x -> %#x\n",
-			orig_val, val);
-	}
-
-	if (cap & PCI_EXP_DEVCTL_CERE) {
-		addr = cxlds->regs.ras + CXL_RAS_CORRECTABLE_MASK_OFFSET;
-		orig_val = readl(addr);
-		val = orig_val & ~CXL_RAS_CORRECTABLE_MASK_MASK;
-		writel(val, addr);
-		dev_dbg(&pdev->dev, "Correctable RAS Errors Mask: %#x -> %#x\n",
-			orig_val, val);
-	}
-
-	return 0;
-}
-
 static void free_event_buf(void *buf)
 {
 	kvfree(buf);
@@ -912,13 +866,6 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	unsigned int i;
 	bool irq_avail;
 
-	/*
-	 * Double check the anonymous union trickery in struct cxl_regs
-	 * FIXME switch to struct_group()
-	 */
-	BUILD_BUG_ON(offsetof(struct cxl_regs, memdev) !=
-		     offsetof(struct cxl_regs, device_regs.memdev));
-
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
@@ -942,7 +889,7 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (rc)
 		return rc;
 
-	rc = cxl_map_device_regs(&map, &cxlds->regs.device_regs);
+	rc = cxl_map_device_regs(&map, &cxlds->regs);
 	if (rc)
 		return rc;
 
@@ -957,11 +904,6 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	else if (!cxlds->reg_map.component_map.ras.valid)
 		dev_dbg(&pdev->dev, "RAS registers not found\n");
 
-	rc = cxl_map_component_regs(&cxlds->reg_map, &cxlds->regs.component,
-				    BIT(CXL_CM_CAP_CAP_ID_RAS));
-	if (rc)
-		dev_dbg(&pdev->dev, "Failed to map RAS capability.\n");
-
 	rc = cxl_pci_type3_init_mailbox(cxlds);
 	if (rc)
 		return rc;
@@ -1052,9 +994,6 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (rc)
 		return rc;
 
-	if (cxl_pci_ras_unmask(pdev))
-		dev_dbg(&pdev->dev, "No RAS reporting unmasked\n");
-
 	pci_save_state(pdev);
 
 	return rc;
diff --git a/drivers/cxl/port.c b/drivers/cxl/port.c
index 50a643cb3e04..57b01f3bb750 100644
--- a/drivers/cxl/port.c
+++ b/drivers/cxl/port.c
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /* Copyright(c) 2022 Intel Corporation. All rights reserved. */
+#include <linux/aer.h>
 #include <linux/device.h>
 #include <linux/module.h>
 #include <linux/slab.h>
@@ -68,6 +69,55 @@ static int cxl_switch_port_probe(struct cxl_port *port)
 	return 0;
 }
 
+static int cxl_ras_unmask(struct cxl_port *port)
+{
+	struct pci_dev *pdev;
+	void __iomem *addr;
+	u32 orig_val, val, mask;
+	u16 cap;
+	int rc;
+
+	if (!dev_is_pci(port->uport_dev))
+		return 0;
+	pdev = to_pci_dev(port->uport_dev);
+
+	if (!port->regs.ras) {
+		pci_dbg(pdev, "No RAS registers.\n");
+		return 0;
+	}
+
+	/* BIOS has PCIe AER error control */
+	if (!pcie_aer_is_native(pdev))
+		return 0;
+
+	rc = pcie_capability_read_word(pdev, PCI_EXP_DEVCTL, &cap);
+	if (rc)
+		return rc;
+
+	if (cap & PCI_EXP_DEVCTL_URRE) {
+		addr = port->regs.ras + CXL_RAS_UNCORRECTABLE_MASK_OFFSET;
+		orig_val = readl(addr);
+
+		mask = CXL_RAS_UNCORRECTABLE_MASK_MASK |
+		       CXL_RAS_UNCORRECTABLE_MASK_F256B_MASK;
+		val = orig_val & ~mask;
+		writel(val, addr);
+		pci_dbg(pdev, "Uncorrectable RAS Errors Mask: %#x -> %#x\n",
+			orig_val, val);
+	}
+
+	if (cap & PCI_EXP_DEVCTL_CERE) {
+		addr = port->regs.ras + CXL_RAS_CORRECTABLE_MASK_OFFSET;
+		orig_val = readl(addr);
+		val = orig_val & ~CXL_RAS_CORRECTABLE_MASK_MASK;
+		writel(val, addr);
+		pci_dbg(pdev, "Correctable RAS Errors Mask: %#x -> %#x\n",
+			orig_val, val);
+	}
+
+	return 0;
+}
+
 static int cxl_endpoint_port_probe(struct cxl_port *port)
 {
 	struct cxl_memdev *cxlmd = to_cxl_memdev(port->uport_dev);
@@ -98,6 +148,10 @@ static int cxl_endpoint_port_probe(struct cxl_port *port)
 	if (dport->rch)
 		devm_cxl_dport_rch_ras_setup(dport);
 
+	devm_cxl_port_ras_setup(port);
+	if (cxl_ras_unmask(port))
+		dev_dbg(&port->dev, "failed to unmask RAS interrupts\n");
+
 	/*
 	 * Now that all endpoint decoders are successfully enumerated, try to
 	 * assemble regions from committed decoders
-- 
2.52.0


  parent reply	other threads:[~2026-01-22  3:32 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-01-22  3:33 [PATCH 0/9] cxl/port: Unify RAS setup across port types Dan Williams
2026-01-22  3:33 ` [PATCH 1/9] cxl/port: Cleanup handling of the nr_dports 0 -> 1 transition Dan Williams
2026-01-22 11:32   ` Jonathan Cameron
2026-01-22 19:58     ` dan.j.williams
2026-01-22 16:45   ` Dave Jiang
2026-01-22  3:33 ` [PATCH 2/9] cxl/port: Reduce number of @dport variables in cxl_port_add_dport() Dan Williams
2026-01-22 11:39   ` Jonathan Cameron
2026-01-22 20:02     ` dan.j.williams
2026-01-22 16:54   ` Dave Jiang
2026-01-22  3:33 ` [PATCH 3/9] cxl/port: Cleanup dport removal with a devres group Dan Williams
2026-01-22 11:59   ` Jonathan Cameron
2026-01-22 20:43     ` dan.j.williams
2026-01-23 12:14       ` Jonathan Cameron
2026-01-23 12:24         ` Jonathan Cameron
2026-01-30 23:58         ` dan.j.williams
2026-01-22  3:33 ` [PATCH 4/9] cxl/port: Move decoder setup before dport creation Dan Williams
2026-01-22 13:07   ` Jonathan Cameron
2026-01-22 21:42     ` dan.j.williams
2026-01-22 20:38   ` Dave Jiang
2026-01-22  3:33 ` [PATCH 5/9] cxl/port: Move dport probe operations to a driver event Dan Williams
2026-01-22 14:44   ` Jonathan Cameron
2026-01-22 21:53     ` dan.j.williams
2026-01-22  3:33 ` [PATCH 6/9] cxl/port: Move dport RAS setup to dport add time Dan Williams
2026-01-22 15:00   ` Jonathan Cameron
2026-01-22 21:56     ` dan.j.williams
2026-01-22 21:06   ` Dave Jiang
2026-01-22  3:33 ` [PATCH 7/9] cxl/port: Map CXL Endpoint Port and CXL Switch Port RAS registers Dan Williams
2026-01-22 15:25   ` Jonathan Cameron
2026-01-22 22:11     ` dan.j.williams
2026-01-22  3:33 ` Dan Williams [this message]
2026-01-22 15:27   ` [PATCH 8/9] cxl/port: Move endpoint component register management to cxl_port Jonathan Cameron
2026-01-22 21:24   ` Dave Jiang
2026-01-22  3:33 ` [PATCH 9/9] cxl/port: Unify endpoint and switch port lookup Dan Williams
2026-01-22 15:32   ` Jonathan Cameron
2026-01-22 21:24   ` Dave Jiang
2026-01-22 21:42 ` [PATCH 0/9] cxl/port: Unify RAS setup across port types Bowman, Terry

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260122033330.1622168-9-dan.j.williams@intel.com \
    --to=dan.j.williams@intel.com \
    --cc=alison.schofield@intel.com \
    --cc=dave.jiang@intel.com \
    --cc=dave@stgolabs.net \
    --cc=ira.weiny@intel.com \
    --cc=jonathan.cameron@huawei.com \
    --cc=linux-cxl@vger.kernel.org \
    --cc=terry.bowman@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox