From: Manasi Navare <manasi.d.navare@intel.com>
To: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Cc: Manasi Navare <manasi.d.navare@intel.com>,
Jani Nikula <jani.nikula@intel.com>,
Rodrigo Vivi <rodrigo.vivi@intel.com>
Subject: [PATCH v6 14/28] drm/i915/dp: Do not enable PSR2 if DSC is enabled
Date: Wed, 24 Oct 2018 15:28:26 -0700 [thread overview]
Message-ID: <20181024222840.25683-15-manasi.d.navare@intel.com> (raw)
In-Reply-To: <20181024222840.25683-1-manasi.d.navare@intel.com>
If a eDP panel supports both PSR2 and VDSC, our HW cannot
support both at a time. Give priority to PSR2 if a requested
resolution can be supported without compression else enable
VDSC and keep PSR2 disabled.
v3:
* Rebase
v2:
* Add warning for DSC and PSR2 enabled together (DK)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
---
drivers/gpu/drm/i915/intel_psr.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index 423cdf84059c..37ad21e859af 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -71,9 +71,9 @@ static bool psr_global_enabled(u32 debug)
static bool intel_psr2_enabled(struct drm_i915_private *dev_priv,
const struct intel_crtc_state *crtc_state)
{
- /* Disable PSR2 by default for all platforms */
- if (i915_modparams.enable_psr == -1)
- return false;
+ /* Cannot enable DSC and PSR2 simultaneously */
+ WARN_ON(crtc_state->dsc_params.compression_enable &&
+ crtc_state->has_psr2);
switch (dev_priv->psr.debug & I915_PSR_DEBUG_MODE_MASK) {
case I915_PSR_DEBUG_FORCE_PSR1:
@@ -463,6 +463,16 @@ static bool intel_psr2_config_valid(struct intel_dp *intel_dp,
if (!dev_priv->psr.sink_psr2_support)
return false;
+ /*
+ * DSC and PSR2 cannot be enabled simultaneously. If a requested
+ * resolution requires DSC to be enabled, priority is given to DSC
+ * over PSR2.
+ */
+ if (crtc_state->dsc_params.compression_enable) {
+ DRM_DEBUG_KMS("PSR2 cannot be enabled since DSC is enabled\n");
+ return false;
+ }
+
if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) {
psr_max_h = 4096;
psr_max_v = 2304;
--
2.18.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2018-10-24 22:28 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-24 22:28 [PATCH v6 00/28] Display Stream Compression enabling on eDP/DP Manasi Navare
2018-10-24 22:28 ` [PATCH v6 01/28] drm/i915/dsc: Add slice_row_per_frame in DSC PPS programming Manasi Navare
2018-10-24 22:28 ` [PATCH v6 02/28] drm/dp: Add DP DSC DPCD receiver capability size define and missing SHIFT Manasi Navare
2018-10-24 22:28 ` [PATCH v6 03/28] drm/i915/dp: Cache the DP/eDP DSC DPCD register set on Hotplug/eDP Init Manasi Navare
2018-10-24 22:28 ` [PATCH v6 04/28] drm/dp: DRM DP helper/macros to get DP sink DSC parameters Manasi Navare
2018-12-19 18:54 ` [Intel-gfx] " Daniel Vetter
2019-01-30 11:06 ` Daniel Vetter
2019-01-30 18:06 ` Sean Paul
2019-01-30 18:27 ` Manasi Navare
2019-01-30 18:26 ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 05/28] drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC Manasi Navare
2018-10-24 22:28 ` [PATCH v6 06/28] drm/i915/dp: Validate modes using max Output BPP and slice count when DSC supported Manasi Navare
2018-10-24 22:28 ` [PATCH v6 07/28] drm/dp: Define payload size for DP SDP PPS packet Manasi Navare
2018-10-24 22:28 ` [PATCH v6 08/28] drm/dsc: Define Display Stream Compression PPS infoframe Manasi Navare
2018-11-01 16:42 ` Ville Syrjälä
2018-11-01 16:53 ` Ville Syrjälä
2018-11-01 21:48 ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 09/28] drm/dsc: Define VESA Display Stream Compression Capabilities Manasi Navare
2018-10-24 22:28 ` [PATCH v6 10/28] drm/dsc: Define Rate Control values that do not change over configurations Manasi Navare
2018-10-24 22:28 ` [PATCH v6 11/28] drm/dsc: Add helpers for DSC picture parameter set infoframes Manasi Navare
2018-11-01 16:46 ` Ville Syrjälä
2018-11-01 23:54 ` Manasi Navare
2018-11-02 0:23 ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 12/28] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state Manasi Navare
2018-10-30 23:53 ` Manasi Navare
2018-10-31 13:10 ` Ville Syrjälä
2018-10-31 16:05 ` Manasi Navare
2018-10-31 16:13 ` Ville Syrjälä
2018-10-24 22:28 ` [PATCH v6 13/28] drm/i915/dp: Compute DSC pipe config in atomic check Manasi Navare
2018-10-29 20:30 ` Ville Syrjälä
2018-10-29 20:34 ` Ville Syrjälä
2018-10-29 23:08 ` Manasi Navare
2018-10-30 11:46 ` Ville Syrjälä
2018-10-29 21:42 ` Manasi Navare
2018-10-29 22:12 ` Manasi Navare
2018-10-30 11:41 ` Ville Syrjälä
2018-10-24 22:28 ` Manasi Navare [this message]
2018-10-24 22:28 ` [PATCH v6 15/28] drm/dsc: Define the DSC 1.1 and 1.2 Line Buffer depth constants Manasi Navare
2018-10-24 22:28 ` [PATCH v6 16/28] drm/i915/dsc: Define & Compute VESA DSC params Manasi Navare
2018-10-24 22:28 ` [PATCH v6 17/28] drm/i915/dsc: Compute Rate Control parameters for DSC Manasi Navare
2018-10-24 22:28 ` [PATCH v6 18/28] drm/i915/dp: Enable/Disable DSC in DP Sink Manasi Navare
2018-10-25 14:03 ` Ville Syrjälä
2018-10-25 20:11 ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 19/28] drm/i915/dsc: Add a power domain for VDSC on eDP/MIPI DSI Manasi Navare
2018-10-24 22:28 ` [PATCH v6 20/28] drm/i915/dp: Configure i915 Picture parameter Set registers during DSC enabling Manasi Navare
2018-10-24 22:28 ` [PATCH v6 21/28] drm/i915/dp: Use the existing write_infoframe() for DSC PPS SDPs Manasi Navare
2018-10-25 14:08 ` Ville Syrjälä
2018-10-29 19:24 ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 22/28] drm/i915/dp: Populate DSC PPS SDP and send PPS infoframes Manasi Navare
2018-10-25 14:09 ` Ville Syrjälä
2018-10-25 20:07 ` Manasi Navare
2018-10-30 23:45 ` Manasi Navare
2018-10-31 13:09 ` Ville Syrjälä
2018-10-24 22:28 ` [PATCH v6 23/28] drm/i915/icl: Add Display Stream Splitter control registers Manasi Navare
2018-10-24 22:28 ` [PATCH v6 24/28] drm/i915/dp: Configure Display stream splitter registers during DSC enable Manasi Navare
2018-10-25 14:15 ` Ville Syrjälä
2018-10-25 20:05 ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 25/28] drm/i915/dp: Disable DSC in source by disabling DSS CTL bits Manasi Navare
2018-10-25 14:16 ` Ville Syrjälä
2018-10-25 19:55 ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 26/28] drm/i915/dsc: Enable and disable appropriate power wells for VDSC Manasi Navare
2018-10-25 14:22 ` Ville Syrjälä
2018-10-25 19:41 ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 27/28] drm/i915/dsc: Add Per connector debugfs node for DSC support/enable Manasi Navare
2018-10-24 22:28 ` Lyude Paul
2018-10-25 20:12 ` Manasi Navare
2018-10-29 20:39 ` Ville Syrjälä
2018-10-29 21:35 ` Manasi Navare
2018-10-30 11:26 ` Ville Syrjälä
2018-10-24 22:28 ` [PATCH v6 28/28] drm/i915/dsc: Force DSC enable if requested by IGT/userspace Manasi Navare
2018-10-24 22:39 ` ✗ Fi.CI.CHECKPATCH: warning for Display Stream Compression enabling on eDP/DP (rev6) Patchwork
2018-10-24 22:50 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-10-24 23:02 ` ✗ Fi.CI.BAT: failure " Patchwork
2018-10-31 23:36 ` [PATCH v6 00/28] Display Stream Compression enabling on eDP/DP Manasi Navare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181024222840.25683-15-manasi.d.navare@intel.com \
--to=manasi.d.navare@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
--cc=rodrigo.vivi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox