public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Manasi Navare <manasi.d.navare@intel.com>
To: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Cc: Madhav Chauhan <madhav.chauhan@intel.com>,
	Manasi Navare <manasi.d.navare@intel.com>,
	"Srivatsa, Anusha" <anusha.srivatsa@intel.com>,
	Rodrigo Vivi <rodrigo.vivi@intel.com>
Subject: [PATCH v6 23/28] drm/i915/icl: Add Display Stream Splitter control registers
Date: Wed, 24 Oct 2018 15:28:35 -0700	[thread overview]
Message-ID: <20181024222840.25683-24-manasi.d.navare@intel.com> (raw)
In-Reply-To: <20181024222840.25683-1-manasi.d.navare@intel.com>

From: "Srivatsa, Anusha" <anusha.srivatsa@intel.com>

Add defines for DSS_CTL registers.
These registers specify the big joiner, splitter,
overlap pixels and info regarding display stream
compression enabled on left or right branch.

v3 (From Manasi):
- Change the hex values to lower case (Madhav)
- Use BIT macro (Manasi)
v2:
- Add define to conditionally check the buffer target depth (James Ausmus)

Suggested-by: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 0ecdc95f56d8..e85f53cb9cdd 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -7721,6 +7721,39 @@ enum {
 #define RC_MAX_QP_SHIFT				5
 #define RC_MIN_QP_SHIFT				0
 
+/* Display Stream Splitter Control */
+#define DSS_CTL1				_MMIO(0x67400)
+#define  SPLITTER_ENABLE			(1 << 31)
+#define  JOINER_ENABLE				(1 << 30)
+#define  DUAL_LINK_MODE_INTERLEAVE		(1 << 24)
+#define  DUAL_LINK_MODE_FRONTBACK		(0 << 24)
+#define  OVERLAP_PIXELS_MASK			(0xf << 16)
+#define  OVERLAP_PIXELS(pixels)			((pixels) << 16)
+#define  LEFT_DL_BUF_TARGET_DEPTH_MASK		(0xfff << 0)
+#define  LEFT_DL_BUF_TARGET_DEPTH(pixels)	((pixels) << 0)
+#define  MAX_DL_BUFFER_TARGET_DEPTH		0x5a0
+
+#define DSS_CTL2				_MMIO(0x67404)
+#define  LEFT_BRANCH_VDSC_ENABLE		(1 << 31)
+#define  RIGHT_BRANCH_VDSC_ENABLE		(1 << 15)
+#define  RIGHT_DL_BUF_TARGET_DEPTH_MASK		(0xfff << 0)
+#define  RIGHT_DL_BUF_TARGET_DEPTH(pixels)	((pixels) << 0)
+
+#define _ICL_PIPE_DSS_CTL1_PB			0x78200
+#define _ICL_PIPE_DSS_CTL1_PC			0x78400
+#define ICL_PIPE_DSS_CTL1(pipe)			_MMIO_PIPE((pipe) - PIPE_B, \
+							   _ICL_PIPE_DSS_CTL1_PB, \
+							   _ICL_PIPE_DSS_CTL1_PC)
+#define  BIG_JOINER_ENABLE			(1 << 29)
+#define  MASTER_BIG_JOINER_ENABLE		(1 << 28)
+#define  VGA_CENTERING_ENABLE			(1 << 27)
+
+#define _ICL_PIPE_DSS_CTL2_PB			0x78204
+#define _ICL_PIPE_DSS_CTL2_PC			0x78404
+#define ICL_PIPE_DSS_CTL2(pipe)			_MMIO_PIPE((pipe) - PIPE_B, \
+							   _ICL_PIPE_DSS_CTL2_PB, \
+							   _ICL_PIPE_DSS_CTL2_PC)
+
 #define DSCA_RC_RANGE_PARAMETERS_1		_MMIO(0x6B248)
 #define DSCA_RC_RANGE_PARAMETERS_1_UDW		_MMIO(0x6B248 + 4)
 #define DSCC_RC_RANGE_PARAMETERS_1		_MMIO(0x6BA48)
-- 
2.18.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2018-10-24 22:28 UTC|newest]

Thread overview: 74+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-24 22:28 [PATCH v6 00/28] Display Stream Compression enabling on eDP/DP Manasi Navare
2018-10-24 22:28 ` [PATCH v6 01/28] drm/i915/dsc: Add slice_row_per_frame in DSC PPS programming Manasi Navare
2018-10-24 22:28 ` [PATCH v6 02/28] drm/dp: Add DP DSC DPCD receiver capability size define and missing SHIFT Manasi Navare
2018-10-24 22:28 ` [PATCH v6 03/28] drm/i915/dp: Cache the DP/eDP DSC DPCD register set on Hotplug/eDP Init Manasi Navare
2018-10-24 22:28 ` [PATCH v6 04/28] drm/dp: DRM DP helper/macros to get DP sink DSC parameters Manasi Navare
2018-12-19 18:54   ` [Intel-gfx] " Daniel Vetter
2019-01-30 11:06     ` Daniel Vetter
2019-01-30 18:06       ` Sean Paul
2019-01-30 18:27         ` Manasi Navare
2019-01-30 18:26       ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 05/28] drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC Manasi Navare
2018-10-24 22:28 ` [PATCH v6 06/28] drm/i915/dp: Validate modes using max Output BPP and slice count when DSC supported Manasi Navare
2018-10-24 22:28 ` [PATCH v6 07/28] drm/dp: Define payload size for DP SDP PPS packet Manasi Navare
2018-10-24 22:28 ` [PATCH v6 08/28] drm/dsc: Define Display Stream Compression PPS infoframe Manasi Navare
2018-11-01 16:42   ` Ville Syrjälä
2018-11-01 16:53     ` Ville Syrjälä
2018-11-01 21:48     ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 09/28] drm/dsc: Define VESA Display Stream Compression Capabilities Manasi Navare
2018-10-24 22:28 ` [PATCH v6 10/28] drm/dsc: Define Rate Control values that do not change over configurations Manasi Navare
2018-10-24 22:28 ` [PATCH v6 11/28] drm/dsc: Add helpers for DSC picture parameter set infoframes Manasi Navare
2018-11-01 16:46   ` Ville Syrjälä
2018-11-01 23:54     ` Manasi Navare
2018-11-02  0:23       ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 12/28] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state Manasi Navare
2018-10-30 23:53   ` Manasi Navare
2018-10-31 13:10     ` Ville Syrjälä
2018-10-31 16:05       ` Manasi Navare
2018-10-31 16:13         ` Ville Syrjälä
2018-10-24 22:28 ` [PATCH v6 13/28] drm/i915/dp: Compute DSC pipe config in atomic check Manasi Navare
2018-10-29 20:30   ` Ville Syrjälä
2018-10-29 20:34     ` Ville Syrjälä
2018-10-29 23:08       ` Manasi Navare
2018-10-30 11:46         ` Ville Syrjälä
2018-10-29 21:42     ` Manasi Navare
2018-10-29 22:12     ` Manasi Navare
2018-10-30 11:41       ` Ville Syrjälä
2018-10-24 22:28 ` [PATCH v6 14/28] drm/i915/dp: Do not enable PSR2 if DSC is enabled Manasi Navare
2018-10-24 22:28 ` [PATCH v6 15/28] drm/dsc: Define the DSC 1.1 and 1.2 Line Buffer depth constants Manasi Navare
2018-10-24 22:28 ` [PATCH v6 16/28] drm/i915/dsc: Define & Compute VESA DSC params Manasi Navare
2018-10-24 22:28 ` [PATCH v6 17/28] drm/i915/dsc: Compute Rate Control parameters for DSC Manasi Navare
2018-10-24 22:28 ` [PATCH v6 18/28] drm/i915/dp: Enable/Disable DSC in DP Sink Manasi Navare
2018-10-25 14:03   ` Ville Syrjälä
2018-10-25 20:11     ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 19/28] drm/i915/dsc: Add a power domain for VDSC on eDP/MIPI DSI Manasi Navare
2018-10-24 22:28 ` [PATCH v6 20/28] drm/i915/dp: Configure i915 Picture parameter Set registers during DSC enabling Manasi Navare
2018-10-24 22:28 ` [PATCH v6 21/28] drm/i915/dp: Use the existing write_infoframe() for DSC PPS SDPs Manasi Navare
2018-10-25 14:08   ` Ville Syrjälä
2018-10-29 19:24     ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 22/28] drm/i915/dp: Populate DSC PPS SDP and send PPS infoframes Manasi Navare
2018-10-25 14:09   ` Ville Syrjälä
2018-10-25 20:07     ` Manasi Navare
2018-10-30 23:45     ` Manasi Navare
2018-10-31 13:09       ` Ville Syrjälä
2018-10-24 22:28 ` Manasi Navare [this message]
2018-10-24 22:28 ` [PATCH v6 24/28] drm/i915/dp: Configure Display stream splitter registers during DSC enable Manasi Navare
2018-10-25 14:15   ` Ville Syrjälä
2018-10-25 20:05     ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 25/28] drm/i915/dp: Disable DSC in source by disabling DSS CTL bits Manasi Navare
2018-10-25 14:16   ` Ville Syrjälä
2018-10-25 19:55     ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 26/28] drm/i915/dsc: Enable and disable appropriate power wells for VDSC Manasi Navare
2018-10-25 14:22   ` Ville Syrjälä
2018-10-25 19:41     ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 27/28] drm/i915/dsc: Add Per connector debugfs node for DSC support/enable Manasi Navare
2018-10-24 22:28   ` Lyude Paul
2018-10-25 20:12     ` Manasi Navare
2018-10-29 20:39   ` Ville Syrjälä
2018-10-29 21:35     ` Manasi Navare
2018-10-30 11:26       ` Ville Syrjälä
2018-10-24 22:28 ` [PATCH v6 28/28] drm/i915/dsc: Force DSC enable if requested by IGT/userspace Manasi Navare
2018-10-24 22:39 ` ✗ Fi.CI.CHECKPATCH: warning for Display Stream Compression enabling on eDP/DP (rev6) Patchwork
2018-10-24 22:50 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-10-24 23:02 ` ✗ Fi.CI.BAT: failure " Patchwork
2018-10-31 23:36 ` [PATCH v6 00/28] Display Stream Compression enabling on eDP/DP Manasi Navare

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181024222840.25683-24-manasi.d.navare@intel.com \
    --to=manasi.d.navare@intel.com \
    --cc=anusha.srivatsa@intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=madhav.chauhan@intel.com \
    --cc=rodrigo.vivi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox