From: Manasi Navare <manasi.d.navare@intel.com>
To: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Subject: [PATCH v6 27/28] drm/i915/dsc: Add Per connector debugfs node for DSC support/enable
Date: Wed, 24 Oct 2018 15:28:39 -0700 [thread overview]
Message-ID: <20181024222840.25683-28-manasi.d.navare@intel.com> (raw)
In-Reply-To: <20181024222840.25683-1-manasi.d.navare@intel.com>
DSC can be supported per DP connector. This patch adds a per connector
debugfs node to expose DSC support capability by the kernel.
The same node can be used from userspace to force DSC enable.
v2:
* Use kstrtobool_from_user to avoid explicit error checking (Lyude)
* Rebase on drm-tip (Manasi)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
---
drivers/gpu/drm/i915/i915_debugfs.c | 71 ++++++++++++++++++++++++++++-
drivers/gpu/drm/i915/intel_dp.c | 1 +
drivers/gpu/drm/i915/intel_drv.h | 3 ++
3 files changed, 74 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 5cadfcd03ea9..6e631f08dd4b 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -4999,6 +4999,72 @@ static int i915_hdcp_sink_capability_show(struct seq_file *m, void *data)
}
DEFINE_SHOW_ATTRIBUTE(i915_hdcp_sink_capability);
+static int i915_dsc_support_show(struct seq_file *m, void *data)
+{
+ struct drm_connector *connector = m->private;
+ struct intel_encoder *encoder = intel_attached_encoder(connector);
+ struct intel_dp *intel_dp =
+ enc_to_intel_dp(&encoder->base);
+ struct intel_crtc *crtc;
+ struct intel_crtc_state *crtc_state;
+
+ crtc = to_intel_crtc(encoder->base.crtc);
+ crtc_state = to_intel_crtc_state(crtc->base.state);
+ drm_modeset_lock(&crtc->base.mutex, NULL);
+ seq_printf(m, "Enabled: %s\n",
+ yesno(crtc_state->dsc_params.compression_enable));
+ seq_printf(m, "Supported: %s\n",
+ yesno(drm_dp_sink_supports_dsc(intel_dp->dsc_dpcd)));
+ drm_modeset_unlock(&crtc->base.mutex);
+
+ return 0;
+}
+
+static ssize_t i915_dsc_support_write(struct file *file,
+ const char __user *ubuf,
+ size_t len, loff_t *offp)
+{
+ bool dsc_enable = false;
+ int ret;
+ struct drm_connector *connector =
+ ((struct seq_file *)file->private_data)->private;
+ struct intel_encoder *encoder = intel_attached_encoder(connector);
+ struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
+
+ if (len == 0)
+ return 0;
+
+ DRM_DEBUG_DRIVER("Copied %d bytes from user to force DSC\n",
+ (unsigned int)len);
+
+ ret = kstrtobool_from_user(ubuf, len, &dsc_enable);
+ if (ret < 0)
+ return ret;
+
+ DRM_DEBUG_DRIVER("Got %s for DSC Enable\n",
+ (dsc_enable) ? "true" : "false");
+ intel_dp->force_dsc_en = dsc_enable;
+
+ *offp += len;
+ return len;
+}
+
+static int i915_dsc_support_open(struct inode *inode,
+ struct file *file)
+{
+ return single_open(file, i915_dsc_support_show,
+ inode->i_private);
+}
+
+static const struct file_operations i915_dsc_support_fops = {
+ .owner = THIS_MODULE,
+ .open = i915_dsc_support_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .write = i915_dsc_support_write
+};
+
/**
* i915_debugfs_connector_add - add i915 specific connector debugfs files
* @connector: pointer to a registered drm_connector
@@ -5017,9 +5083,12 @@ int i915_debugfs_connector_add(struct drm_connector *connector)
return -ENODEV;
if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
- connector->connector_type == DRM_MODE_CONNECTOR_eDP)
+ connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
debugfs_create_file("i915_dpcd", S_IRUGO, root,
connector, &i915_dpcd_fops);
+ debugfs_create_file("i915_dsc_support", S_IRUGO, root,
+ connector, &i915_dsc_support_fops);
+ }
if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
debugfs_create_file("i915_panel_timings", S_IRUGO, root,
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 72e6605f0ed7..0b5939992c2b 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2287,6 +2287,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK)
return false;
+ DRM_DEBUG_KMS("Force DSC en = %d\n", intel_dp->force_dsc_en);
if (!intel_dp_compute_link_config(encoder, pipe_config))
return false;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 4f5d17bcd54e..16bbc3768e02 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1196,6 +1196,9 @@ struct intel_dp {
/* Displayport compliance testing */
struct intel_dp_compliance compliance;
+
+ /* Display stream compression testing */
+ bool force_dsc_en;
};
enum lspcon_vendor {
--
2.18.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-10-24 22:28 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-24 22:28 [PATCH v6 00/28] Display Stream Compression enabling on eDP/DP Manasi Navare
2018-10-24 22:28 ` [PATCH v6 01/28] drm/i915/dsc: Add slice_row_per_frame in DSC PPS programming Manasi Navare
2018-10-24 22:28 ` [PATCH v6 02/28] drm/dp: Add DP DSC DPCD receiver capability size define and missing SHIFT Manasi Navare
2018-10-24 22:28 ` [PATCH v6 03/28] drm/i915/dp: Cache the DP/eDP DSC DPCD register set on Hotplug/eDP Init Manasi Navare
2018-10-24 22:28 ` [PATCH v6 04/28] drm/dp: DRM DP helper/macros to get DP sink DSC parameters Manasi Navare
2018-12-19 18:54 ` [Intel-gfx] " Daniel Vetter
2019-01-30 11:06 ` Daniel Vetter
2019-01-30 18:06 ` Sean Paul
2019-01-30 18:27 ` Manasi Navare
2019-01-30 18:26 ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 05/28] drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC Manasi Navare
2018-10-24 22:28 ` [PATCH v6 06/28] drm/i915/dp: Validate modes using max Output BPP and slice count when DSC supported Manasi Navare
2018-10-24 22:28 ` [PATCH v6 07/28] drm/dp: Define payload size for DP SDP PPS packet Manasi Navare
2018-10-24 22:28 ` [PATCH v6 08/28] drm/dsc: Define Display Stream Compression PPS infoframe Manasi Navare
2018-11-01 16:42 ` Ville Syrjälä
2018-11-01 16:53 ` Ville Syrjälä
2018-11-01 21:48 ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 09/28] drm/dsc: Define VESA Display Stream Compression Capabilities Manasi Navare
2018-10-24 22:28 ` [PATCH v6 10/28] drm/dsc: Define Rate Control values that do not change over configurations Manasi Navare
2018-10-24 22:28 ` [PATCH v6 11/28] drm/dsc: Add helpers for DSC picture parameter set infoframes Manasi Navare
2018-11-01 16:46 ` Ville Syrjälä
2018-11-01 23:54 ` Manasi Navare
2018-11-02 0:23 ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 12/28] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state Manasi Navare
2018-10-30 23:53 ` Manasi Navare
2018-10-31 13:10 ` Ville Syrjälä
2018-10-31 16:05 ` Manasi Navare
2018-10-31 16:13 ` Ville Syrjälä
2018-10-24 22:28 ` [PATCH v6 13/28] drm/i915/dp: Compute DSC pipe config in atomic check Manasi Navare
2018-10-29 20:30 ` Ville Syrjälä
2018-10-29 20:34 ` Ville Syrjälä
2018-10-29 23:08 ` Manasi Navare
2018-10-30 11:46 ` Ville Syrjälä
2018-10-29 21:42 ` Manasi Navare
2018-10-29 22:12 ` Manasi Navare
2018-10-30 11:41 ` Ville Syrjälä
2018-10-24 22:28 ` [PATCH v6 14/28] drm/i915/dp: Do not enable PSR2 if DSC is enabled Manasi Navare
2018-10-24 22:28 ` [PATCH v6 15/28] drm/dsc: Define the DSC 1.1 and 1.2 Line Buffer depth constants Manasi Navare
2018-10-24 22:28 ` [PATCH v6 16/28] drm/i915/dsc: Define & Compute VESA DSC params Manasi Navare
2018-10-24 22:28 ` [PATCH v6 17/28] drm/i915/dsc: Compute Rate Control parameters for DSC Manasi Navare
2018-10-24 22:28 ` [PATCH v6 18/28] drm/i915/dp: Enable/Disable DSC in DP Sink Manasi Navare
2018-10-25 14:03 ` Ville Syrjälä
2018-10-25 20:11 ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 19/28] drm/i915/dsc: Add a power domain for VDSC on eDP/MIPI DSI Manasi Navare
2018-10-24 22:28 ` [PATCH v6 20/28] drm/i915/dp: Configure i915 Picture parameter Set registers during DSC enabling Manasi Navare
2018-10-24 22:28 ` [PATCH v6 21/28] drm/i915/dp: Use the existing write_infoframe() for DSC PPS SDPs Manasi Navare
2018-10-25 14:08 ` Ville Syrjälä
2018-10-29 19:24 ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 22/28] drm/i915/dp: Populate DSC PPS SDP and send PPS infoframes Manasi Navare
2018-10-25 14:09 ` Ville Syrjälä
2018-10-25 20:07 ` Manasi Navare
2018-10-30 23:45 ` Manasi Navare
2018-10-31 13:09 ` Ville Syrjälä
2018-10-24 22:28 ` [PATCH v6 23/28] drm/i915/icl: Add Display Stream Splitter control registers Manasi Navare
2018-10-24 22:28 ` [PATCH v6 24/28] drm/i915/dp: Configure Display stream splitter registers during DSC enable Manasi Navare
2018-10-25 14:15 ` Ville Syrjälä
2018-10-25 20:05 ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 25/28] drm/i915/dp: Disable DSC in source by disabling DSS CTL bits Manasi Navare
2018-10-25 14:16 ` Ville Syrjälä
2018-10-25 19:55 ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 26/28] drm/i915/dsc: Enable and disable appropriate power wells for VDSC Manasi Navare
2018-10-25 14:22 ` Ville Syrjälä
2018-10-25 19:41 ` Manasi Navare
2018-10-24 22:28 ` Manasi Navare [this message]
2018-10-24 22:28 ` [PATCH v6 27/28] drm/i915/dsc: Add Per connector debugfs node for DSC support/enable Lyude Paul
2018-10-25 20:12 ` Manasi Navare
2018-10-29 20:39 ` Ville Syrjälä
2018-10-29 21:35 ` Manasi Navare
2018-10-30 11:26 ` Ville Syrjälä
2018-10-24 22:28 ` [PATCH v6 28/28] drm/i915/dsc: Force DSC enable if requested by IGT/userspace Manasi Navare
2018-10-24 22:39 ` ✗ Fi.CI.CHECKPATCH: warning for Display Stream Compression enabling on eDP/DP (rev6) Patchwork
2018-10-24 22:50 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-10-24 23:02 ` ✗ Fi.CI.BAT: failure " Patchwork
2018-10-31 23:36 ` [PATCH v6 00/28] Display Stream Compression enabling on eDP/DP Manasi Navare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181024222840.25683-28-manasi.d.navare@intel.com \
--to=manasi.d.navare@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=rodrigo.vivi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox