From: Manasi Navare <manasi.d.navare@intel.com>
To: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Subject: [PATCH v6 25/28] drm/i915/dp: Disable DSC in source by disabling DSS CTL bits
Date: Wed, 24 Oct 2018 15:28:37 -0700 [thread overview]
Message-ID: <20181024222840.25683-26-manasi.d.navare@intel.com> (raw)
In-Reply-To: <20181024222840.25683-1-manasi.d.navare@intel.com>
1. Disable Left/right VDSC branch in DSS Ctrl reg
depending on the number of VDSC engines being used
2. Disable joiner in DSS Ctrl reg
v3 (From Manasi):
* Add Disable PG2 for VDSC on eDP
v2 (From Manasi):
* Use old_crtc_state to find dsc params
* Add a condition to disable only if
dsc state compression is enabled
* Use correct DSS CTL regs
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Gaurav K Singh <gaurav.k.singh@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
---
drivers/gpu/drm/i915/i915_drv.h | 2 ++
drivers/gpu/drm/i915/intel_display.c | 13 +++++++++++
drivers/gpu/drm/i915/intel_vdsc.c | 33 ++++++++++++++++++++++++++++
3 files changed, 48 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 16e6bb98eb1b..e31f19a688bc 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -3489,6 +3489,8 @@ extern bool intel_set_memory_cxsr(struct drm_i915_private *dev_priv,
bool enable);
extern void intel_dsc_enable(struct intel_encoder *encoder,
struct intel_crtc_state *crtc_state);
+extern void intel_dsc_disable(struct intel_encoder *encoder,
+ struct intel_crtc_state *crtc_state);
int i915_reg_read_ioctl(struct drm_device *dev, void *data,
struct drm_file *file);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 023a9baef101..3d9d70d3314e 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5853,6 +5853,9 @@ static void haswell_crtc_disable(struct intel_crtc_state *old_crtc_state,
struct drm_i915_private *dev_priv = to_i915(crtc->dev);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
enum transcoder cpu_transcoder = old_crtc_state->cpu_transcoder;
+ struct drm_connector_state *conn_state;
+ struct drm_connector *conn;
+ int i;
intel_encoders_disable(crtc, old_crtc_state, old_state);
@@ -5869,6 +5872,16 @@ static void haswell_crtc_disable(struct intel_crtc_state *old_crtc_state,
if (!transcoder_is_dsi(cpu_transcoder))
intel_ddi_disable_transcoder_func(old_crtc_state);
+ for_each_new_connector_in_state(old_state, conn, conn_state, i) {
+ struct intel_encoder *encoder =
+ to_intel_encoder(conn_state->best_encoder);
+
+ if (conn_state->crtc != crtc)
+ continue;
+
+ intel_dsc_disable(encoder, old_crtc_state);
+ }
+
if (INTEL_GEN(dev_priv) >= 9)
skylake_scaler_disable(intel_crtc);
else
diff --git a/drivers/gpu/drm/i915/intel_vdsc.c b/drivers/gpu/drm/i915/intel_vdsc.c
index 8b46619aae15..5e76b4a44d90 100644
--- a/drivers/gpu/drm/i915/intel_vdsc.c
+++ b/drivers/gpu/drm/i915/intel_vdsc.c
@@ -1042,3 +1042,36 @@ void intel_dsc_enable(struct intel_encoder *encoder,
return;
}
+
+void intel_dsc_disable(struct intel_encoder *encoder,
+ struct intel_crtc_state *old_crtc_state)
+{
+ struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->base.crtc);
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ enum pipe pipe = crtc->pipe;
+ i915_reg_t dss_ctl1_reg, dss_ctl2_reg;
+ u32 dss_ctl1_val = 0, dss_ctl2_val = 0;
+
+ if (!old_crtc_state->dsc_params.compression_enable)
+ return;
+
+ if (encoder->type == INTEL_OUTPUT_EDP) {
+ dss_ctl1_reg = DSS_CTL1;
+ dss_ctl2_reg = DSS_CTL2;
+ } else {
+ dss_ctl1_reg = ICL_PIPE_DSS_CTL1(pipe);
+ dss_ctl2_reg = ICL_PIPE_DSS_CTL2(pipe);
+ }
+ dss_ctl1_val = I915_READ(dss_ctl1_reg);
+ if (dss_ctl1_val & JOINER_ENABLE)
+ dss_ctl1_val &= ~JOINER_ENABLE;
+ I915_WRITE(dss_ctl1_reg, dss_ctl1_val);
+
+ dss_ctl2_val = I915_READ(dss_ctl2_reg);
+ if (dss_ctl2_val & LEFT_BRANCH_VDSC_ENABLE ||
+ dss_ctl2_val & RIGHT_BRANCH_VDSC_ENABLE)
+ dss_ctl2_val &= ~(LEFT_BRANCH_VDSC_ENABLE |
+ RIGHT_BRANCH_VDSC_ENABLE);
+ I915_WRITE(dss_ctl2_reg, dss_ctl2_val);
+
+}
--
2.18.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-10-24 22:28 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-24 22:28 [PATCH v6 00/28] Display Stream Compression enabling on eDP/DP Manasi Navare
2018-10-24 22:28 ` [PATCH v6 01/28] drm/i915/dsc: Add slice_row_per_frame in DSC PPS programming Manasi Navare
2018-10-24 22:28 ` [PATCH v6 02/28] drm/dp: Add DP DSC DPCD receiver capability size define and missing SHIFT Manasi Navare
2018-10-24 22:28 ` [PATCH v6 03/28] drm/i915/dp: Cache the DP/eDP DSC DPCD register set on Hotplug/eDP Init Manasi Navare
2018-10-24 22:28 ` [PATCH v6 04/28] drm/dp: DRM DP helper/macros to get DP sink DSC parameters Manasi Navare
2018-12-19 18:54 ` [Intel-gfx] " Daniel Vetter
2019-01-30 11:06 ` Daniel Vetter
2019-01-30 18:06 ` Sean Paul
2019-01-30 18:27 ` Manasi Navare
2019-01-30 18:26 ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 05/28] drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC Manasi Navare
2018-10-24 22:28 ` [PATCH v6 06/28] drm/i915/dp: Validate modes using max Output BPP and slice count when DSC supported Manasi Navare
2018-10-24 22:28 ` [PATCH v6 07/28] drm/dp: Define payload size for DP SDP PPS packet Manasi Navare
2018-10-24 22:28 ` [PATCH v6 08/28] drm/dsc: Define Display Stream Compression PPS infoframe Manasi Navare
2018-11-01 16:42 ` Ville Syrjälä
2018-11-01 16:53 ` Ville Syrjälä
2018-11-01 21:48 ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 09/28] drm/dsc: Define VESA Display Stream Compression Capabilities Manasi Navare
2018-10-24 22:28 ` [PATCH v6 10/28] drm/dsc: Define Rate Control values that do not change over configurations Manasi Navare
2018-10-24 22:28 ` [PATCH v6 11/28] drm/dsc: Add helpers for DSC picture parameter set infoframes Manasi Navare
2018-11-01 16:46 ` Ville Syrjälä
2018-11-01 23:54 ` Manasi Navare
2018-11-02 0:23 ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 12/28] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state Manasi Navare
2018-10-30 23:53 ` Manasi Navare
2018-10-31 13:10 ` Ville Syrjälä
2018-10-31 16:05 ` Manasi Navare
2018-10-31 16:13 ` Ville Syrjälä
2018-10-24 22:28 ` [PATCH v6 13/28] drm/i915/dp: Compute DSC pipe config in atomic check Manasi Navare
2018-10-29 20:30 ` Ville Syrjälä
2018-10-29 20:34 ` Ville Syrjälä
2018-10-29 23:08 ` Manasi Navare
2018-10-30 11:46 ` Ville Syrjälä
2018-10-29 21:42 ` Manasi Navare
2018-10-29 22:12 ` Manasi Navare
2018-10-30 11:41 ` Ville Syrjälä
2018-10-24 22:28 ` [PATCH v6 14/28] drm/i915/dp: Do not enable PSR2 if DSC is enabled Manasi Navare
2018-10-24 22:28 ` [PATCH v6 15/28] drm/dsc: Define the DSC 1.1 and 1.2 Line Buffer depth constants Manasi Navare
2018-10-24 22:28 ` [PATCH v6 16/28] drm/i915/dsc: Define & Compute VESA DSC params Manasi Navare
2018-10-24 22:28 ` [PATCH v6 17/28] drm/i915/dsc: Compute Rate Control parameters for DSC Manasi Navare
2018-10-24 22:28 ` [PATCH v6 18/28] drm/i915/dp: Enable/Disable DSC in DP Sink Manasi Navare
2018-10-25 14:03 ` Ville Syrjälä
2018-10-25 20:11 ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 19/28] drm/i915/dsc: Add a power domain for VDSC on eDP/MIPI DSI Manasi Navare
2018-10-24 22:28 ` [PATCH v6 20/28] drm/i915/dp: Configure i915 Picture parameter Set registers during DSC enabling Manasi Navare
2018-10-24 22:28 ` [PATCH v6 21/28] drm/i915/dp: Use the existing write_infoframe() for DSC PPS SDPs Manasi Navare
2018-10-25 14:08 ` Ville Syrjälä
2018-10-29 19:24 ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 22/28] drm/i915/dp: Populate DSC PPS SDP and send PPS infoframes Manasi Navare
2018-10-25 14:09 ` Ville Syrjälä
2018-10-25 20:07 ` Manasi Navare
2018-10-30 23:45 ` Manasi Navare
2018-10-31 13:09 ` Ville Syrjälä
2018-10-24 22:28 ` [PATCH v6 23/28] drm/i915/icl: Add Display Stream Splitter control registers Manasi Navare
2018-10-24 22:28 ` [PATCH v6 24/28] drm/i915/dp: Configure Display stream splitter registers during DSC enable Manasi Navare
2018-10-25 14:15 ` Ville Syrjälä
2018-10-25 20:05 ` Manasi Navare
2018-10-24 22:28 ` Manasi Navare [this message]
2018-10-25 14:16 ` [PATCH v6 25/28] drm/i915/dp: Disable DSC in source by disabling DSS CTL bits Ville Syrjälä
2018-10-25 19:55 ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 26/28] drm/i915/dsc: Enable and disable appropriate power wells for VDSC Manasi Navare
2018-10-25 14:22 ` Ville Syrjälä
2018-10-25 19:41 ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 27/28] drm/i915/dsc: Add Per connector debugfs node for DSC support/enable Manasi Navare
2018-10-24 22:28 ` Lyude Paul
2018-10-25 20:12 ` Manasi Navare
2018-10-29 20:39 ` Ville Syrjälä
2018-10-29 21:35 ` Manasi Navare
2018-10-30 11:26 ` Ville Syrjälä
2018-10-24 22:28 ` [PATCH v6 28/28] drm/i915/dsc: Force DSC enable if requested by IGT/userspace Manasi Navare
2018-10-24 22:39 ` ✗ Fi.CI.CHECKPATCH: warning for Display Stream Compression enabling on eDP/DP (rev6) Patchwork
2018-10-24 22:50 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-10-24 23:02 ` ✗ Fi.CI.BAT: failure " Patchwork
2018-10-31 23:36 ` [PATCH v6 00/28] Display Stream Compression enabling on eDP/DP Manasi Navare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181024222840.25683-26-manasi.d.navare@intel.com \
--to=manasi.d.navare@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox