public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Manasi Navare <manasi.d.navare@intel.com>
To: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Subject: [PATCH v6 02/28] drm/dp: Add DP DSC DPCD receiver capability size define and missing SHIFT
Date: Wed, 24 Oct 2018 15:28:14 -0700	[thread overview]
Message-ID: <20181024222840.25683-3-manasi.d.navare@intel.com> (raw)
In-Reply-To: <20181024222840.25683-1-manasi.d.navare@intel.com>

This patch defines the DP DSC receiver capability size that gives
total number of DP DSC DPCD registers.
This also adds a missing #defines for DP DSC support missed in the
commit id (ab6a46ea6842ce "Add DPCD definitions for DP 1.4 DSC feature")

v3:
* MIN_SLICE_WIDTH = 2560 (Anusha)
* Define DP_DSC_SLICE_WIDTH_MULTIPLIER = 320
v2:
* Add SHIFT define and DECOMPRESSION_EN define missed in prev patch

Cc: dri-devel@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Gaurav K Singh <gaurav.k.singh@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
---
 include/drm/drm_dp_helper.h | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 9ad98e8d9ede..dd33d59739f8 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -231,6 +231,8 @@
 #define DP_DSC_MAX_BITS_PER_PIXEL_LOW       0x067   /* eDP 1.4 */
 
 #define DP_DSC_MAX_BITS_PER_PIXEL_HI        0x068   /* eDP 1.4 */
+# define DP_DSC_MAX_BITS_PER_PIXEL_HI_MASK  (0x3 << 0)
+# define DP_DSC_MAX_BITS_PER_PIXEL_HI_SHIFT 8
 
 #define DP_DSC_DEC_COLOR_FORMAT_CAP         0x069
 # define DP_DSC_RGB                         (1 << 0)
@@ -279,6 +281,8 @@
 # define DP_DSC_THROUGHPUT_MODE_1_1000      (14 << 4)
 
 #define DP_DSC_MAX_SLICE_WIDTH              0x06C
+#define DP_DSC_MIN_SLICE_WIDTH_VALUE        2560
+#define DP_DSC_SLICE_WIDTH_MULTIPLIER       320
 
 #define DP_DSC_SLICE_CAP_2                  0x06D
 # define DP_DSC_16_PER_DP_DSC_SINK          (1 << 0)
@@ -477,6 +481,7 @@
 # define DP_AUX_FRAME_SYNC_VALID	    (1 << 0)
 
 #define DP_DSC_ENABLE                       0x160   /* DP 1.4 */
+# define DP_DECOMPRESSION_EN                (1 << 0)
 
 #define DP_PSR_EN_CFG			    0x170   /* XXX 1.2? */
 # define DP_PSR_ENABLE			    (1 << 0)
@@ -965,6 +970,7 @@ u8 drm_dp_get_adjust_request_pre_emphasis(const u8 link_status[DP_LINK_STATUS_SI
 
 #define DP_BRANCH_OUI_HEADER_SIZE	0xc
 #define DP_RECEIVER_CAP_SIZE		0xf
+#define DP_DSC_RECEIVER_CAP_SIZE        0xf
 #define EDP_PSR_RECEIVER_CAP_SIZE	2
 #define EDP_DISPLAY_CTL_CAP_SIZE	3
 
-- 
2.18.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2018-10-24 22:28 UTC|newest]

Thread overview: 74+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-24 22:28 [PATCH v6 00/28] Display Stream Compression enabling on eDP/DP Manasi Navare
2018-10-24 22:28 ` [PATCH v6 01/28] drm/i915/dsc: Add slice_row_per_frame in DSC PPS programming Manasi Navare
2018-10-24 22:28 ` Manasi Navare [this message]
2018-10-24 22:28 ` [PATCH v6 03/28] drm/i915/dp: Cache the DP/eDP DSC DPCD register set on Hotplug/eDP Init Manasi Navare
2018-10-24 22:28 ` [PATCH v6 04/28] drm/dp: DRM DP helper/macros to get DP sink DSC parameters Manasi Navare
2018-12-19 18:54   ` [Intel-gfx] " Daniel Vetter
2019-01-30 11:06     ` Daniel Vetter
2019-01-30 18:06       ` Sean Paul
2019-01-30 18:27         ` Manasi Navare
2019-01-30 18:26       ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 05/28] drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC Manasi Navare
2018-10-24 22:28 ` [PATCH v6 06/28] drm/i915/dp: Validate modes using max Output BPP and slice count when DSC supported Manasi Navare
2018-10-24 22:28 ` [PATCH v6 07/28] drm/dp: Define payload size for DP SDP PPS packet Manasi Navare
2018-10-24 22:28 ` [PATCH v6 08/28] drm/dsc: Define Display Stream Compression PPS infoframe Manasi Navare
2018-11-01 16:42   ` Ville Syrjälä
2018-11-01 16:53     ` Ville Syrjälä
2018-11-01 21:48     ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 09/28] drm/dsc: Define VESA Display Stream Compression Capabilities Manasi Navare
2018-10-24 22:28 ` [PATCH v6 10/28] drm/dsc: Define Rate Control values that do not change over configurations Manasi Navare
2018-10-24 22:28 ` [PATCH v6 11/28] drm/dsc: Add helpers for DSC picture parameter set infoframes Manasi Navare
2018-11-01 16:46   ` Ville Syrjälä
2018-11-01 23:54     ` Manasi Navare
2018-11-02  0:23       ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 12/28] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state Manasi Navare
2018-10-30 23:53   ` Manasi Navare
2018-10-31 13:10     ` Ville Syrjälä
2018-10-31 16:05       ` Manasi Navare
2018-10-31 16:13         ` Ville Syrjälä
2018-10-24 22:28 ` [PATCH v6 13/28] drm/i915/dp: Compute DSC pipe config in atomic check Manasi Navare
2018-10-29 20:30   ` Ville Syrjälä
2018-10-29 20:34     ` Ville Syrjälä
2018-10-29 23:08       ` Manasi Navare
2018-10-30 11:46         ` Ville Syrjälä
2018-10-29 21:42     ` Manasi Navare
2018-10-29 22:12     ` Manasi Navare
2018-10-30 11:41       ` Ville Syrjälä
2018-10-24 22:28 ` [PATCH v6 14/28] drm/i915/dp: Do not enable PSR2 if DSC is enabled Manasi Navare
2018-10-24 22:28 ` [PATCH v6 15/28] drm/dsc: Define the DSC 1.1 and 1.2 Line Buffer depth constants Manasi Navare
2018-10-24 22:28 ` [PATCH v6 16/28] drm/i915/dsc: Define & Compute VESA DSC params Manasi Navare
2018-10-24 22:28 ` [PATCH v6 17/28] drm/i915/dsc: Compute Rate Control parameters for DSC Manasi Navare
2018-10-24 22:28 ` [PATCH v6 18/28] drm/i915/dp: Enable/Disable DSC in DP Sink Manasi Navare
2018-10-25 14:03   ` Ville Syrjälä
2018-10-25 20:11     ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 19/28] drm/i915/dsc: Add a power domain for VDSC on eDP/MIPI DSI Manasi Navare
2018-10-24 22:28 ` [PATCH v6 20/28] drm/i915/dp: Configure i915 Picture parameter Set registers during DSC enabling Manasi Navare
2018-10-24 22:28 ` [PATCH v6 21/28] drm/i915/dp: Use the existing write_infoframe() for DSC PPS SDPs Manasi Navare
2018-10-25 14:08   ` Ville Syrjälä
2018-10-29 19:24     ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 22/28] drm/i915/dp: Populate DSC PPS SDP and send PPS infoframes Manasi Navare
2018-10-25 14:09   ` Ville Syrjälä
2018-10-25 20:07     ` Manasi Navare
2018-10-30 23:45     ` Manasi Navare
2018-10-31 13:09       ` Ville Syrjälä
2018-10-24 22:28 ` [PATCH v6 23/28] drm/i915/icl: Add Display Stream Splitter control registers Manasi Navare
2018-10-24 22:28 ` [PATCH v6 24/28] drm/i915/dp: Configure Display stream splitter registers during DSC enable Manasi Navare
2018-10-25 14:15   ` Ville Syrjälä
2018-10-25 20:05     ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 25/28] drm/i915/dp: Disable DSC in source by disabling DSS CTL bits Manasi Navare
2018-10-25 14:16   ` Ville Syrjälä
2018-10-25 19:55     ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 26/28] drm/i915/dsc: Enable and disable appropriate power wells for VDSC Manasi Navare
2018-10-25 14:22   ` Ville Syrjälä
2018-10-25 19:41     ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 27/28] drm/i915/dsc: Add Per connector debugfs node for DSC support/enable Manasi Navare
2018-10-24 22:28   ` Lyude Paul
2018-10-25 20:12     ` Manasi Navare
2018-10-29 20:39   ` Ville Syrjälä
2018-10-29 21:35     ` Manasi Navare
2018-10-30 11:26       ` Ville Syrjälä
2018-10-24 22:28 ` [PATCH v6 28/28] drm/i915/dsc: Force DSC enable if requested by IGT/userspace Manasi Navare
2018-10-24 22:39 ` ✗ Fi.CI.CHECKPATCH: warning for Display Stream Compression enabling on eDP/DP (rev6) Patchwork
2018-10-24 22:50 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-10-24 23:02 ` ✗ Fi.CI.BAT: failure " Patchwork
2018-10-31 23:36 ` [PATCH v6 00/28] Display Stream Compression enabling on eDP/DP Manasi Navare

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181024222840.25683-3-manasi.d.navare@intel.com \
    --to=manasi.d.navare@intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox