From: Suraj Kandpal <suraj.kandpal@intel.com>
To: intel-xe@lists.freedesktop.org, intel-gfx@lists.freedesktop.org
Cc: ankit.k.nautiyal@intel.com, arun.r.murthy@intel.com,
uma.shankar@intel.com, gustavo.sousa@intel.com,
lucas.demarchi@intel.com, Suraj Kandpal <suraj.kandpal@intel.com>
Subject: [PATCH 17/25] drm/i915/ddi: Define LT Phy Swing tables
Date: Wed, 15 Oct 2025 09:38:09 +0530 [thread overview]
Message-ID: <20251015040817.3431297-18-suraj.kandpal@intel.com> (raw)
In-Reply-To: <20251015040817.3431297-1-suraj.kandpal@intel.com>
Define and initialize LT Phy Swing tables for DP 1.4, 2.1 and eDp.
HDMI TMDS is not needed since LT Phy H/w handles that.
Bspec: 74493
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
---
.../drm/i915/display/intel_ddi_buf_trans.c | 81 ++++++++++++++++++-
.../drm/i915/display/intel_ddi_buf_trans.h | 9 +++
2 files changed, 89 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c b/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c
index a238be5bc455..f39e690e9ed2 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c
@@ -10,6 +10,7 @@
#include "intel_de.h"
#include "intel_display_types.h"
#include "intel_dp.h"
+#include "intel_lt_phy.h"
/* HDMI/DVI modes ignore everything but the last 2 items. So we share
* them for both DP and FDI transports, allowing those ports to
@@ -1115,6 +1116,69 @@ static const struct intel_ddi_buf_trans mtl_c20_trans_uhbr = {
.num_entries = ARRAY_SIZE(_mtl_c20_trans_uhbr),
};
+/* DP1.4 */
+static const union intel_ddi_buf_trans_entry _xe3plpd_lt_trans_dp14[] = {
+ { .lt = { 1, 0, 0, 21, 0 } },
+ { .lt = { 1, 1, 0, 24, 3 } },
+ { .lt = { 1, 2, 0, 28, 7 } },
+ { .lt = { 0, 3, 0, 35, 13 } },
+ { .lt = { 1, 1, 0, 27, 0 } },
+ { .lt = { 1, 2, 0, 31, 4 } },
+ { .lt = { 0, 3, 0, 39, 9 } },
+ { .lt = { 1, 2, 0, 35, 0 } },
+ { .lt = { 0, 3, 0, 41, 7 } },
+ { .lt = { 0, 3, 0, 48, 0 } },
+};
+
+/* DP2.1 */
+static const union intel_ddi_buf_trans_entry _xe3plpd_lt_trans_uhbr[] = {
+ { .lt = { 0, 0, 0, 48, 0 } },
+ { .lt = { 0, 0, 0, 43, 5 } },
+ { .lt = { 0, 0, 0, 40, 8 } },
+ { .lt = { 0, 0, 0, 37, 11 } },
+ { .lt = { 0, 0, 0, 33, 15 } },
+ { .lt = { 0, 0, 2, 46, 0 } },
+ { .lt = { 0, 0, 2, 42, 4 } },
+ { .lt = { 0, 0, 2, 38, 8 } },
+ { .lt = { 0, 0, 2, 35, 11 } },
+ { .lt = { 0, 0, 2, 33, 13 } },
+ { .lt = { 0, 0, 4, 44, 0 } },
+ { .lt = { 0, 0, 4, 40, 4 } },
+ { .lt = { 0, 0, 4, 37, 7 } },
+ { .lt = { 0, 0, 4, 33, 11 } },
+ { .lt = { 0, 0, 8, 40, 0 } },
+ { .lt = { 1, 0, 2, 26, 2 } },
+};
+
+/* eDp */
+static const union intel_ddi_buf_trans_entry _xe3plpd_lt_trans_edp[] = {
+ { .lt = { 1, 0, 0, 12, 0 } },
+ { .lt = { 1, 1, 0, 13, 1 } },
+ { .lt = { 1, 2, 0, 15, 3 } },
+ { .lt = { 1, 3, 0, 19, 7 } },
+ { .lt = { 1, 1, 0, 14, 0 } },
+ { .lt = { 1, 2, 0, 16, 2 } },
+ { .lt = { 1, 3, 0, 21, 5 } },
+ { .lt = { 1, 2, 0, 18, 0 } },
+ { .lt = { 1, 3, 0, 22, 4 } },
+ { .lt = { 1, 3, 0, 26, 0 } },
+};
+
+static const struct intel_ddi_buf_trans xe3plpd_lt_trans_dp14 = {
+ .entries = _xe3plpd_lt_trans_dp14,
+ .num_entries = ARRAY_SIZE(_xe3plpd_lt_trans_dp14),
+};
+
+static const struct intel_ddi_buf_trans xe3plpd_lt_trans_uhbr = {
+ .entries = _xe3plpd_lt_trans_uhbr,
+ .num_entries = ARRAY_SIZE(_xe3plpd_lt_trans_uhbr),
+};
+
+static const struct intel_ddi_buf_trans xe3plpd_lt_trans_edp = {
+ .entries = _xe3plpd_lt_trans_edp,
+ .num_entries = ARRAY_SIZE(_xe3plpd_lt_trans_edp),
+};
+
bool is_hobl_buf_trans(const struct intel_ddi_buf_trans *table)
{
return table == &tgl_combo_phy_trans_edp_hbr2_hobl;
@@ -1707,11 +1771,26 @@ mtl_get_c20_buf_trans(struct intel_encoder *encoder,
return intel_get_buf_trans(&mtl_c20_trans_dp14, n_entries);
}
+static const struct intel_ddi_buf_trans *
+xe3plpd_get_lt_buf_trans(struct intel_encoder *encoder,
+ const struct intel_crtc_state *crtc_state,
+ int *n_entries)
+{
+ if (intel_crtc_has_dp_encoder(crtc_state) && intel_dp_is_uhbr(crtc_state))
+ return intel_get_buf_trans(&xe3plpd_lt_trans_uhbr, n_entries);
+ else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_EDP))
+ return intel_get_buf_trans(&xe3plpd_lt_trans_edp, n_entries);
+ else
+ return intel_get_buf_trans(&xe3plpd_lt_trans_dp14, n_entries);
+}
+
void intel_ddi_buf_trans_init(struct intel_encoder *encoder)
{
struct intel_display *display = to_intel_display(encoder);
- if (DISPLAY_VER(display) >= 14) {
+ if (HAS_LT_PHY(display)) {
+ encoder->get_buf_trans = xe3plpd_get_lt_buf_trans;
+ } else if (DISPLAY_VER(display) >= 14) {
if (intel_encoder_is_c10phy(encoder))
encoder->get_buf_trans = mtl_get_c10_buf_trans;
else
diff --git a/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.h b/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.h
index 29a190390192..cec332090a20 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.h
+++ b/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.h
@@ -50,6 +50,14 @@ struct dg2_snps_phy_buf_trans {
u8 post_cursor;
};
+struct xe3plpd_lt_phy_buf_trans {
+ u8 txswing;
+ u8 txswing_level;
+ u8 pre_cursor;
+ u8 main_cursor;
+ u8 post_cursor;
+};
+
union intel_ddi_buf_trans_entry {
struct hsw_ddi_buf_trans hsw;
struct bxt_ddi_buf_trans bxt;
@@ -57,6 +65,7 @@ union intel_ddi_buf_trans_entry {
struct icl_mg_phy_ddi_buf_trans mg;
struct tgl_dkl_phy_ddi_buf_trans dkl;
struct dg2_snps_phy_buf_trans snps;
+ struct xe3plpd_lt_phy_buf_trans lt;
};
struct intel_ddi_buf_trans {
--
2.34.1
next prev parent reply other threads:[~2025-10-15 4:09 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-15 4:07 [PATCH 00/25] Enable LT PHY Suraj Kandpal
2025-10-15 4:07 ` [PATCH 01/25] drm/i915/ltphy: Add LT Phy related VDR and Pipe Registers Suraj Kandpal
2025-10-20 11:10 ` Jani Nikula
2025-10-22 4:05 ` Kandpal, Suraj
2025-10-22 7:57 ` Murthy, Arun R
2025-10-15 4:07 ` [PATCH 02/25] drm/i915/cx0: Change register bit naming for powerdown values Suraj Kandpal
2025-10-22 8:01 ` Murthy, Arun R
2025-10-15 4:07 ` [PATCH 03/25] drm/i915/ltphy: Phy lane reset for LT Phy Suraj Kandpal
2025-10-22 8:41 ` Murthy, Arun R
2025-10-22 9:01 ` Kandpal, Suraj
2025-10-15 4:07 ` [PATCH 04/25] drm/i915/ltphy: Program sequence for PORT_CLOCK_CTL " Suraj Kandpal
2025-10-22 8:49 ` Murthy, Arun R
2025-10-22 8:58 ` Kandpal, Suraj
2025-10-22 9:06 ` Murthy, Arun R
2025-10-15 4:07 ` [PATCH 05/25] drm/i915/ltphy: Add a wrapper for LT Phy powerdown change sequence Suraj Kandpal
2025-10-22 9:13 ` Murthy, Arun R
2025-10-15 4:07 ` [PATCH 06/25] drm/i915/ltphy: Read PHY_VDR_0_CONFIG register Suraj Kandpal
2025-10-23 7:29 ` Murthy, Arun R
2025-10-15 4:07 ` [PATCH 07/25] drm/i915/ltphy: Add LT Phy Programming recipe tables Suraj Kandpal
2025-10-23 7:36 ` Murthy, Arun R
2025-10-15 4:08 ` [PATCH 08/25] drm/i915/ltphy: Program the VDR PLL registers for LT PHY Suraj Kandpal
2025-10-23 7:40 ` Murthy, Arun R
2025-10-15 4:08 ` [PATCH 09/25] drm/i915/ltphy: Update the ltpll config table value for eDP Suraj Kandpal
2025-10-23 7:42 ` Murthy, Arun R
2025-10-15 4:08 ` [PATCH 10/25] drm/i915/ltphy: Enable SSC during port clock programming Suraj Kandpal
2025-10-23 7:49 ` Murthy, Arun R
2025-10-15 4:08 ` [PATCH 11/25] drm/i915/ltphy: Add function to calculate LT PHY port clock Suraj Kandpal
2025-10-15 4:08 ` [PATCH 12/25] drm/i915/ltphy: Program the P2P Transaction flow for LT Phy Suraj Kandpal
2025-10-23 8:18 ` Murthy, Arun R
2025-10-23 9:24 ` Kandpal, Suraj
2025-10-23 9:32 ` Murthy, Arun R
2025-10-15 4:08 ` [PATCH 13/25] drm/i915/ltphy: Program the rest of the PORT_CLOCK_CTL steps Suraj Kandpal
2025-10-23 8:27 ` Murthy, Arun R
2025-10-15 4:08 ` [PATCH 14/25] drm/i915/ltphy: Program the rest of the LT Phy Enable sequence Suraj Kandpal
2025-10-23 8:32 ` Murthy, Arun R
2025-10-15 4:08 ` [PATCH 15/25] drm/i915/ltphy: Program LT Phy Non-TBT PLL disable sequence Suraj Kandpal
2025-10-23 8:40 ` Murthy, Arun R
2025-10-15 4:08 ` [PATCH 16/25] drm/i915/ltphy: Hook up LT Phy Enable & Disable sequences Suraj Kandpal
2025-10-23 8:43 ` Murthy, Arun R
2025-10-15 4:08 ` Suraj Kandpal [this message]
2025-10-23 9:33 ` [PATCH 17/25] drm/i915/ddi: Define LT Phy Swing tables Murthy, Arun R
2025-10-15 4:08 ` [PATCH 18/25] drm/i915/ltphy: Program LT Phy Voltage Swing Suraj Kandpal
2025-10-24 6:39 ` Murthy, Arun R
2025-10-15 4:08 ` [PATCH 19/25] drm/i915/ltphy: Enable/Disable Tx after Non TBT Enable sequence Suraj Kandpal
2025-10-24 7:00 ` Murthy, Arun R
2025-10-15 4:08 ` [PATCH 20/25] drm/i915/ltphy: Define the LT Phy state compare function Suraj Kandpal
2025-10-24 7:03 ` Murthy, Arun R
2025-10-15 4:08 ` [PATCH 21/25] drm/i915/ltphy: Define function to readout LT Phy PLL state Suraj Kandpal
2025-10-24 7:14 ` Murthy, Arun R
2025-10-15 4:08 ` [PATCH 22/25] drm/i915/ltphy: Define LT PHY PLL state verify function Suraj Kandpal
2025-10-24 7:26 ` Murthy, Arun R
2025-10-15 4:08 ` [PATCH 23/25] drm/i915/display: Aux Enable and Display powerwell timeouts Suraj Kandpal
2025-10-24 7:32 ` Murthy, Arun R
2025-10-15 4:08 ` [PATCH 24/25] drm/i915/ltphy: Modify the step that need to by skipped Suraj Kandpal
2025-10-24 7:33 ` Murthy, Arun R
2025-10-15 4:08 ` [PATCH 25/25] drm/i915/ltphy: Implement HDMI Algo for Pll state Suraj Kandpal
2025-10-15 4:22 ` ✗ CI.checkpatch: warning for Enable LT PHY Patchwork
2025-10-15 4:23 ` ✓ CI.KUnit: success " Patchwork
2025-10-15 4:38 ` ✗ CI.checksparse: warning " Patchwork
2025-10-15 5:00 ` ✓ Xe.CI.BAT: success " Patchwork
2025-10-15 14:28 ` ✗ Xe.CI.Full: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251015040817.3431297-18-suraj.kandpal@intel.com \
--to=suraj.kandpal@intel.com \
--cc=ankit.k.nautiyal@intel.com \
--cc=arun.r.murthy@intel.com \
--cc=gustavo.sousa@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=lucas.demarchi@intel.com \
--cc=uma.shankar@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox