[PATCH 24/25] drm/i915/ltphy: Modify the step that need to by skipped

[Suraj Kandpal <suraj.kandpal@intel.com>]

Bspec has changed the non tbt pll enable sequence now we skip
steps 5-17 if no config change has occurred.

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
---
 drivers/gpu/drm/i915/display/intel_lt_phy.c | 63 +++++++++++----------
 1 file changed, 33 insertions(+), 30 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_lt_phy.c b/drivers/gpu/drm/i915/display/intel_lt_phy.c
index 72c3ba787e2a..0262c3a97020 100644
--- a/drivers/gpu/drm/i915/display/intel_lt_phy.c
+++ b/drivers/gpu/drm/i915/display/intel_lt_phy.c
@@ -1664,40 +1664,43 @@ void intel_lt_phy_pll_enable(struct intel_encoder *encoder,
 					 XE3PLPD_MACCLK_TURNON_LATENCY_US, 2, NULL))
 			drm_warn(display->drm, "PHY %c PLL MacCLK Ack assertion Timeout after %dus.\n",
 				 phy_name(phy), XE3PLPD_MACCLK_TURNON_LATENCY_US);
+
+		/*
+		 * 13. Ungate the forward clock by setting
+		 * PORT_CLOCK_CTL[Forward Clock Ungate] = 1.
+		 */
+		intel_de_rmw(display, XELPDP_PORT_CLOCK_CTL(display, port),
+			     XELPDP_FORWARD_CLOCK_UNGATE,
+			     XELPDP_FORWARD_CLOCK_UNGATE);
+
+		/* 14. SW clears PORT_BUF_CTL2 [PHY Pulse Status]. */
+		intel_de_rmw(display, XELPDP_PORT_BUF_CTL2(display, port),
+			     lane_phy_pulse_status,
+			     lane_phy_pulse_status);
+		/*
+		 * 15. Clear the PHY VDR register 0xCC4[Rate Control VDR Update] over
+		 * PHY message bus for Owned PHY Lanes.
+		 */
+		rate_update = intel_lt_phy_read(encoder, INTEL_LT_PHY_LANE0, LT_PHY_RATE_UPDATE);
+		rate_update &= ~LT_PHY_RATE_CONTROL_VDR_UPDATE;
+		intel_lt_phy_write(encoder, owned_lane_mask, LT_PHY_RATE_UPDATE,
+				   rate_update, MB_WRITE_COMMITTED);
+
+		/* 16. Poll for PORT_BUF_CTL2 register PHY Pulse Status = 1 for Owned PHY Lanes. */
+		if (intel_de_wait_custom(display, XELPDP_PORT_BUF_CTL2(display, port),
+					 lane_phy_pulse_status, lane_phy_pulse_status,
+					 XE3PLPD_RATE_CALIB_DONE_LATENCY_US, 2, NULL))
+			drm_warn(display->drm, "PHY %c PLL rate not changed after %dus.\n",
+				 phy_name(phy), XE3PLPD_RATE_CALIB_DONE_LATENCY_US);
+
+		/* 17. SW clears PORT_BUF_CTL2 [PHY Pulse Status]. */
+		intel_de_rmw(display, XELPDP_PORT_BUF_CTL2(display, port),
+			     lane_phy_pulse_status,
+			     lane_phy_pulse_status);
 	} else {
 		intel_de_write(display, DDI_CLK_VALFREQ(encoder->port), crtc_state->port_clock);
 	}
 
-	/* 13. Ungate the forward clock by setting PORT_CLOCK_CTL[Forward Clock Ungate] = 1. */
-	intel_de_rmw(display, XELPDP_PORT_CLOCK_CTL(display, port),
-		     XELPDP_FORWARD_CLOCK_UNGATE,
-		     XELPDP_FORWARD_CLOCK_UNGATE);
-
-	/* 14. SW clears PORT_BUF_CTL2 [PHY Pulse Status]. */
-	intel_de_rmw(display, XELPDP_PORT_BUF_CTL2(display, port),
-		     lane_phy_pulse_status,
-		     lane_phy_pulse_status);
-	/*
-	 * 15. Clear the PHY VDR register 0xCC4[Rate Control VDR Update] over PHY message bus for
-	 * Owned PHY Lanes.
-	 */
-	rate_update = intel_lt_phy_read(encoder, INTEL_LT_PHY_LANE0, LT_PHY_RATE_UPDATE);
-	rate_update &= ~LT_PHY_RATE_CONTROL_VDR_UPDATE;
-	intel_lt_phy_write(encoder, owned_lane_mask, LT_PHY_RATE_UPDATE,
-			   rate_update, MB_WRITE_COMMITTED);
-
-	/* 16. Poll for PORT_BUF_CTL2 register PHY Pulse Status = 1 for Owned PHY Lanes. */
-	if (intel_de_wait_custom(display, XELPDP_PORT_BUF_CTL2(display, port),
-				 lane_phy_pulse_status, lane_phy_pulse_status,
-				 XE3PLPD_RATE_CALIB_DONE_LATENCY_US, 2, NULL))
-		drm_warn(display->drm, "PHY %c PLL rate not changed after %dus.\n",
-			 phy_name(phy), XE3PLPD_RATE_CALIB_DONE_LATENCY_US);
-
-	/* 17. SW clears PORT_BUF_CTL2 [PHY Pulse Status]. */
-	intel_de_rmw(display, XELPDP_PORT_BUF_CTL2(display, port),
-		     lane_phy_pulse_status,
-		     lane_phy_pulse_status);
-
 	/*
 	 * 18. Follow the Display Voltage Frequency Switching - Sequence After Frequency Change.
 	 * We handle this step in bxt_set_cdclk()
-- 
2.34.1