Intel-XE Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Suraj Kandpal <suraj.kandpal@intel.com>
To: intel-xe@lists.freedesktop.org, intel-gfx@lists.freedesktop.org
Cc: ankit.k.nautiyal@intel.com, arun.r.murthy@intel.com,
	uma.shankar@intel.com, gustavo.sousa@intel.com,
	lucas.demarchi@intel.com, Suraj Kandpal <suraj.kandpal@intel.com>
Subject: [PATCH 21/25] drm/i915/ltphy: Define function to readout LT Phy PLL state
Date: Wed, 15 Oct 2025 09:38:13 +0530	[thread overview]
Message-ID: <20251015040817.3431297-22-suraj.kandpal@intel.com> (raw)
In-Reply-To: <20251015040817.3431297-1-suraj.kandpal@intel.com>

Define a function to readout hw state for LT Phy PLL which
can be used in get_config function call.

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
---
 drivers/gpu/drm/i915/display/intel_ddi.c    | 14 +++++++++
 drivers/gpu/drm/i915/display/intel_lt_phy.c | 33 +++++++++++++++++++++
 drivers/gpu/drm/i915/display/intel_lt_phy.h |  3 ++
 3 files changed, 50 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index b6345508cb66..e226ba8a4348 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -4246,6 +4246,19 @@ void intel_ddi_get_clock(struct intel_encoder *encoder,
 						     &crtc_state->dpll_hw_state);
 }
 
+static void xe3plpd_ddi_get_config(struct intel_encoder *encoder,
+				   struct intel_crtc_state *crtc_state)
+{
+	intel_lt_phy_pll_readout_hw_state(encoder, crtc_state, &crtc_state->dpll_hw_state.ltpll);
+
+	if (crtc_state->dpll_hw_state.ltpll.tbt_mode)
+		crtc_state->port_clock = intel_mtl_tbt_calc_port_clock(encoder);
+	else
+		crtc_state->port_clock =
+			intel_lt_phy_calc_port_clock(encoder, crtc_state);
+	intel_ddi_get_config(encoder, crtc_state);
+}
+
 static void mtl_ddi_get_config(struct intel_encoder *encoder,
 			       struct intel_crtc_state *crtc_state)
 {
@@ -5234,6 +5247,7 @@ void intel_ddi_init(struct intel_display *display,
 		encoder->enable_clock = intel_xe3plpd_pll_enable;
 		encoder->disable_clock = intel_xe3plpd_pll_disable;
 		encoder->port_pll_type = intel_mtl_port_pll_type;
+		encoder->get_config = xe3plpd_ddi_get_config;
 	} else if (DISPLAY_VER(display) >= 14) {
 		encoder->enable_clock = intel_mtl_pll_enable;
 		encoder->disable_clock = intel_mtl_pll_disable;
diff --git a/drivers/gpu/drm/i915/display/intel_lt_phy.c b/drivers/gpu/drm/i915/display/intel_lt_phy.c
index 0be4aad0efcc..11178cd00a5b 100644
--- a/drivers/gpu/drm/i915/display/intel_lt_phy.c
+++ b/drivers/gpu/drm/i915/display/intel_lt_phy.c
@@ -1873,6 +1873,39 @@ intel_lt_phy_pll_compare_hw_state(const struct intel_lt_phy_pll_state *a,
 	return true;
 }
 
+void intel_lt_phy_pll_readout_hw_state(struct intel_encoder *encoder,
+				       const struct intel_crtc_state *crtc_state,
+				       struct intel_lt_phy_pll_state *pll_state)
+{
+	u8 owned_lane_mask;
+	u8 lane;
+	intel_wakeref_t wakeref;
+	int i, j, k;
+
+	pll_state->tbt_mode = intel_tc_port_in_tbt_alt_mode(enc_to_dig_port(encoder));
+	if (pll_state->tbt_mode)
+		return;
+
+	owned_lane_mask = intel_lt_phy_get_owned_lane_mask(encoder);
+	lane = owned_lane_mask & INTEL_LT_PHY_LANE0 ? : INTEL_LT_PHY_LANE1;
+	wakeref = intel_lt_phy_transaction_begin(encoder);
+
+	pll_state->config[0] = intel_lt_phy_read(encoder, lane, LT_PHY_VDR_0_CONFIG);
+	pll_state->config[1] = intel_lt_phy_read(encoder, INTEL_LT_PHY_LANE0, LT_PHY_VDR_1_CONFIG);
+	pll_state->config[2] = intel_lt_phy_read(encoder, lane, LT_PHY_VDR_2_CONFIG);
+
+	for (i = 0; i <= 12; i++) {
+		for (j = 3, k = 0; j >= 0; j--, k++)
+			pll_state->data[i][k] =
+				intel_lt_phy_read(encoder, INTEL_LT_PHY_LANE0,
+						  LT_PHY_VDR_X_DATAY(i, j));
+	}
+
+	pll_state->clock =
+		intel_lt_phy_calc_port_clock(encoder, crtc_state);
+	intel_lt_phy_transaction_end(encoder, wakeref);
+}
+
 void intel_xe3plpd_pll_enable(struct intel_encoder *encoder,
 			      const struct intel_crtc_state *crtc_state)
 {
diff --git a/drivers/gpu/drm/i915/display/intel_lt_phy.h b/drivers/gpu/drm/i915/display/intel_lt_phy.h
index e93e5becc316..dd8cbb151b23 100644
--- a/drivers/gpu/drm/i915/display/intel_lt_phy.h
+++ b/drivers/gpu/drm/i915/display/intel_lt_phy.h
@@ -28,6 +28,9 @@ void intel_lt_phy_dump_hw_state(struct intel_display *display,
 bool
 intel_lt_phy_pll_compare_hw_state(const struct intel_lt_phy_pll_state *a,
 				  const struct intel_lt_phy_pll_state *b);
+void intel_lt_phy_pll_readout_hw_state(struct intel_encoder *encoder,
+				       const struct intel_crtc_state *crtc_state,
+				       struct intel_lt_phy_pll_state *pll_state);
 void intel_xe3plpd_pll_enable(struct intel_encoder *encoder,
 			      const struct intel_crtc_state *crtc_state);
 void intel_xe3plpd_pll_disable(struct intel_encoder *encoder);
-- 
2.34.1


  parent reply	other threads:[~2025-10-15  4:09 UTC|newest]

Thread overview: 61+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-10-15  4:07 [PATCH 00/25] Enable LT PHY Suraj Kandpal
2025-10-15  4:07 ` [PATCH 01/25] drm/i915/ltphy: Add LT Phy related VDR and Pipe Registers Suraj Kandpal
2025-10-20 11:10   ` Jani Nikula
2025-10-22  4:05     ` Kandpal, Suraj
2025-10-22  7:57   ` Murthy, Arun R
2025-10-15  4:07 ` [PATCH 02/25] drm/i915/cx0: Change register bit naming for powerdown values Suraj Kandpal
2025-10-22  8:01   ` Murthy, Arun R
2025-10-15  4:07 ` [PATCH 03/25] drm/i915/ltphy: Phy lane reset for LT Phy Suraj Kandpal
2025-10-22  8:41   ` Murthy, Arun R
2025-10-22  9:01     ` Kandpal, Suraj
2025-10-15  4:07 ` [PATCH 04/25] drm/i915/ltphy: Program sequence for PORT_CLOCK_CTL " Suraj Kandpal
2025-10-22  8:49   ` Murthy, Arun R
2025-10-22  8:58     ` Kandpal, Suraj
2025-10-22  9:06       ` Murthy, Arun R
2025-10-15  4:07 ` [PATCH 05/25] drm/i915/ltphy: Add a wrapper for LT Phy powerdown change sequence Suraj Kandpal
2025-10-22  9:13   ` Murthy, Arun R
2025-10-15  4:07 ` [PATCH 06/25] drm/i915/ltphy: Read PHY_VDR_0_CONFIG register Suraj Kandpal
2025-10-23  7:29   ` Murthy, Arun R
2025-10-15  4:07 ` [PATCH 07/25] drm/i915/ltphy: Add LT Phy Programming recipe tables Suraj Kandpal
2025-10-23  7:36   ` Murthy, Arun R
2025-10-15  4:08 ` [PATCH 08/25] drm/i915/ltphy: Program the VDR PLL registers for LT PHY Suraj Kandpal
2025-10-23  7:40   ` Murthy, Arun R
2025-10-15  4:08 ` [PATCH 09/25] drm/i915/ltphy: Update the ltpll config table value for eDP Suraj Kandpal
2025-10-23  7:42   ` Murthy, Arun R
2025-10-15  4:08 ` [PATCH 10/25] drm/i915/ltphy: Enable SSC during port clock programming Suraj Kandpal
2025-10-23  7:49   ` Murthy, Arun R
2025-10-15  4:08 ` [PATCH 11/25] drm/i915/ltphy: Add function to calculate LT PHY port clock Suraj Kandpal
2025-10-15  4:08 ` [PATCH 12/25] drm/i915/ltphy: Program the P2P Transaction flow for LT Phy Suraj Kandpal
2025-10-23  8:18   ` Murthy, Arun R
2025-10-23  9:24     ` Kandpal, Suraj
2025-10-23  9:32       ` Murthy, Arun R
2025-10-15  4:08 ` [PATCH 13/25] drm/i915/ltphy: Program the rest of the PORT_CLOCK_CTL steps Suraj Kandpal
2025-10-23  8:27   ` Murthy, Arun R
2025-10-15  4:08 ` [PATCH 14/25] drm/i915/ltphy: Program the rest of the LT Phy Enable sequence Suraj Kandpal
2025-10-23  8:32   ` Murthy, Arun R
2025-10-15  4:08 ` [PATCH 15/25] drm/i915/ltphy: Program LT Phy Non-TBT PLL disable sequence Suraj Kandpal
2025-10-23  8:40   ` Murthy, Arun R
2025-10-15  4:08 ` [PATCH 16/25] drm/i915/ltphy: Hook up LT Phy Enable & Disable sequences Suraj Kandpal
2025-10-23  8:43   ` Murthy, Arun R
2025-10-15  4:08 ` [PATCH 17/25] drm/i915/ddi: Define LT Phy Swing tables Suraj Kandpal
2025-10-23  9:33   ` Murthy, Arun R
2025-10-15  4:08 ` [PATCH 18/25] drm/i915/ltphy: Program LT Phy Voltage Swing Suraj Kandpal
2025-10-24  6:39   ` Murthy, Arun R
2025-10-15  4:08 ` [PATCH 19/25] drm/i915/ltphy: Enable/Disable Tx after Non TBT Enable sequence Suraj Kandpal
2025-10-24  7:00   ` Murthy, Arun R
2025-10-15  4:08 ` [PATCH 20/25] drm/i915/ltphy: Define the LT Phy state compare function Suraj Kandpal
2025-10-24  7:03   ` Murthy, Arun R
2025-10-15  4:08 ` Suraj Kandpal [this message]
2025-10-24  7:14   ` [PATCH 21/25] drm/i915/ltphy: Define function to readout LT Phy PLL state Murthy, Arun R
2025-10-15  4:08 ` [PATCH 22/25] drm/i915/ltphy: Define LT PHY PLL state verify function Suraj Kandpal
2025-10-24  7:26   ` Murthy, Arun R
2025-10-15  4:08 ` [PATCH 23/25] drm/i915/display: Aux Enable and Display powerwell timeouts Suraj Kandpal
2025-10-24  7:32   ` Murthy, Arun R
2025-10-15  4:08 ` [PATCH 24/25] drm/i915/ltphy: Modify the step that need to by skipped Suraj Kandpal
2025-10-24  7:33   ` Murthy, Arun R
2025-10-15  4:08 ` [PATCH 25/25] drm/i915/ltphy: Implement HDMI Algo for Pll state Suraj Kandpal
2025-10-15  4:22 ` ✗ CI.checkpatch: warning for Enable LT PHY Patchwork
2025-10-15  4:23 ` ✓ CI.KUnit: success " Patchwork
2025-10-15  4:38 ` ✗ CI.checksparse: warning " Patchwork
2025-10-15  5:00 ` ✓ Xe.CI.BAT: success " Patchwork
2025-10-15 14:28 ` ✗ Xe.CI.Full: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251015040817.3431297-22-suraj.kandpal@intel.com \
    --to=suraj.kandpal@intel.com \
    --cc=ankit.k.nautiyal@intel.com \
    --cc=arun.r.murthy@intel.com \
    --cc=gustavo.sousa@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=intel-xe@lists.freedesktop.org \
    --cc=lucas.demarchi@intel.com \
    --cc=uma.shankar@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox