[PATCH 01/34] ARM: dts: qcom: sdx55: Fix PCIe wake GPIO polarity

[Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>]

The PCIe WAKE# signal is active-low as defined in the PCIe Base
Specification. Fix the wake-gpios polarity by using GPIO_ACTIVE_LOW
instead of GPIO_ACTIVE_HIGH.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
---
 arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts b/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts
index d23b8ec08af4..0443a86899a9 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts
@@ -249,7 +249,7 @@ &pcie_phy {
 
 &pcie_rc {
 	perst-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 53 GPIO_ACTIVE_HIGH>;
+	wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
 
 	pinctrl-0 = <&pcie_default>;
 	pinctrl-names = "default";

-- 
2.34.1