Re: [PATCH 34/34] arm64: dts: qcom: sm8550: Move PCIe phy and GPIOs to root port node

[Neil Armstrong <neil.armstrong@linaro.org>]

On 9/10/26 15:29, Krishna Chaitanya Chundru wrote:
> The PCIe phy reference and the perst/wake GPIO properties are
> per root port and belong in the root port node (pcie@0), not in the
> RC controller node. Move phys and phy-names from the controller to
> the existing pcieport0 and newly labeled pcie1_port0, allowing
> board-level overrides. Move perst-gpios/wake-gpios from the
> controller overrides to the respective port nodes in the board files,
> renaming perst-gpios to reset-gpios to match the binding used in the
> root port context.
> 
> Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
> ---
>   arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi             | 16 ++++++++++------
>   arch/arm64/boot/dts/qcom/sm8550-hdk.dts                  | 14 ++++++++------
>   arch/arm64/boot/dts/qcom/sm8550-mtp.dts                  | 16 ++++++++++------
>   arch/arm64/boot/dts/qcom/sm8550-qrd.dts                  |  6 +++---
>   arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts          |  7 +++++--
>   .../boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts     |  8 +++++---
>   arch/arm64/boot/dts/qcom/sm8550.dtsi                     | 10 ++++------
>   7 files changed, 45 insertions(+), 32 deletions(-)
> 
<snip>

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

Thanks,
Neil