[PATCH 17/34] arm64: dts: qcom: talos: Fix PCIe wake GPIO polarity

[Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>]

The PCIe WAKE# signal is active-low as defined in the PCIe Base
Specification. Fix the wake-gpios polarity by using GPIO_ACTIVE_LOW
instead of GPIO_ACTIVE_HIGH.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/qcs615-ride.dts    | 2 +-
 arch/arm64/boot/dts/qcom/talos-evk-som.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
index 047b4efb04b9..43f110ba3a7c 100644
--- a/arch/arm64/boot/dts/qcom/qcs615-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
@@ -445,7 +445,7 @@ &mdss_dsi0_phy {
 
 &pcie {
 	perst-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
+	wake-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>;
 
 	pinctrl-0 = <&pcie_default_state>;
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/qcom/talos-evk-som.dtsi b/arch/arm64/boot/dts/qcom/talos-evk-som.dtsi
index a31bed7fad07..198f656bddf1 100644
--- a/arch/arm64/boot/dts/qcom/talos-evk-som.dtsi
+++ b/arch/arm64/boot/dts/qcom/talos-evk-som.dtsi
@@ -367,7 +367,7 @@ &mdss_dsi0_phy {
 
 &pcie {
 	perst-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
+	wake-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>;
 
 	pinctrl-0 = <&pcie_default_state>;
 	pinctrl-names = "default";

-- 
2.34.1